After upgrading to 11.04 I find that if I launch ubuntuone my machine immediately slows to a crawl and there is intense hard drive activity.This persists for hours. Only solution so far is to close ubuntuone and remove it from list of startup applications. I have made no changes to the files marked for ubuntuone syncing, and everything worked fine in 10.10.
View 4 RepliesI have mysql server ( OS:FreeBSD) is have 8 cores cpus and 8GB RAM.
Sometime, Box's top is not showing the cpu utilization. Output looks as follows
last pid: 44258; load averages: 0.38, 0.42, 0.23 up 0+16:31:11 07:15:14
169 processes: 14 running, 136 sleeping, 19 waiting
CPU: % user, % nice, % system, % interrupt, % idle
[Code]....
Moreover, WCPU is >98%. But not much processes are running on that server.
get the info about cpu or box ?
1. How to proove that box is having CPU issue
2. Is it related to memory ?
Every time I upload files into the web onto my ubuntuone account the ubuntuone folder can't connect and synchronize my data. In the folder when I click connect, it does not work.
View 2 Replies View Relatedrecently my server become a little slow and lazy, so I started a small investigation what's going on and found out, that there is some problem with network.All processes which uses network are able to use 99% of CPU time when they got any requests. First time i thought it's only a bad configured Apache but after some research I found even FTP or SSH does it if they have to do something more (for example getting data to another server using rsync).So far I wasn't able to find a cause of this. No new software installed, only updated every few days. I have another server which have the same config, same software, same hardware and is updated in same days. But this one works without any problem. I think it's probably hardware (LAN) leaving me to it's creator. Is there some way how can I test if it's really LAN or just something bad happened to the system?
Also there is another issue - maximum speed dropped down to 20-30kB/s for both download or upload.It's Debian Lenny 2.6.22-6 if you need to know.
Iam handling mail server in redhat.MTA using is qmail.since last 1 month it get overload and get hang...since in morning its time for user to loging into mail through web interface.though suddenly login in to mail it get overload and server got hang.we need to restart the server...did not get time to kill https also some time MP port work to save us...still didnot get command to overcome the over load in server...
View 9 Replies View RelatedI chose a folder with 1.8 GB for syncing to the ubuntu one server. I have two questions:
1) ubuntuone-syncd has been using 99% cpu (at times) for two days now. Is this normal?
2) the syncing is EXTREMELY slow. I don't have any bandwidth limitations set and there seems to be very little data getting uploaded. Is this normal?
I signed up for Ubuntu One, but I am unable to install the ubuntuone-client-gnome. When I click on it, it does nothing. I installed the ppa .deb files. What do I do
View 2 Replies View RelatedI have got my contacts in my 'Ubuntu One Address Book' in evolution.
It is my understanding that they should sync to my ubuntu one account on the web.
My files and notes are syncing perfectly but the contacts are not.
I have ensured that the contacts box is ticked on the Ubuntu One menu thingy.
I'm running 9.10 and was using wicd instead of network-manager. So, I tried a few things to get u1 working under wicd and gave up.For other reasons, I switched back to using network-manager instead of wicd. Now I can't get u1 to re-install or uninstall or something!There is no ubuntuone-client-applet. I did tried installing:
Code:
ubuntuone-client-applet
The program 'ubuntuone-client-applet' is currently not installed. You can install it by typing:
[code]....
Any chances the UbuntuOne website will have thumbnails in the future?
View 2 Replies View RelatedPreviously I was running Ubuntu 10.10. I have since migrated both of my machines to Debian 6.0.1. Before migrating I backed up my previous Evolution configuration, and after installing Debian I restored it from that file. Everything worked great except that backup included my UbuntuOne CouchDB address book, which I never used. When I right click it and click "Delete", nothing happens. I'm guessing the files in .evolution that contain this information are binary because I've done a locate ubuntu and couldn't find anything in there. It's not a deal breaker, but I'd like to get rid of this unused address book from a different OS.
View 2 Replies View RelatedI've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I would like to try out the newest version of Synkron (1.6.1) on Ubuntu 10.04. How do I install it on a 64bit AMD machine? It is not in the default repositories and there are no deb packages for 64bit at [URL]? The deb version listed is for i383 1.6.0.
View 4 Replies View RelatedI've been happily using Ubuntu One for a few weeks now, synching some files and notes.
Today I inadvertently clicked another folder to 'synchronise with Ubuntu One'. This was a 500mb folder containing work and personal files which I'm not ready to rely on the cloud for.
