Since i have 10.10 desktop i386 on my asus 901 im able connecting over bluetoth to my sony ericsson fone and get internet working! but i mmust everytime connecting doing the autorisation with the bluetooth device everytime conecting i must write for example 1 on both devices - laptop and handy,it must be on the linux software how can i turn off this issue!
View 3 RepliesI'm using Ubuntu 11.04 and bluetooth turn/off is not possible. However, with 2.6.37 kernel it is possible. Now i have gathered whole info about the device(mac adress, usb port etc) from 2.6.37 and what i need is to somehow use those info in kernel 2.6.38 so that bluetooth works.
lsusb in 2.6.37 (while bt is on)
Code:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 1241:1603 Belkin Keyboard
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 09da:8090 A4 Tech Co., Ltd
[Code]....
I have a nifty new headset (a JawBone icon�the noise cancellation is incredible) and I've successfully connected it to my Karmic laptop (64 bit, for the off chance it makes a difference). The trouble is, I only occasionally want to connect it to my laptop; I mostly use it with my mobile 'phone.
The two devices fight over my new toy a lot, and invariably the laptop wins, contrary to what I want. It seems a pain to have to rediscover the headset every time I want to use VIOP or whatever, so is there a way to add a device to Karmic's Bluetooth list, but not have it connect whenever it sees it?
I have two BT USB adapters on my fedora9 (2.6.27.19-78.2.30.fc9.x86_64).How i can tell which of them to bind as /dev/rfcomm0 device.It seems that rfcomm.conf doesn't say me too much about.
View 3 Replies View RelatedConnecting Palm 72 to internet Via Bluetooth.
PALM: *Connect* Initializing... Error: Serial: timeout. Could be bad cable or faulty modem. So I do on PC:
[Code]...
I have a simple Bluetooth device I would like to pair with my computer. I detect it in the BlueTooth New Device Setup (from the GNOME pannel), detected as "Unknown", I enter its pairing code (1234) and click on "forward". But then it asks me to enter a code on the BlueTooth device... I don't have anything to enter any code on this device. I would like to simply connect to it! From other OS, I manage to connect to the device as it's not asking to write any pair code in the bluetooth device. The PIN code 1234 is enough to make the connection.
View 3 Replies View RelatedI have some problem while connecting mobile phone to fedora through Bluetooth.
View 2 Replies View RelatedI have HP mininote 2133 with Suse SLED 10. I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer. What should I do to connect?
View 3 Replies View RelatedI have bluetoothd,hidd,and bluez-simple-agent running. I can manually connect my if I use
Code:
"hidd --connect XX:XX:XX:XX:XX:XX"
However, I cannot get bluetoothd to make any sort of connection automatically. I have hidd running as a server, I see link_key_request(sba=XXXXX,dba=XXXXX) in dmesg when I click the mouse, but I get no connection.
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code:
Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?
I tried on console
Code:
$rfcomm listen 0
but it's stuck at
Code:
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
I have HP mininote 2133 with Suse SLED 10.I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer
View 1 Replies View Relatedtoday I installed Opensuse 11.3 on my new laptop, a Samsung R540. Initially I got my Logitech bluetooth mouse working because I hate the touch pad, then I got the wireless network working by upgrading the kernel with the broadcom-wl package at which point the Logitech bluetooth mouse stopped working. I am able to detect the mouse when I go to add new devices using the gnome-bluetooth applet but it times out when it tries to connect.
View 2 Replies View RelatedWhen i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code:
Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....
How do I tell what comport a Bluetooth device is connected to? The software that i'm using needs to know what comport to connect to.
View 2 Replies View RelatedIs it possible somehow to block some bluetooth device with specif address (mac) ?
(like iptables block by mac)?
I've been having trouble in a couple of distros (including when I had windows installed..) getting my bluetooth working,
I have a dell vostro 1720, and the specs from dell insist there's a bluetooth adapter installed, and the laptop even has a little light which (ostensibly) indicates data being transmitted via bt... and, it's enabled in the bios.
though, dmesg | grep bluetooth
gives no results.
I've read comments on dell bluetooth for other dists, but can't seem to find any deb-specific recommendations.
So, how do i confirm that this laptop does *in deed* have a bluetooth adapter.. and... if there is one... how do let the kernel know about it?
