I have my desktop at home installed with Ubuntu 11.04. I set up remote desktop through the native remote desktop server program. I can connect to the server from my remote Ubuntu 10.10 laptop, and it works*. The problem is, it is painfully slow -> lags at least 5 seconds for every input.
View 9 RepliesI have this network
desktop ultimate edition 2.4 (ubuntu 9.4)
laptop ubuntu 9.10
ethernet network
on ubuntu remote desktop is slow in general
on windows much faster !
is there anything special that I should do ?
I'm an Ubuntu user since Jaunty, and I've always upgraded my system (NOT fresh install). Everything went fine, but yesterday I upgraded to Lucid. My only concern -for now- deals with startup time. I'm a desktop user (Core2@3GHz) so I think I should boot in less than 10 seconds. Anyway, boot time is 30 seconds - not too much, but there is definetly something wrong with tools I don't know (ureadahead, plymouth, etc.). Attached is my bootchart: can anyone explain me what's wrong?
Also, I don't even see a plymouth Ubuntu themed bootsplash: I only see a blank (black) screen standing for seconds, then I see the bootsplash for less then half a second, then GDM appears :S Not crucial -I know- but how can I fix it? (I don't know if it's related, but I can see the animation at shutdown)Finally, GNOME desktop takes too long to load. I don't know why, but there are 15/30 seconds in between login sound and a usable desktop (with panels and icons, I mean).Please help me, I don't want to do a fresh install. Boot speed is not a dial with desktops - I know - but it can be a symptom that my system is a bit a messy (and I don't like it, since I installed Jaunty less then 1 year ago). (!Forgot! I also installed grub2 by hand
I maintain plain vanilla Ubuntu 10.04 systems for several friends. Each machine has only one user, the owner. I use Remote Desktop to instruct and to perform maintenance. Here's my problem:After updating the system, if the kernel has changed, a restart is needed. If I do a restart, I then have to phone the owner to insert his login credentials in the gdm login screen, before I can do anything else via Remote Desktop on that machine.There ought to be a simple way I can avoid the phone call and login myself.
I'd strongly prefer not to use any software that is not included in a plain vanilla Ubuntu 10.04 installation. And I don't want to weaken system security beyond what it is now.Is there a solution? Or, what is the simplest solution?
I'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies View RelatedI have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies View RelatedI had downloaded "GTK-Recorder" in order 4 Desktop Recording...
whenever i start it,it first make my PC quite bit-Slow,and also his recording is quite slow.....i want a recorder which is quite fast in recording and doesn't really effect my Computer performance...
I am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
View 1 Replies View RelatedI am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies View RelatedIs there a way to have drag and drop access between Linux and a Windows remote desktop connection?
View 1 Replies View RelatedI have VMware server installed on this machine. I also have a Windows XP VM running all the time. I have it bridged so it gets a valid IP from my router and such and is in my network. I use KRDC to remote desktop to it and I make it full screen. However if I want to go back to my desktop I have to minimize KRDC.
Is there a RPD client out there I can use so I can go full screen on 1 desktop and have everything else on another desktop then use KDE's Desktop switcher or ctrl+alt+arrow keys to switch between desktops to flip between Windows XP and Linux without having to minimize?
FTP from and from my home computers to 2 remote servers has become really slow over the past month. One of the remote servers I manage and the other one is taken care of by a hosting company, so I am thinking the problem is residing on my end. It doesn't matter if I am downloading 1 file or 10 files, they are all coming in at 9 kb/s which is really slow cause I have a 7 megabit connection. I've tried using multiple computers and still have the same problem. I am using proftp for the ftp server and filezilla for the client.
View 4 Replies View RelatedI got an old PC I am using as a game server (Counter Strike and Left 4 Dead), it's a dual core Athlon 5000+ with 2GB Ram, the motherboard is kinda old and has a SiS Chipset with terrible graphics causing the video to flicker at somewhat high resolutions (anything above 1280x1024 will cause problems).I decided to add a Geforce 8400GS just so I don't have to deal with that terrible onboard VGA, upon installing the card I noticed the VNC is unusable, awfully slow over a 1gbps lan. I have installed the kmod drivers and it hasn't changed anything
View 4 Replies View RelatedMy server is connected to the Internet for ssh on port 22 with root logon disabled, a single non-dictionary word user name allowed, and pki authentication only (about as secure as I can make it). I've previously run fc5 and 9 servers using the same sshd config since 2006 and had no security troubles, so I'm happy, but.. After the fc13 install and configuration, logins from a host on a remote network are taking about 1m 30s to complete! A (partial) console output for ssh -vv appears below. The lines marked with "**" were the lines after which significant pauses happen. This is fully repeatable.
