I wanted to format my Flash USB drive !! and by mistake i choose my external Hard Drive (NTFS) and formated the drive gain to NTFS later when i released that this is not the USB flash drive it was too late to abort or do anything
is there any way to recover my lost data ?! i mean i know about the tools like Recuva ! But the problems that it recover data mixed up in each other
I'm on the latest Ubuntu OS on my netbook trying to make a USB Startup Disk. I have a 1GB USB and a 500GB hard drive plugged in to then netbook. I run the USB Startup Disk program, and it tells me I need to format the USB drive. Okay, so I press format, only to realize that I'm formatting the 500GB hard drive.However, when I pressed format it give me an error saying the disk could not be mounted. I did something on Disk Utility and now I have a FAT32 system on the hard drive with nothing in it. Now my ultimate question is, am I able to recover the data that was on the hard drive?The hard drive was formatted in HFS+, it was a Mac-formatted hard drive. Will I need to use a Mac in order to try to restore my files?
View 5 Replies View RelatedI did something to my Windows partition that seams to be unrecoverable,so I thought that I would get my hard drive re-formated. But, I want to store my OS image (I'm sure that thats the right term... I'm just gonna hop you lknow what I'm talking about) on a CD. I know programs that do this for windows but I don't know any that can do this for Linux/Ubuntu.
View 2 Replies View RelatedIs there any way to make windows recognise my second hard drive (Which is fully exclusive to ubuntu) and access it? Iv'e been getting a few BSOD's since installing ubuntu and I'm pretty sure it's because windows keeps trying to access it and failing.
View 2 Replies View RelatedIve got a Sony GRt816S laptop which Im trying to install 10.10 on to a freshly formatted hard drive. I downloaded the file burnt it to disk and tried to run it. I get to the first screen where It asks me if i want to run for CD, install or do memory check. - memory checks works fine but the install and run from CD options just hang before I get anywhere near an actual install screen (or anything that remotely looks like one)
I just see a purple ubuntu screen with 4 dots which alternate between red and white ocassionally. I've left it running over night and nothing happens.I read on the forum that it might be the original file, so tested it on a different pc and it worked fine. I know what Im doing with PCs but am a total novice when it comes to Linux, ubuntu or anything thing non-windows related .
I have recently gotten hold of a device that helps me plug my old ATA/IDE hard drive to my computer and view my old files that I wish to recover. I am using Ubuntu and the harddrive that I wish to retrieve the data from also has an Ubuntu install on it. The files I wish to recover are old .doc files, which I want to keep to remember my old writings.
The problem I have encountered arises when I wish to open some of the files. The icon for some of the files, which happen to be my best writings, has an X on the top right, indicating that I cannot view the contents. When I click on the files, the following error message pops up: "Access to /media/c885571b-a6e5-4a2d-937a-78af7050910/george/Courses/hist388/Passion.doc was denied."
Now, I am guessing that I need to be able to log in as superuser or something to be able to access these files, so I logged in my terminal as super user by following the instructions outlined on this page: [url]
I still did not have the sufficient access required to be able to open the files that I would like to retrieve.
I am trying to transfer files from a SATA hard drive with Windows Vista (Home Premium) installed on it. Some files I can easily copy over, others just say Access Denied.
I'm sure permissions is part of the issue, unofrtunately Windows is unable to boot at all (surpise surprise) so I can't adjust anything from within in. I know with XP drives I can easily copy and paste onto my Ubuntu machine. I'm using a SATA to USB converter that let's me plug it in and my desktop reads it like an external hard drive.
I've gone into the properties and under permissions it shows my account as having access to Create and delete files under folder access amd "---" under File access. My group and others show None and --- for Folder and File access. I can post a link to a screenshot tomorrow. I've tried to also select Read and Write for File access but it goes back to the dashes before I can apply it.
I am running 64 bit Ubuntu 9.10 and do not have the sharing aspect installed. Any questions please feel free to ask me.
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND:
dmesg | grep drive
hda: MAXTOR STM3160215A, ATA DISK drive
hdb: WDC WD800BB-55JKC0, ATA DISK drive
[Code].....
OK, was trying to make a live-usb boot partition on my 1.5TB HD; in doing so clicked a 'wipe disk' button.
A second later I realised what I'd done, clicked cancel (frantically), tried to unmount the drive but was told 'volume busy'. In a panic, unplugged the drive. Unsurprisingly, the drive is now a mess.
