Ubuntu Networking :: Finding A Software Which Search+test Proxies
Feb 15, 2010There's such thing for Ubuntu too?A software which search+test proxies... that's all I do need
View 1 RepliesThere's such thing for Ubuntu too?A software which search+test proxies... that's all I do need
View 1 RepliesI am trying to istall litb for P2020DS. I got an error the following error:
[hwtesting@HWLSRV1 ~]$ cd /home/hwtesting/ltib-p2020ds-20091119
[hwtesting@HWLSRV1 ltib-p2020ds-20091119]$ ./ltib
Don't have HTTP::Request:ommon
Don't have LWP::UserAgent
Cannot test proxies, or remote file availability without both
HTTP::Request:ommon and LWP::UserAgent
add folowwing line to User Privilage section:
hwtesting ALL = NOPASSWD: /bin/rpm, /opt/freescale/ltib/usr/bin/rpmvisudo
I edit the sudoers by visudo command and insert this line just under the following line:
root ALL = (ALL) All
But still I am getting the following:
Don't have HTTP::Request:ommon
Don't have LWP::UserAgent
Cannot test proxies, or remote file availability without both
HTTP::Request:ommon and LWP::UserAgent
Recently My ISP provider blocked any kind of http proxies can be used in browsers. When I put my proxy settings in my browser, it keeps loading with no response. I've squid proxy running on my own server and worked fine before that modification.
View 3 Replies View RelatedIs it possible to define multiple proxies in NM and switch between them?
View 1 Replies View RelatedI'm looking for a Linux program that will do some simple network performance/stress testing.
View 3 Replies View RelatedI am using NetworkManager Applet in Gnome to connect to the internet with a 3G modem. After last update few days back it changed the way it was recognizing the modem. I used to click on the NetworkManager Applet icon on the notification area and choose my configured mobile connection from the list. Because, as I said, I am using mobile broadband connection and I have to check via SMS my usage in order not to overcome the GB I am supposed to use (to avoid overpriced charge). In order to use Wammu to send/receive SMS I have to close the internet connection by right clicking on the NetworkManager Applet and uncheck "Enable Mobile Broadband" otherwise Wammu can't use the usb dongle because it's locked by the internet connection. Up to this point all is working exactly the same. Except when I uncheck the "Enable Mobile Broadband" the NetworkManager Applet disappears and I can only get it back with a reboot. Also I tried clicking on the applet and choosing "Disconnect" from the menu. The applet stays there but there are no more options for mobile connection. Only wired connections and VPN (whatever that is). In this case if I disconnect and reconnect the usb dongle it recognise it again. So my question is: Is there a way to make NetworkManager Applet to always stay aware of the usb modem without disconnecting or rebooting? Or at least is there a command that can search for new usb hardware without the described procedure?
View 6 Replies View RelatedI have recently installed chromium in my ubuntu 10.04.
I am facing a problem. Chromium always takes the system proxy settings, and if I change the settings for chromium then system settings change too..
I want to use different proxies in the two places.
What if someone tampered with some important security updates, and suddenly you get a rootkit instead?
View 4 Replies View RelatedI have a back-end server behind a proxy machine. I would like non-SSL requests to the proxy to be rewritten into HTTPS requests to the back-end server, while not screwing up URLs with missing or misplaced trailing URL slashes. So far, on the proxy side, I have this in a virtual host for port 80:
Code:
ReWriteEngine On
# trailing slash fix:
RewriteCond %{SERVER_NAME} my.proxy.com$ [NC]
RewriteCond %{REQUEST_FILENAME} -d
[Code]...
But adding anything else to the URL fails, as the back-end server name gets stuck into the proxied [URL]... The rewrite log seems okay, I think. So I guess this is failing at the reverse proxy rule? Where am I going wrong?
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies View Relatedi guess this is an installation issue as i am newish to Linux and got a F14 laptop from a used/refurb store... Anyway it seem i have difficulty with getting GTK running or maybe it is WGET...?
i did manage to install apt-get and was able to run synaptics ... but now whenever i try to run synaptics it flashes the interface and crashes. i tried apt-get search wget and it says invalid operation search. i tried apt cache wget and get a crash box in the upper right corner... i tried apt-get gtk+extra-2.1.2-4.fc14 and it says invalid operation gtk...
All of which is frustrating my attempts to get the GTK interface to J working. Their script uses WGET which i also cannot get.
All of a sudden lost the Internet connection on Ubuntu10.04
$ ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.088 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.067 ms
[code]....
I have a 10.04 install with 2 network cards. wlan0, and eth0. wlan0 is the internet connection. eth0 is the local network. I want to be able to have internet connection sharing between eth0 and wlan0. I have set everything up, using firestarter.
is there a way of testing the eth0->wlan0 routing from the machine itself? The routing table looks sound, but I would like a quick way of confirming it. Is there a tool, like PING or TRACEROUTE which will let me say "ping [URL] going through eth0" ?
I want to test whether or not my phone is connected from bash. I'm finding lots of information about /dev/rfcomm0, but that's not on my system (Ubuntu 10.04). The device pairs just fine, and I can connect with gammu just fine, and I have the device address ("00:1F:5D:37:17:FB").I just need something I can put in a bash script to say "Is this connected or not" akin to testing for a file's existence:
Code:
if [ -f /home/steven/arbitrary filename ]
then
[code]....
