Ubuntu :: None Of Sound Devices Work With Skype Anymore?
Jan 24, 2010
I use Kubuntu 9.10 on my desktop and UNR 9.10 on my netbook... both worked just fine before(with every version of Ubuntu since 8.04), but I didn't use them for a little while with 9.10 and nothing from either of them... Logitech USB headset and the IPV Free2 USB phone.... granted I couldn't use all the features with the Free2 phone before but I could still use it to talk with skype. When I go to sound devices in skype, they are both recognized by the system... but just will not work no matter what.
View 3 Replies
ADVERTISEMENT
May 22, 2010
I just installed skype 2.1 beta 2 (the deb file) from the skype website, but the only option I see under Sound Devices -> Recording is "PulseAudio Server (local)" This doesn't work for me, as the skype test calls don't actually record anything I say. I use skype a lot and FINALLY got it working under karmic, but I needed to upgrade to lucid and now it's broken.
When I open Sound preferences and look at the Applications section, Skype shows up as recording when I run its test call... but no sound is recorded? How is it possible that my sound card picks up something recording but doesn't actually record it when I'm in skype?
View 9 Replies
View Related
Nov 21, 2010
You really have to love this fantastic Ubuntu system which destroys your setup and programmes with an update.
It seems as though one of the updates made a mess of Skype this time. well done.
Ok so here is what's happening.
First i have to say that to get my sound card working i needed to upgrade ALSA. Everyhting was running fine until....NOW.
I haven't used Skype in a while but now i thought lets use it a bit. I start up Skype there is sound. but then suddenly sound is gone. video is just fine. sound is gone completelly from Skype. mic doesn't work and neither do spekers, eventhough upon launch everything works. i can't even do a test call. in fact i could do it once but the sound was messy.
also the skype seems to have crashed as i can't exit it at all. it's just keeps running as process.
anyone had something similar? any solutions? i would post this on Skype forums, but since Skype worked before and now it doesn't anymore i believe it is Ubuntu issue.
I am running Ubutnu 10.04.
View 2 Replies
View Related
Mar 5, 2011
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Nov 30, 2010
after installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option
View 3 Replies
View Related
Apr 11, 2013
I'm running on Debian Testing, and I just distro-upgraded from Squeeze just a month ago. When I did, I had some strange sound and video problems. For the sake of this topic I'm just talking about the sound ones. Back then, my sound would only work as root, otherwise without any visible errors, I would play sound files and no audio would come out. I'm aware that this usually means that my user is not a member of the 'audio' group, but I did and Ihave confirmed it and all of my users are. Then, suddenly my sound inexplicably started working again, so I took it as it was. However two hours ago it disappeared again. The important information here is that nothing I did as a user could have effected it. All I did was let a video file buffer, write a text file to my documents, and send an email.
According to Alsamixer my sound card is HDA Intel & my chip is SigmaTel STAC9200. When I upgraded to Wheezy, the terminal told me that I would need to install proprietary drivers to get my sound (and especially) video working, however every tutorial I've found on how to do this seems to dead-end for my computer on the current testing branch of Debian.
View 10 Replies
View Related
Dec 24, 2010
I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf andOutput of lspci for the audio device:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Giga-byte Technology Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
[code]....
View 1 Replies
View Related
Mar 1, 2010
I am working for Fedora 12 installed on my laptop, and skype has worked. I was able to speak, able to listen and everything (besides some installation problems) was working fine.
Then I allowed Fedora to update(or bugfix or enhacement) some items of my system.
Now when I click on the loudspeaker symbol in the panel and open the mixer I see various tabe for sound input and output. Finally a good idea, and I even have a slide for skype!
But it does not work, I don't hear anything from skype (version 2.1.0.47).
I am able to record and playback via arecord/aplay, so in principal it should work. Any ideas what is wrong? Maybe a bug in a bugfix?
Some more informations for the pros:
View 1 Replies
View Related
May 1, 2010
I just freshly installed 10.04 and I found that the sound doesn't work with Firefox and with Skype2.1.0.81 (though I get perfect output in Amarok and I can record from the mic just fine using QARecord). I have an Intel ALC880 integrated card and neither issue was present in 9.10.
View 8 Replies
View Related
Jun 18, 2010
I have recently upgraded to 10.04 and try as i will I cannot get Skype to work. Sound is very patchy and hence unintelligable. Worked fine in 8.04 usung alsa.
View 1 Replies
View Related
Jan 19, 2011
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as:
Vendor: Creative Labs
Model: CA0106 SoundBlaster
Module: snd-ca0106
I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
View 2 Replies
View Related
Nov 20, 2009
I basically can't get my mic to work in F12. After several releases fighting with pulseaudio, F11 finally worked almost OBO, after going to system->preferences->advanced sound configuration and setting all the input volumes to the maximum. But now there's no advanced sound configuration tool, and I just can't find anything to make it work. Skype isn't working, nor is gnome-sound-recorder. I do record some static, but nothing more. By the way, I'm on an Acer Timeline 3810T.
View 14 Replies
View Related
Feb 26, 2010
i am having a problem with skype that i wasn't having before, and afaik skype hasn't been upgraded recently, so something else presumably has changed.
because of driver issues i have to use an external usb audio interface to do voip. this interface is not connected to the pulseaudio server. i am able to connect it to jackd and it works fine for both audio in and out. however it no longer shows up in the list of sound devices available to skype. this used not to be the case. i have tried stopping and restarting skype, as well as unplugging and reattaching the interface. the interface does not show up in pulseaudio manager in the lists of devices.