I'd had 1 30G FAT32 partition (empty) at sdd1, 1 1.5TB ext4 partition with about 500G of data at sdd2. Now according to gparted I have an unrecognised filesystem type; according to the 'Disk Utility' I have an unmountable 1.5TB FAT32 drive.
I know NOTHING about data recovery. If it's just a case of running a couple of magic 'check & fix' programs then I should be OK, but anything else and I'll have to take it to more skilled friends.
I was trying to fix some hardware on my laptop and i ended up mucking the whole thing up. The HDD seems to fine though. I have it in a external HDD enclosure and it's plugged into my mothers desktop through usb.I'm trying to print some files I have, but my home directory on the external HDD is encrypted.
View 3 Replies View Relatedstart getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
I have an external USB hard drive that I need to recover some data from, but I see from fdisk -l that the partition uses LVM:
Code:
[root@localhost ~]# fdisk -l /dev/sdd
Disk /dev/sdd: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I've followed various lvm tutorials all of which describe setting up lvm from fresh on empty disks. Unfortunately non mention how to 'install' new a drive that was previously set up with lvm. I have had a go anyway and may have now lost my data. Here's what I've ended up with (the partition in question is sdd1):
Code:
[root@localhost ~]# pvdisplay
--- Physical volume ---
PV Name /dev/sdd1
VG Name vg02
[code]....
I've tried mounting with other fstypes, but all give the same error.
I'm trying to fix my girlfriend's computer which is running OS X, which will boot but doesn't work beyond the login screen. I've removed the hard drive and can access most of the files, but she encrypted her home directory with "Filevault" and I think her home directory automatically mounts from some image somewhere. She does remember her password, but I'm not really sure where the encrypted files are on the hard drive and I'm not sure how to unencrypt them.I was thinking of trying to boot the external hard drive in some kind of virtual machine, but I don't know how to do that either.
View 6 Replies View RelatedWhile trying to create a bootable SD to install Ubuntu on a netbook, I accidentally formatted a part of a removable HDD that was connected to my computer. If I remember correctly, the partition I formatted wasn't the main partition of the HDD. In that case, does it make sense that the whole disk was wiped out? On that HDD there's a year worth of work, I really need that back.
I was using PhotoRec with some luck: it started to recover files, but with no names, which is almost useless, considering a lot of it are recordings - useless without their names. Is there any good recovery program that will recover all my files incl. names? Is there a easier oprtion, considering that I think I didn't really format the big partition of the HDD? What may it have been, the small partition?
I just installed kubuntu 10.10, replacing an older installation. I have three hard drives one of which had all of the data I wanted to save, about 500gb. I repartitioned and formatted the other two drives and made sure that the data drive would be mounted but not formatted. When I booted into my new installation, the data drive was blank. I'm not sure if it's relevant, but I had just upgraded the file system from ext2 to ext4 before starting the installation.
I've been trying to recover my lost partition with testdisk. The website has instructions for recovering a formatted partition. It looks like it's working until the instructions tell me to choose Boot and RebuildBS, which I don't see as options. Can anyone give me any advice on how to recover? How did this even happen? Has anyone had a similar issue with installation?
I am in the process of recovering data from some damaged hard drives.
I am copying the data to a recovery folder on the safe system disk where it is being sorted.
Some of the data/files I do not want to keep.
I want to delete them.
However the permissions are such that it will not let me.
I need to be root.
I don't really want to flaff about in the 1980's geek terminal environment ... just want to right click and select delete.
Is there any way within the GUI to be as one with Root, all powerful, all seeing ......
I learned a couple of days ago why you should do regular backups. Left my laptop working for the day in hot weather. When I came back it had crashed. On reboot it no longer booted up. I could still access the BIOS and boot from alternative media but not from the hard drive. The laptop tried to access the hard disk for a couple of minutes (hard drive light was blinking) and then failed. I made an ubuntu live usb stick and am currently working from there, trying to access my hard drive so I could image my data on another disk before sending the laptop for repairs. All my data is on that disk including my passwords and the password for this site conveniently so I had to register a new account to post this thread.
