I recently installed Ubuntu Server 11.04 (32bit) and noticed that even if the setup identify my keyboard so wont it apply this setting to the system. Setup IDed my keyboard as a 'se' but when typing does it act like a 'en' keyboard, is replaced with ([';).
View 3 Replies
I installed server 10.10, but it has the wrong keyboard layout. Can i change it to swedish via ssh, because the keyboard preferences wont start via the vnc?
View 1 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedHowever - is there such a thing as a decent HTML editor like dreamweaver? Komposer is buggy as hell - useless! Bluegriffon, well umm - screen fonts are bizarre, especially in viewing source code - brake down, multicoloured obviously a bug - no deb either, looks like a windows program install (?). This does look really good, but is unusable as I cant see in souce code view without getting a headache! Also, ignores css on links.
Seamonkey - you have to open browser then editor, then open your file. Ignores css totally. Amaya - ignores used fonts unless you re-edit - and ignores css on links. Weird way to select things as well, such as images. There must be at least one decent editor?
My apache ignores index files (index.php ,index.html ,index.htm , ...) and while these files exists in directory apache lists directory content!I mean http://localhost/test/ lists directory content instead of showing index.php!
View 9 Replies View RelatedI installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I recently got a new keyboard, and went with a Razer RZ03-0018. It's not working. I have Swedish as my default language, but it defaults to... enUS I believe. In System > Preferences > Keyboard > Layouts, I can't find the keyboard listed anywhere, and even though I have it set to "Swedish", I still get that weird enUS layout
View 3 Replies View RelatedI'd like to change around my keyboard layout a bit and can't figure out how. I'd really like to swap f1 and f7, f11 and f2, right alt and escape, backspace and caps lock, and a few of the letter keys. Is there any easy way to do this? (It's a confusing story about why I want to swap the f keys) Gnome, if it matters.
View 7 Replies View Relatedmy keyboard layout keep changing from windows to windows. When I am using my French keyboard, I set the keyboard to English and it doesn't make the change for all the open windows, despite having selected the "separate layout for each windows" unselected.Plus if I am in firefox with a French layout go to another windows and come back to the firefox windows, the layout is back to GBR.
View 4 Replies View RelatedI've got an odd problem with the keyboard layout options.
I use caps as an additional control, as set in Keyboard Preferences > Layout > Options. However, I recently came across an issue where Shift + Space does not send space, so I go into the options to set space at any level to fix it, and while the option appears to have been selected, there is no change in behavior.
Whats going on?
I recently decided to try out the Dvorak layout, and manually rearranged my keys today. For those who do not know:
Dvorak is a keyboard layout designed in the 1930's that is designed for comfort and speed. It is reported as being easier to learn than Qwerty, and more comfortable as well. Keep in mind that you can still type in Qwerty after you manually change your keyboard to Dvorak.
First, for those who want a Dvorak keyboard, you don't! You can rearrange the keys on your existing keyboard like I did. To do so, insert the dull end of a fingernail clipper (or other long, thing object) into the area between two keys on your keyboard. Be sure to unplug your keyboard first, or you might end up typing ksiwmvosioiwjefoakjsdfj;ls.xoqw, or worse, triggering a system shortcut.
Be sure to look at a picture of the current Dvorak layout first. Once you have removed the necessary keys, line up the male end of a key with the female end of the location it needs to be. Press down hard! You tap the key in its new location a few times before you proceed. Some of the keys on my keyboard were different. On my keyboard, the F and J keys and their slots were different than the rest of the keyboard. These keys sunk when pressed. To avoid this, I put these keys in upside down, as you can see in the first example.
Once you have placed all of the keys, plug your keyboard back in. Type something. You'll notice that everything is completely normal, except your keyboard looks like the something from Carmen Sandiego: Word Detective. In order to type in Dvorak, you will need to add the Dvorak keyboard layout. Doing so is simple. Go to System>Preferences>Keyboard. Go to the layout tab, and click "Add...".
If you are limited on screen space, or don't want to spend a century scrolling down to the bottom of the list, go to the "By language" tab, select English as the Language, and select USA Dvorak as the layout. If you want, you can disable "Separate layout for each window". Now, click on USA Dvorak and click "Options...". You will want to change Alt/Win behavior to "Meta is mapped to Win keys". Also disable anything under "Key(s) to change layout".
Now, click on "USA" in the notification area and notice that it says "USA2". You should now be able to type in Dvorak. Try typing something! Be amazed at how slow you are. Next, try out a keyboard shortcut. If you have Compiz, some of your shortcuts might not work. For those shortcuts that don't apply to Compiz, try rebinding them in Keyboard Shortcuts. To fix Compiz using Qwerty for shortcuts, press alt F2 and run this command:
Code:
compiz --replace --sm-disable --ignore-desktop-hints
Also, you should change the layout on your login screen next time you login. Don't want to type ekrpat, now do we? Unfortunately, after finishing righting this, I discovered Colemak...