View 9 Replies
View Related
Jan 11, 2011
get Skype to work on 64 bit have downloaded and installed the 32 bit which installed fine but just wont load
View 2 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
May 14, 2010
Due to the fact that with pulseaudio it is impossible to change the microphone/speaker/ring devices in skype, I had to remove pulseaudio.
After that I can choose a device in skype, but the mixer does not work anymore. There is a way to have a working mixer without pulseaudio package or a way to choose audio devices in skype with pulseaudio installed?!
View 1 Replies
View Related
Dec 15, 2010
I have downloaded & installed the skype beta release for linux (now ancient?) on my newly build fedora 14 (64) box.
Under fedora 12, I made this work after several hours of mucking around by installing old libraries for 32 bit code in /lib and /usr/lib - as I got an error, I found the library and put it in place. This was painful and the WRONG way to do things - I should have been using yum!
It remains a shame that the Skype release for Linux is so old, but that is life.
Can anyone list the libraries needed (prefer yum names if possible) to make this work?
I can do this again the hard way and list the results for others (should have saved for myself, but I never dreamed that a newer Skype release would take so long) , but I am sure many folks have this working already. I am surprised there is no "yum install skype---" command.
View 14 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Oct 1, 2009
after a couple of updates... my sound is not working anymore
HTML Code:
alsamixer -c0
volume:ok
HTML Code:
killall pulseaudio
pulseaudio --start
didn't fix the problem (user member of pulse-rt)
View 5 Replies
View Related
Feb 15, 2010
I was having problems with pulseaudio, which I eventually cleared up. Now sound works on everything except flash videos and games. I have tried to reinstall adobe-flashplugin in synaptic, but I get this:
E: adobe-flashplugin: subprocess installed pre-removal script returned error exit status 2
When I try to remove Adobe Flash Plugin 10 in Ubuntu Software Center, I get this:
installArchives() failed: (Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
[Code].....
I primarily use Opera, but flash videos do not work in either Opera or Firefox.
View 3 Replies
View Related
Aug 5, 2010
Earlier I was in windows to do school that I had to do in windows. I shut my monitor to suspend my computer, which disables my sound card. Later on I went back into ubuntu and forgot about it. Ubuntu had updates to the system and since then I have not been able to get my sound to work.
View 2 Replies
View Related
Jan 6, 2011
I just attempted to purge and reinstall ALSA (and all of it's related packages/utils) after disabling the on-board sound in an effort to use only an M-Audio Delta 1010 as the sole sound device. I've also tried to reinstall Envy24, as well as drivers for the ICE1712 chip... Now,I have no sound devices. alsamixer tells me there is such file or directory. When I go to /proc there isn't even an asoundrc file there.
I don't know what to do. I've spent the last 4 hours looking for a fix, and trying all sorts of things, even the comprehensive sound troubleshooting guide on this forum. Nothing. I got absolutely nothing. Everything goes exactly as the guide states, except after rebooting, and trying aplay -l and alsamixer, it says there's nothing installed?I have to have a sound, this machine is a DAW .End result I'm looking for is to use the Delta 1010 as the ONLY sound device.
View 4 Replies
View Related
Jul 17, 2010
I'm having some real troubles with my install of Ubuntu 10.04 LTS. It was a fresh install just after 10.04 was released, so it's not been installed long. Just recently lots of things have stopped working I can't sudo (sudo: must be setuid root) Trying to su root tells me I got the password wrong, even though I know it's right Sound has broken Brasero won't write CDs anymore Plugging in a pendrive gives some permissions mounting error Clicking 'shut down' just logs out. The machine won't shut down at all. I'm guessing this might all be related to permissions/users? I really don't want to have to reinstall again!
View 1 Replies
View Related
Feb 25, 2010
Up until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying:
The audio playback device NVidia (ALC883) does not work.
Falling back to.
If I turn the computer off and then back on, sound is working again. code...
View 1 Replies
View Related
Apr 26, 2010
I'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.
After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.
I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.
So, how can I disable USB at the moment I go into standby?
View 1 Replies
View Related
May 2, 2010
I can't get my SAT card to work anymore for I'm installed 10.04.It worked fine under 9.10.Any idea how I can debug or solve the issue.
View 4 Replies
View Related
May 8, 2010
i am currently using an acer aspire one netbook and i saw the port on the side for a moniter. so i figured 'why not?'. i discovered why not. i restarted my system and the screen is all wierd i think if i can restore the default settings i'll be fine... i managed to log in but i can't see what i'm doing... i am running the most current stable release of ubuntu.
View 9 Replies
View Related
Jun 22, 2010
If i use my Ubuntu some times per week, there isn't any problem. But if i don't use it for a short time (a week), when i want use it again and select it on GRUB.. after the first loading screen (on Ubuntu 10.04 the purple screen with Ubuntu in white and some points under), my screen is black. The computer screen is receiving signal because the led is green and not brown/orange like when is on standby mode. On Windows i haven't any problem.
First time it happened with Ubuntu 9.10. I didn't got solution for it and i format the partition and install the 10.04. But now it happen again with 10.04. I have an ATI 5770 and i have tried drivers since 9.12 till 10.4 (last ones the best i have had) On versions before 9.10 i had no problem, but i can't confirm that, because i had other graphic card (NVIDIA 9800GT). But the 5770 didn't work well on previous version so i updated to 9.10 and after this problem, updated to 10.04.
At spanish forum, people don't know solution for this problem, they never read about a similar problem. I hope you know a solution for it, because the only one i found and work is.. format and reinstall.
View 3 Replies
View Related