I'm struggling for pairing my laptop with my phone to dial up internet. On slack 13 I configured hcid.conf but on the new 13.1 with the new demon bluetoothd I don't know how to pair on command line.Documentation is not a lot, or I'm not able to find it.
View 7 Replies View RelatedI'm using CentOS 5.4 x86_64 on my Dell Inspiron 1440 laptop. How can I configure my bluetooth device through CentOS?
View 5 Replies View RelatedI have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
I've a custom startup script myscript.sh placed inside /etc/init.d/ directory with below lines to disable usb bluetooth device "hci0". This happens on Ubuntu Lucid.
Code:
#!/bin/bash
echo "Disabling hci0 bluetooth usb dongle"
/usr/sbin/hciconfig hci0 down &
Here is the /var/log/daemon.log
When I rebooted it worked fine disabling the bluetooth dongle. But, later on, it gets enabled! I've lost it!
Code:
May 15 00:20:02 linbox bluetoothd[1539]: probe failed with driver input-headset for device /org/bluez/1537/hci0/dev_00_1F_DE_FE_7C_34
May 15 00:20:02 linbox bluetoothd[1539]: Adapter /org/bluez/1537/hci0 has been enabled
May 15 01:07:39 linbox bluetoothd[810]: probe failed with driver input-headset for device /org/bluez/752/hci0/dev_00_1F_DE_FE_7C_34
May 15 01:07:39 linbox bluetoothd[810]: Adapter /org/bluez/752/hci0 has been enabled
May 15 01:07:49 linbox bluetoothd[810]: Adapter /org/bluez/752/hci0 has been disabled
May 15 07:46:10 linbox bluetoothd[1452]: probe failed with driver input-headset for device /org/bluez/1450/hci0/dev_00_1F_DE_FE_7C_34
May 15 07:46:10 linbox bluetoothd[1452]: Adapter /org/bluez/1450/hci0 has been enabled
I used update-rc.d myscript S 26 2 3 4 5 . to update symlinks.
i just installed debian wheezy on msi cx640dx. my bluetooth device not working. here is some information about kernel and modules.
kenel version:
Code: Select all$uname -r
3.2.0-4-amd64
--------------------------------------------------
lspci
Code: Select all$lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
[Code]....
I have laptop with bluetooth and I bought PS3 bluetooth remote. In windows this remote is working with EventGhost and I would like to use it in Fedora as well. This remote has to be paired without a pin code, which is how I paired it in windows.In Fedora, however, there is no such option "no pin" when using a standard way to connect bluetooth device.How can I pair this remote in Fedora?
View 11 Replies View RelatedI use fedora12-Gnome as my major desktop OS. Every basic need was fulfilled , until I tried Fedora12 KDE. The problem is with Bluetooth connectivity to my cell phone device.It connects to the cell phone and set trusted but I can't seem to see any option of "Browse files on Device".Does that mean in KDE I actually can not browse my Bluetooth connected devices?The same thing happened with Mandriva2010-Kde and Fedora13 Kde , I mean I guess It's related to KBluetooth app.
View 2 Replies View Relatedhow can i search bluetooth device in linux(redhat) without graphics
View 1 Replies View Relatedi have created dialup internet connection in windows xp using my bluetooth enabled mobile and bluetooth device ,,and my question is that how to set up the same procedure in my fedora 11 system.
View 1 Replies View RelatedI am developing an application which communicates with a bluetooth device.I do not want the user to pair or unpair the device using the Bluetooth applet or command line, but I want to automate the pairing process through my application. The application will scan and find the bluetooth devices in the proximity of the computer, and automatically pair the required device without any user input.Where should I look for the relevant APIs?
View 1 Replies View RelatedI just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedAfter a lot of messing around and research, I figured out how to actually get my bluetooth headphones to connect and stay connected. Although once I shut them off, remove the device and re-add it using Blueman.
Right now, `pavucontrol` shows "Headphones (unplugged)" and there is no sound coming out of the speakers. But there is no sound coming out of the headphones either. They are set to the fallback. I've opened `alsamixer` and made sure everything was turned up. Still, no sound.
Since `bt-audio` isn't on Jessie, I don't know what I should do. It seems like this may be the missing step but I am unsure.
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies View Related