I must admit I panicked a bit as I attempted to stop the synch. I deleted the entire folder (got it backed up on an external hd) and the synch stopped. I then logged in to the U-One website and deleted the folders and files it had uploaded by that point.
When I restored the folder from the ext hd it started to synch again. This time I removed my machine from the U-One preferences and eventually cancelled my account.
I have now restored that folder under a slightly different name so it doesn't try and synch it.
Meanwhile I've re-started my U-One account and have added my machine so it appears on the webpage. I've uploaded a file via the website. I've also been able to successfully synch Tomboy notes in both directions.
However, I can't synch files with my Home/Ubuntu One folder. I've attached screengrabs of the three tabs in U-One Preferences which show 'disconnected'. If I click 'connect' on the Devices tab, it simply greys out and nothing else happens.
Files in my Home/Ubuntu One folder all have the Unsynchronized emblem against them (a cloud with a cross in a red circle). code...
I thought I would give Ubuntu One a try, even though I have used DropBox for ages. I think it is all set up ok, yet the box is open and it says along the top:
Using 102.6 MB of 2.0 GB (5%)
File sync in progress......
It has said that for 5 hours now.....is it actually doing anything? I have closed it a couple of times, and opened it, and it goes right back to the same thing. What is more weird is there are no sent / receive lights flashing on my Modem either.
U1 is trying to sync a file which doesn't exist on any of the devices attached to the account nor in the cloud folder. I've tried using U1sdtool to stop it, including the following commands:
I've also tried actually creating a file of the same name that it keeps trying to sync in the hopes that it will latch onto that one instead, but no go. I tried deleting that file, but no go. It constantly loops through the same nonexistent file, over and over and over and over and over...
It also only does this on one device. It does not do that on the other devices.
And, yes, I've done u1sdtool --waiting, and there is the nonexistent file, on the list, with all of the real files that actually do need to be synced backed up behind it.
I have updated to 10.04 on my desktop and on my Dell Inspiron 8200 laptop.What I would like to do is have the machines automatically synchronise working files as they change on each machine. I have found backup programs but am not sure if they will do what I need
View 3 Replies View RelatedFile sync doesn't not appear to be working and my logs are filled with this error:
"Connection to the other side was lost in a non-clean fashion."
The sync daemon after awhile will take up 1.3gb of memory and will peg one of the processors.
I also get connection errors for the control panel app.
I'm on Ubuntu 11.04 64bit.
I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
I've discovered Firefox Sync a while ago, and it's absolutely awesome. Now of course I'd like most of my software to work this way! So is there a way to get the same behavior with Thunderbird?
View 1 Replies View RelatedBeen thinking about a new backup-strategy for my family and me. In our house is an Ubuntu Server (10.10) and NAS (Zyxel NSA210). Now I thought I'd create a Cron Tab entry on all machines which will sync specific folders automatically to either the NAS or a specific backup drive in the server. So now the question is: "How do I do that without seriously compromising each family members privacy by making their backed up files available to everyone in the house?" So in essence I'd like to sync/back up the files to a password protected share for each family member. But this process should still be done automatically every few minutes or so without them having to enter any password at all as their specific password is stored locally.
View 1 Replies View RelatedAs per the documentation of sync [URL] , it schedules the writes but does not necessarily complete the write upon return.
Is there any other way to make sure we sync and it returns after it has written all the buffers to disk?
I have a few servers that are exposed to the internet. When someone tried to brute force hack in to the ssh, ossec adds their IP to the hosts.deny. Then the hacker (read: script kiddie) moves to the next IP up the line and hits my next server, etc, etc.
I end up getting 20 emails for all the servers that they hit.
My question, is there anyway to sync the hosts.deny file across multiple servers so that if they are locked out of one, they are locked out of all?
My music files are all on an external HDD I'd like to back up onto a couple of different computers. how to keep them syncronized?
View 6 Replies View RelatedIt seems that selinux has stop weav to sync the bookmarks.I followed the fix code as SELinux suggested,but it can't work.Does anyone know how to solve it?
View 3 Replies View RelatedI'm having a bit of an issue using overloaded operators in an already overloaded operator. In my following code, I have overloaded the && operator to compare two Course objects. The operator in turn goes to a function which calls other overloaded operators to compare private object variables of that object to compare them.
View 8 Replies View RelatedApache is overloading the server executing as the user nobody.
Below I give the output of top -c
Code:
What might be the possible reason for overloading. I can give more visibility to this if required.
able to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies View Relatediam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies View Related