The laptop is IBM Thinkpad X41. The hard drive is accessed during when boot options are presented, again when the live cd boots up and determines the hardware available and also when manually probing for hard disks using the script below. The hard disk however does not show up in dev. If I could get so far to get it there, I could use dd_rescue to image it away. My hope lies in that the drive still spins up and is accessed producing error messages, however indicating that the system still knows it exists. Excerpt from dmesg concerning the drive:
[Code].....
I have a few hard disks fully encrypted with Truecrypt. They have not been partitioned, just encoded right of the bat with Truecrypt. I just use Truecrypt command line to mount them, supplying password whe asked.
So from a linux standpoint, they show up as disks with unallocated space.
But I recently updated (moved) my linux from Ubuntu to Kubuntu. In the process, the partition manager asked where to install the new OS, I answered erase existing system and install there. But I noticed too late that the install program decided to install GRUB on another disk, one of my encrypted disks, instead of the system disk already selected. I don't know why, but it did. Now this disk shows up in linux as a disk with multiple partitions, and of course I can no longer mount it with Truecrypt.
I haven't done anything with the disk, except from trying to mount it in Truecrypt. So apart from the GRUB install, nothing else was touched on the disk.
I know Truecrypt place a backup header towards the end of the encrypted disk, so it should still be there intact, but since I now have multiple partitions, Truecrypt is certainly confused and cannot see the end of the disk since I now have 4 of them (partitions).
I am not a beginner but I am hesitant to attempt something that could kill all hopes of recovering the disk. It is a 2TB disk with a lot of data on it. I could probably make a copy of the entire disk but this means buying another 2TB disk....
One of the first idea was to kill the current partition setup to leave it "unpartitionned", so like it was before, maybe Truecrypt will now find the backup header. But before I do so, I would like opinion of real experts on linux.
So I currently have OSX and Windows 7 install on my hardrive - I would like to add 10.04 in the mix, however it will not let me resize my Windows partition because it does not recognize it as ntfs. It will not let me mount it via cli or gui and gparted will only offer to remove the partition - not resize.
View 1 Replies View RelatedCould I please have some recommendations for Data Recovery of a Formatted Drive. There are so many choices out there that I don't know which one I wanna use.
View 4 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI have a 60 GB Hitachi hard drive and a Rosewill drive enclosure. The drive originally ran Ubuntu on my laptop. I reformated a couple of times with a different formats and it works in Ubuntu. However, Win XP and Windows 7 reads and loads the enclosure but the drive never mounts nor is it visible in explorer.
View 2 Replies View RelatedI formatted a thumb drive on Windows (not quick format) that contains files I need (video files). Unfortunately, my attempt to recover them with both PhotoRec and TestDisk failed: neither of them found the files. I know they are still there because I scanned it with some Windows software (File Scavenger) and it detected them. I'd like to try to do this with Linux, to figure out how to do it, and save money at the same time.
View 4 Replies View RelatedIs there any software for Ubuntu that can bring the files all back?
View 9 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
A friend of mine somehow managed to accidentally format her USB key the other day. It had all the photos of her daughter on it and she's more than a little upset about it.
I've told her not to fret too much just yet and that I'll have a look to see if there's any way to recover any of the data (specifically the photo's, she's not overly fussed about the rest)
I've had a look through the web, and foremost looks like it's the most promising option but I don't want to start messing around with it until I've asked my fellow ubuntu users for advice and thoughts.
let me know is there any package available in ubuntu for recovering data from the usb drive
View 6 Replies View Relatedhow to boot Ubuntu from USB flash drive that is formatted ext4?That is, making a portable ubuntu. But not merely a LiveUSB created using the 'Universal USB Installer' or 'UNetbootin' because the LiveUSBs created using these applications are formatted in FAT32 and uses a persistent partition just to save the changes and files.If I have your attention, what we want to achieve is a portable and bootable Ubuntu in a flash drive that is formatted in ext4.
View 9 Replies View RelatedI accidentally formatted a drive that was ext4 to NTFS in Windows (using quick format only). I tried TestDisk, it does find a deleted partition but doesn't seem to find any files or be able to recover anything. Is there any way I can recover the files?
View 1 Replies View RelatedI loaded Ubuntu 8.4 on a data drive (second drive no OS) from a Windows XP-SP3 system. I MEANT to load it on the main XP OS drive. Bottom line I formatted a FAT-32 with Ubuntu 8.4. Can I (freeware hopefully) roll back the Ubuntu formatted drive to FAT-32 so I can recover my data?
View 5 Replies View Related