I have an Ubuntu server running on a VM. I'm accessing this system mainly remotely, and usually with a console connection. I export the output of some applications (like Skype, Google Chrome etc.) to my Windows desktop, where I run Xming as my X server. Everything works pretty neat, but... I can't change the keyboard layout, because the applications are running on the remote machine. So is there a way to change the keyboard layout in CLI?
View 5 Replies View RelatedA few months ago I upgraded one of my Ubuntu boxes to 10.04.1 and haven't been able to switch keyboard layouts ever since. I have US and Russian Phonetic keyboards and used to be able to switch between them using the keyboard switching panel applet back when I was using Karmic Koala. Now the applet is gone and not even available in the list of applets.
I understand the applet has been removed in the new Ubuntu. But why? And what other means of switching keyboard layouts are available now?
The trouble is that I have never been able to switch layouts without the applet -- none of the keyboard shortcuts I tried under Preferences > Keyboard > Layouts ever worked in any version of Ubuntu. Now I can't even test the Russian layout inside the Layouts tab, i.e. when I select Russian Phonetic and type something in the test box below I keep getting US layout characters.
i have ubuntu installed on my vps and when i open terminal or office to write something i type for example a i then get f on the screen?
i go to keyboard preferences and add my country layout which is sweden ..but it doesnt change even after that.
How can I view the keyboard layout? Sometimes I need to write things in a different language, and I can't find the keys that go with certain symbols. How can I view the keyboard map? In Ubuntu this is easy, but I can't find anything in Kubuntu.
View 2 Replies View RelatedI made the mistake to install Ubuntu 11.04 without trying it first from a live usb. After 15 minutes switched to classic theme (Unity seems to netbook oriented and confusing to me). After 2 days I am about to go back to my beloved Ubuntu 10.10.
I added some keyboard layouts and also specified alt+shift as the command to switch between layouts. Unfortunately it is not working!
Just recently started to use ubuntu live usb 10.10, Everything is good except some of the symbols such as the # is not the same as it appears on my keyboard, I was not asked for keyboard settings only when I boot up what language I want to use and if i would like to make a full install
How do I configure the keyboard layout?
I am using a fresh Ubuntu 9.10 installation with english-only language but with a German keyboard.
So, once booted into my (only) account, I use the Keyboard Preferences app to change my Layout from US to German. Which works. I also remove the US keyboard so that the only layout left is German.
But upon a reboot, not only the US kbd is back in the layouts list, but the kbd also has defaulted back to US, so that I have to open the Kbd Prefs to again remove the US layout to get my German layout active again.
I also tried "Apply System-wide" and even logged in as root to make the same changes, but the system always goes back to US layout after a reboot.
This is also a problem when logging in after a reboot - I want the system to use German layout there, too.
So, how do I change the layout globally so that even at the login page I have my German layout already active?
My R key isn't working anymore. I use Karmic Koala.
The keyboard preferences is set up for different languages, but that's not my problem.
I'd like to make it so when I type the key to the left of 1 (the one that types out ` and ~) that it types R.
There have been some posts on this forum about custom keyboard layouts, but the latest one was more than three years ago, and is outdated. I found the following code for a custom dvorak international keyboard layout here, but it directs me to copy this code into the folder /etc/X11/xkb/symbols/pc, a folder which does not seem to exist in 9.10 or 9.04.
Code:
As this is the only thing I felt Windows did better than Ubuntu (custom keyboard layouts), I would love to be able to change the layout and finally seal the deal with Ubuntu.
According to this article, one could create a custom keyboard layout.
While i look in the /ect/x11/xkb/ repertory i find a base.xml file only, no keyboard layouts as the article suggests.
Where can i find my keyboard layouts so i can edit them?
I'm rly poundering on the following problem. For our school assignment we need to make a liveCD (just a part of the assignment). I've stripped down a default ubuntu 9.10 . But I need to default keyboard layout to be azerty (belgium). When I run the liveCD in virtualbox and do dpkg -reconfigure console-setup it's all good.
But when I do it in chroot to change the liveCD, it gives an OK etc but when I pack it into an ISO again and run it ... Again US keyboard layout. Even on startup when I change the keymap it doesn't change to azerty... I rly don't know what to try now..
I've got an UK keyboard, and every time I boot up, Ubuntu keep reverting back to the US keyboard layout which is annoying me. I open up keyboard preferences, the UK layout is already selected. So I delete the US layout, click on "Apply System-wide" and it works. Until I reboot and the US layout is back in there! I suspect it's something to do with not having admin privileges to permanently save the changes - if this is the case, why it doesn't ask me for my password, or give me a chance to escalate my privileges or something?
View 2 Replies View RelatedRecently upgraded to Lucid and now I can't find that applet anywhere. Was it removed from Lucid or moved somewhere?
View 1 Replies View RelatedI'm actually using two keyboard layouts: Lam and Rus (Spanish Latin America and Phonetic Russian) but everytime I restart or turn on my computer, the russian layout changes and shifts into another, although spanish layout still works fine. How can I fix this? This is: What can I do to use both layouts even restarting my computer? Note: Latin American layout works fine after restart. I'm using Ubuntu 8.04 LTS
View 2 Replies View Related
