I've been searching all around information, how can I enable wifi, bluetooth and lan on this laptop. However, nothing works for me... rfkill unblock all command doesn't work.
how to do it in short time that would be just great, because I offered to my friend to repair her computer and install 'better' working Linux, but so far I even cannot enable wireless.
i am trying to get my wireless card for a sony vaio vpcee23fx to work, i cant seem to find the driver anywhere.
View 2 Replies View RelatedI have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
My wireless connects and then in a few seconds disconnects and then again connects..... and so on.
And even it seems to be connected I cannot reach any website. Could you please help me?
Below there are some information probably needed
1 ) Machine Brand and Model (PC/Laptop): Sony vaio VPCM13M1E (Netbook)
2 ) Wireless Brand, Model and Wireless Chipset: (I believe it should be one of these)01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe 02:00.5 Ethernet controller: JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller (rev 02)
3 ) check interface:
a) ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 90:fb:a6:fe:ce:3d
[Code]...
Wireless which was working perfectly in Ubuntu 10 is now disabled in 11.04. Dual boot to Vista verified the hardware is ok.
Reading related posts I applied the following:
sudo lshw -C network
Quote:
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
rfkill list all
Quote:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
sudo lshw -C network
[Code].....
But nothing at the IP level. Also, after a few minutes in which my laptop went to screensaver and locked up the wireless was disabled again.
I installed Ubuntu 10.04 on my new Sony Vaio series S but it does not recognize my wireless card (I think). The button is on, but the light does not turn on, and it does not detect the wireless card. The wireless card, an Intel Centrino Advanced -n 6205, does work in ubuntu and when I run the command: lshw -C network, it appears UNCLAIMED, that I think it means the drivers are not in the Ubuntu libraries. What can I do to make it work? I've been struggling but I cannot make it work.
View 9 Replies View RelatedI am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
I upgraded the wireless card in my laptop (sony VAIO CW) due to the original Atheros being incurably slow.The new card is an Intel 6300 ultimate n. In Windows 7, after installing the relevant drivers everything worked without a hitch.In my Ubuntu 10.04 installation, however, I have been unable to get it working.Initially I had the compat-wireless modules installed (linux-backports-modules-wireless-generic), as I had done so to try and get the Atheros card working better. I tried removing all of these, and that made the difference that iwconfig now (instead of nothing) listed
Code:
wlan1 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm
[code]....
I'm having a hard time fixing the sound on my Sony Vaio Vaio VPCEE25FX/WI. Headphones work for some reason, but speaker doesn't.
View 1 Replies View RelatedI used to have an Ubuntu-Windows partition, but (what do you know?) Windows Crashed, and wouldn't boot anymore. So I reinstalled Windows, deleting my Ubuntu partition. Instead of reinstalling Ubuntu afterwards, I decided to give Debian a try. So here I am. I can't find drivers for my wireless network however, and it's quite annoying to have to plug in the Wired Connection with which I am writing this.
My main specs are:
Sony Vaio VGN-CS390J
Debian 5.04
AMd64
I have a Vaio M13 M1E, and I'm trying the Linux Mint 10 (Julia) DVD, via a bootable USB stick created Universal USB Installer, but the wireless isn't working.On the other hand, trying Ubuntu 10.10 Netbook it works fine - given that Mint is a variant of Ubuntu, I'd have expected it to work the same.I've tried searching, but not found anything relevant, so anyone have suggestions on what to try?
View 1 Replies View RelatedI'm currently installing Slackware 13.1 on my old Sony VAIO. It's got a wireless card sticking out the side of it, and I just want to make sure I set it all up correctly. I got to the screen where it's asking:
static IP
DHCP
loopback
And I'm not sure which one to pick.
I've happily finished a SWE course that required VS2010, and thus a new computer to run the hog. Now that the course is done, I'm installing Ubuntu. As the post title implies, the live CD works well and the install goes fine. I'm able to boot up in Ubuntu and do an update. After that, though, Ubuntu freezes on boot. It gets as far as the moving dots but freezes right after that.
View 2 Replies View RelatedI'm having trouble with 802.11n as of late in Ubuntu. I know my wife's computer used to connect faster but it seems to not be able to go over 54 Mbit in 10.10 any more either. Laptop is a stock Sony Vaio VPCZ12CGX/x which has an Intel Advanced-N 6200 card.
LSPCI output: 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
I can connect to the 2.4Ghz channel or the 5Ghz channel on my wap both are capable of up to 300Mps as per its configuration but neither go over 54Mbit. Both do about 160Mbit from this same location in Windows. Moving closer makes no difference.
I can't see internal Mobile Broadband in Sony VAIO VGN-Z11WN. Prior to update I could use it.
View 2 Replies View RelatedIntel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
/etc/init.d/wicd start
/etc/init.d/networking start
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
I cannot use my motion eye webcam, here's the result of
Code:
lsusb
Code:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870]
i cannot use cheese, is there anyone know how to fix this problem?