I have pc with two NIC's (eht0 and eth1). I want to test throughput switch/router.I can ping on both interfaces.Connection Diagram:
eth0 -> Patchcord -> testing devices -> Patchcord -> eth1
I run two iperf:
-s -B 192.168.1.10 (eth0)
-c 192.168.1.20 -B 192.168.1.20 (eth1)
Results:
[ 3] 0.0-10.0 sec 4.45 GBytes 3.82 Gbits/sec
The test results are false because I use 100Mb/s NIC's. I can't use two pc's for test.I tried to do the same test under windows 7 x64 it and works properly, but under windows xp there occurs the same problem like under ubuntu.
I'm using a remote dedicated server running ubuntu server edition, and I have no idea what the upload/download speeds are.Is there a reliable method to test these speeds via the command line?
View 2 Replies View RelatedI've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
I do not know much at all when it comes to setting up hardware--servers, switches, etc.
I have a 1701HG 2Wire wireless router that I use for my home network. I have an old pentium 3 tower that is just laying around, and I want to be able to host my projects on it for testing. Basically, I just want to be able to do everything on my laptop and then upload it to the server for testing.
I have set up an Ubuntu LAMP server on the desktop and am able to do everything I want via SFTP; however, I want to be able to type in "projectx.local" in a browser on my laptop to go to one test site, "projectz.local" to go to another, etc.
Is this possible, since I do not have the server set up as my gateway? It is merely connected to the router like everything else.
Set up a server with Bind, Dovecote, Apache etc. Registered a domain and made all the necessary things for it to work. The server can send/receive mail on my domain, but when I try to look up the site I have it returns a lookup failure. I know Apache is working as I can browse the site when I used my ip address but I can't when I use the domain name. Anyone got a few tricks I could try to dumb down and find the possible failures I did when setting this up?
View 7 Replies View RelatedI'm trying to identify when WAN bandwidth is compromisedI don't want to run this continuously, but would like something that I can put in a script for testing purposes. All the speed tests I've foundhile quite adequate otherwise, utilize a GUI interface.Similarly, is there a linux-based client / server pair that I can use to test out LAN /VLAN issues?
View 13 Replies View RelatedJust want to know if my connection will be good for voip like skype...
View 1 Replies View RelatedI would like to be able to test that a network mounted cifs(samba) share is actually mounted in a script file to do backups. I want to do this so that when my automatic backups run they actually go to the remote location or fail. Currently, if there is a network problem that prevents the network share from mounting, the files simply get copied to the folder (e.g. /media/backupmount) and end up filling up my small local hard drive.
View 3 Replies View RelatedBeen helping a user who recently upgraded to 11.04 as his networking stopped after the upgrade. One thing I noticed was that he could not get ping to work.Then checked my 11.04 machine and it also fails to ping using Network Tools. I know the network is OK as I am using my Ubuntu machine to write this. Ping from the command line is fine so it is only the Network Tools ping test that appears to be broken.
Asked another Ubuntu 11 user to check his machine and he also cannot get ping to work even though his machine appears to be fine. Again this is only using the GUI tool.I know it is not hardware as I can dual boot and in XP everything is fine and I can ping all my systems. Also I am sharing a folder from my Ubuntu and my Mac shares the folder just fine. The Mac can also ping everything except the Ubuntu box. Command line ping works so it is not a basic network problem.So as far as I can tell the Network Tools ping test is not working. Has anyone else seen this or can confirm that it is broke. How do I report this or get it fixed?
DELL Inspiron 1501 Broadcom BCM4311 is the wifi adapter.The problem I am having is that I cannot get to search for wifi networks. It looks like the driver and everything is there but the wifi is disabled for some reason.I installed the drivers provided by the "Additional Drivers" application and they do not work.I also followed this fix and I could see in the menu that the wifi was added but I was not able to click it or look for wifi's URL...
View 9 Replies View RelatedMy current setup is a slack based distro with Squid 3.0 running in transparent mode with WCCP. Web filtering and AV scanning works great but we need to go a step further and introduce port filtering into the setup. I can easily accomplish this with iptable entries but only if I point to the proxy directly; the goal is to do this completely by interception. So far I've had no luck doing this with iptable entries or with squid ACL's and I am wondering if there's something that I am missing or just not doing correctly. So far during testing I've just been testing with common IM chat ports such as MSN and Yahoo. I am currently trying to setup a test lab with squid and 2 NICs with one NIC connected directly to the internet but this is not a route I would like to go.
View 1 Replies View RelatedI am having trouble adding additional search domains to ubuntu. I can add them to resolve.conf, but networkmanager will keep overwriting it. Is there somewhere else I can add the search domains?
View 9 Replies View RelatedI succeeded in setting up a vnc server on a fedpra9 tested it locally and it was successfully connected but no connection done from other machine in the network , even though they can see each othervnc server is pingable se linux is disabled
View 9 Replies View RelatedI'm working on testing some software, and I have a question. We have several files of binary data that we need to push through our application to test. It communicates via simple TCP sockets. Is there a way I can send this data to the socket from the command line? I tried doing something like this, but telnet never picked up the data.
View 5 Replies View Related