Code:
debug1: Next authentication method: publickey
debug1: Offering public key:
debug2: we sent a publickey packet, wait for reply
[code]....
I've been using Linux on a more regular basis for the last two months now and have been able to find replacements for most of the software i use in Windows, or by using Wine. But i have one big problem that is keeping me from switching permanently to Linux. I frequently use remote control software to access and control my computers, both at home and to access my computers from remote places over the internet. I've been using NetOp, and more recently RealVNC. The client, or "viewer" part of RealVNC is working fine in both Windows and Linux. It's the host or server part that i can't get to work properly when it comes to VNC. The vnc.so module doesn't work on my system, x0vncserver program seems rather useless since it refuses to load before i have a network connection and this prevents me from start the program automatically as the wireless connection isn't ready and the vncserver command isn't an option since it doesn't display what i see on the actual screen. So, does anyone have a nice solution to this problem? Either to make VNC work or suggest some software that does. Anyway, it has to work on both Windows and Linux, in Linux it has to display the native x display, there must be built-in encryption and preferably be free or open-source software. I'm using Ubuntu 9.10.
View 5 Replies View RelatedI've been used to using RDP on Windows to remote to machines, and I've got an asus eee 701 which I want to use to do some *nix programming on. While the eee is a lovely little machine the screen and keyboard are a little small to use for lots of programming. I've tried using Xming (the free version) to remote login into the eee from my desktop using XDMCP (or even using a ssh session as a straight X11 server and no desktop on the eee) the whole thing seems seriously slow over wifi the initial desktop takes at least 5 seconds to paint (might even be 10 seconds I haven't actually timed it). So my real question is what do other folks use for remote control with a GUI for their *nix boxes? I am finding it hard to believe the performance is so bad over a wifi network (It makes the Mac IIs I used to use a college in 1988 seem fast) or is this just a problem with Xming and using say the Cygwin X11 server would be better.
View 3 Replies View RelatedI have one headless squeeze and two notebooks (one squeeze, one lenny).
When I have X (on headless squeeze) on lenny notebook, it is unacceptably slow. Something like it takes 3-10 seconds to redraw window (acroread, iceweasel, possibly xterm.)
It is not so slow when I use squeeze notebook. Yesterday, I upgraded lenny one to squeeze. Then, it is not slow any more!
I have 2 ubuntu machines. I used to use the ubuntu's remote desktop program to work remotely from home on my office box, but since I installed 10.04 it remotes in ok but nothing gets changed on the screen when I click. I see the mouse move fine. If I click on something and then drive to the office I see the remote screen was in fact clicked on with random windows open, depending on what i was clicking on. Why is the screen not refreshing?
View 2 Replies View RelatedI've run into a bit of a problem with an attempt to remotely admin a friend's computer. Here's the basic layout:
--My Ubuntu is connected via wireless router, port 22 forwarded properly. I can ssh in and out as I please to other hosts.
--Across the internet, their Eeebuntu is behind a router as well. Port 22 may or may not be properly forwarded. Nobody in that house really knows how to access their router. (I accept this may be an issue I'll need to handle)
What I'd like to do:First priority, ssh access to the remote Eeebuntu.Assuming the remote router does not forward port 22, would I be able to have the remote computer remote forward, say my local port 10022 to remote 10022, thus allowing me to ssh user@localhost:10022 and bypass the need to access the router?
Lower priority, prepare a bash script for my friend to download that would require one input of the root password, and go through the full process of installing OpenSSH, setting up the server, and initiating contact to my computer. The ideal situation is allowing my friend to start the computer, run one script, type in one password, and walk away.Any ideas for better remote admin options are welcome, as well as comments/suggestions from anyone who has attempted this backwards form of ssh access.
I am using Ubuntu 9.10. I can do remote desktop into the system with a monitor attached but when I reboot the system without a monitor attached I am unable to do remote desktop into it.
I want to use this system as a headless system and only use remote desktop to control it.
So I guess I need to start X and gnome without a monitor attached.
