Ubuntu 10.01 / Gnome / I assume pulseaudio Seems my sound works fine except when I mouse over a file there's no sound. Seems there's some activity involved, even a music note emblem pops up, but again, no sound. I've got gmusicbrowser installed if that means anything.
View 2 RepliesI'm running Lucid 10.04, kernel 2.6.32-26, 64-bit, Intel 3400 series chipset. Whenever I run Hedgewars and The Mana World, the volume fluctuates really fast, and the sound applet flashes. Then the mouse pointer freezes up for a second, then moves really slowly. Once I quit the game, everything returns to normal. I've tried disabling desktop effects, changing game settings,
View 1 Replies View RelatedI have the strange problem that my sound and video stops sometimes when I'm not moving the mouse. As long as I keep moving the mouse there is no problem.
I am using
- Fedora 14
- 2 Sound cards (Internal Audio and Audio device on my Radeon HD 3600 video card, however this sound is not working)
What happens is that the sound will disappear, either without any apparent reason, otherwise when I move the mouse, or pause vlc, or open up another application, in most cases FF. I have also seen the mouse flash while vlc is in fullscreen, and immediately afterward the sound is gone. When the sound disappears, the gnome-volume-control will disappear and reappear on the top taskbar. Also there will be no device under the hardware and input tab of the sound preferences when the sound disappears.
Killing and restarting the pulseaudio daemon from the cli will return the appropriate choices under sound preferences hardware/input tabs, as well as the audio. This could happen a couple of times in the period of an hour. Usually restarting vlc will solve the problem, or restarting the pulseaudio daemon. Another thing I have noticed is that I will occassionally have to kill the vlc process through the system monitor or cli, as closing vlc will not remove it from the taskbar. I have tried the fix shown here, to no avail. Using kernel 2.6.30.9-96.fc11.x86_64 on a hp dv3-2154ca.
[code]...
Something wrong happened with my sound applet. It regulates my sound volume on each mouse wheel scrolling, even if applet is not active. What's the reason for this? Recently I didn't make any changes in systems configuration. Tried to create an empty user folder and login there - problem still exists, so it is not a wrong configuration in users folder... what could it be?
View 2 Replies View RelatedI just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
View 11 Replies View RelatedWhat is the mouse API to detect mouse buttons status? Or Is there any command to detect the mouse button status?
View 2 Replies View RelatedI have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED.
.....
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
[code]....
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies View RelatedI just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
View 1 Replies View RelatedBiggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
View 1 Replies View RelatedCNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20.
The only avalible resolution is 1600x900.
/etc/debian_version 8.1
GNOME Terminal 3.14.1
xnee 3.19
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
Iv'e got an issue with mouse speed, on boot the mouse is to fast, so I found that the command
Quote:
slows it down the way I need. But now, each boot I need to run it again. Is there a place where I can put it so it runs every time X starts? Also, googling a bit I found that udev rules can be used instead, but I don't know how to write it as a rule.
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedIs there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies View RelatedI had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?
View 1 Replies View Relatedjust want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs:
Intel Core 2 Quad Q6600 @ 2.40GHz
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400)
Western Digital 250 GB Hard Drive
Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22)
(Used Desktop Install CD)
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.