What do I need to do to get this to run?
is remote desktop from windows to ubuntu possible?
so far i googling, only found from ubuntu to windows.
i installed 10.04. when i try to dial into my work pc using my work VPN which uses Sonicwall using SSL-VPN technology. It works fine using older versions of Ubuntu, other linux versions, and XP or Vista. Using 10.04, I can login just fine, but when I get into the remote desktop, my keyboard does not work. the mouse works fine. I am using the newest version of java (1.6-20) with Ubuntu 10.04. I don't think I am using this version of java in the other linux versions, so I'm not sure if this is a problem with java, Ubuntu, or something else. i got the kb to work by pressing cntl-J, typing stty sane, then ctrl-J again, which is something I remembered from a long time ago..
View 2 Replies View RelatedI have access to my linux home server , through ssh
I wanna start using now remote desktop , so i can connect to my home server through vnc.
I've tried this old post here , but I could not connect
What I did was to ssh with putty (and Xming) and X11 forwarding on , to start vino-preferences , which seemed to work BUT even though I connect with vnc to my remote server , all I see is grey stripes....
PS I have forwarded port 5500,5800 and 5900 to my home server pc of course
remote desktop requires authentication on server side when trying to login remotely via VNC. I have the option set to not require confirmation of each access to the machine, I set a password that the user must enter from the client side.just testing this locally over my LAN, VNC connects and asks for a password(the user field is blank; might be nice to have to enter a valid username and password so I don't have to share a general password). after entering the password on the client, a window pops up on the server 'An application wants access to the keyring Default but it is locked' and requires me to enter a password, which once I do then the VNC gets control and all is good... but obviously if I am trying to remote further than down the hall this won't work.
Ideally I would like to remote into ubuntu desktop with account credentials from the server and require no physical person at the server to allow access. I currently have an XP pro box setup this way with remote desktop and works flawlessly. I want to keep it true to the same functionality where when I log in remotely it joins a session with applications already running, such as a web browser and mail client, with those applications left running when I logout of the remote session. its not all that important if it locks the server side locally as there will eventually be no physical access to the machine once its been setup.
as you may have noticed I am fairly new to linux, but very willing to learn. my primary reason to move to the linux platform is that I am hoping it will provide better performance than windows XP/windows 7 when I upgrade the box to an atom based mainboard. any other thoughts or recommendations on my planned setup would be greatly appreciated as well.just to be clear, the 'server' is ubuntu desktop and client side is generally windows XP, windows 7, windows server (I work almost exclusively on windows boxes)
How/where can I configure remote desktop so that other PC can access my lubuntu, since lubuntu doesn't has "System -> Preferences -> Remote Desktop".
View 6 Replies View RelatedSet up my mom with Ubuntu and want to be able to connect to her computer remotely to help her out when she has a question. I did some search and it seems that everyone recommends using openSSH. I used this link [url]
To install it on my mom's computer (changed the port to 16 instead of 22 and added those lines he suggested to the end of that file). Now what? I can't seem to find any instruction to connect the two computers. Looking around I also found:
1- Remote Desktop Viewer
2- Terminal Server Client
under applications/internet and
3- Remote Desktop under preferences
It looks like I can use those to connect also. But are they related to openSSH? Should I uninstall openSSH and use 1,2 or 3? Which is moe secure or are they the same.
I want to be able to use my desktop from work over VNC but it won't let me connect. In the Remote Desktop Preferences I have "Allow other users to view your desktop" checked and I also have "Allow other users to control your desktop" checked. But it says below that "Your desktop is only reachable over the local network. Others can access your computer using the address 192.168.1.10 or brownserver.local."
Under the Security section I have "Require user to enter this password" checked and I've filled in a password for it.
I've also port forwarded port 5900 to my desktop on my router so that shouldn't be an issue either. When I attempt to connect over the internet from my laptop I get a message that says that the connection was refused. So I think my request is at least making it to the desktop, it's just that the desktop doesn't want to allow it.
One quick question though....I'm not sure, but I might have changed the default port on which VNC is listening on this machine. I don't remember if I did or not. And if I did, I don't remember how I did it. Could someone point me in the proper direction to see which port remote desktop is listening on?
I have a desktop with Ubuntu 10.10 along with a laptop with Ubuntu 10.10. I have configured Remote Desktop with the following settings on both machines. However, on either machine, I go to Terminal Server Client. I type in the IP address and I hit connect (with RDP selected) and I get this error.
Or using VNC: An Error Occurred.
I was wondering what the best way to secure RD would be? What's the best one to use? I'd prefer a method that isn't always active, so maybe something that I need to enable via ssh first?
View 4 Replies View Related