I've been trying to install Ubuntu 64bit on Sony Vaio CW and the Screen is 14 inch when I boot from CD it seems to work normal but after i select "Try Ubuntu without installing" or "Install Ubuntu" then the screen goes black like nothing happening but the CD runs for while then stop. Again I reboot to try again this time I press F6 then select "nomodeset" and it boots fine I was happy though, after installation success when I boot again WTF it goes black again and then I reboot and press "E" during the options that showing to select OS then I remove "Quit Splash".
I guess then I add "nomodeset" and control+X to boot, it works fine. So when I log in and of course I activate the Nvidia Graphic Driver then I reboot and WTF again the screen was out sync or something like the the screen didn't show properly. The Application menu normally is on the upper left of the screen but this time it was on the center of screen and the Shut down button came to the left side and i have to move the mouse cursor to the right and then it would appear on the left just like the resolution is to big for the screen.
I have a Sony Vaio VGN-FZ340E. I installed Ubuntu about 6 months ago and had a problem-free time with it. I then got busy with other stuff (house work, etc.) and hadn't worked on Ubuntu for about a month. Now I switch on my Vaio with Ubuntu and I find the screen is just too bright.Since 10.04 was just coming up, I thought this would be fixed when I update. I updated, but the screen is still too bright.
I searched the forum for answers and found only some pretty old threads which were about the Fn key combos (which, obviously, doesn't work), spicctrl, etc.So I followed the instructions here. I did just what Step 1: Checking for Module says, but Terminal just doesn't give any output.
I just got a new Sony laptop running the I7 Q740m Quadcore with 4m ram w/ WIN 7 Home. I want to run Ubuntu in a Virtual machine. I am wondering if Virtual box is a good choice, or what other VM I should use? Also which version of Ubuntu, 10.10 64bit or 32bit? Would an older OS be more stable?
View 2 Replies View RelatedI just installed Ubuntu on my Sony Vaio VPCEB23FM. However, when I tried to watch videos, there was no sound coming out. I went to [URL] and tried out the link in post #5, but that completely got rid of my sound card and I no longer have any version of ALSA.
Code:
[anurag@Anurag-Vaio:~$ aplay -l
aplay: device_list:223: no soundcards found...
anurag@Anurag-Vaio:~$ lspci -v
[Code]....
I am having problems with the brightness control on my sony vaio laptop, at virst when i upgraded the driver for the VGA card the whole screen went blank, I had to port a bin file from windows and write my own EDID file to get it to work (nVidia GT 230M), but I am having problems with the brightness, although ubuntu does read the input from the keys (FN+...), the brightness refuses to change, adding the brightness applet to the taskbar does not work either. I really need to be able to change my brightness because the battery usage is off the charts.
View 1 Replies View RelatedCant install it or event boot it to try, because when i choose to install or test it the scene goes blank. I had the same problem when I had the older version but solved it whit using the custom eidi or whats is called and changing xorg.conf. But I saw that nvidia had posted the drivers for GeForce gt 330m on its site for 32 and 64 bit Linux drivers so i wanted to try the newest ubuntu. The thing is that i cant event install it or anything, so i cant use the eidi method either.
View 9 Replies View RelatedWhen I try to install Ubuntu or (having installed using Wubi) boot Ubuntu, I get a blank screen and no activity. This problem has been addressed many times but I haven't been able to get any of the proposed solutions (e.g. nomodeset, i8042.nopnp) to work. Is there another Linux or Unix-like OS that is known to work with this hardware?
Sony Vaio Y (VPCY)
NameIntel(R) HD Graphics
PNP Device IDPCIVEN_8086&DEV_0046&SUBSYS_9076104D&REV_023&115 83659&0&10
Adapter TypeIntel(R) HD Graphics (Core i3), Intel Corporation compatible
Adapter DescriptionIntel(R) HD Graphics
[Code].....
i'm trying to install ubuntu on a sony vaio. Unfortunately i cannot boot from a cd on which i have burnt the .iso file of ubuntu. The only way i managed to install ubuntu was by creating a usb bootable stick, but here also that doesn't work so well. My workaround was to use virtual clone drive which is freeware to simulate a cd rom in windows and get the iso file started. By leaving the bootable usb stick in the computer in this way it worked...
So in the end i have grub and can load ubuntu and win xp, but then by trying to format the harddrive i kind of messed things up and had to reinstall windows. Because the DVD drive only reads original cds. So from there i will attemp to reinstall ubuntu again. But how can i get rid of win xp afterwards ? If that CD Rom would only read burnt cds or if it would habe been possible to boot from usb then i wouldn't have this trouble.
I am having a problem with my new laptop Sony VPCEA1S1E. I installed Ubuntu 10.04 LTS and since then I cannot hear any sound. I have tried a lot of things before posting in here but nothing seems to work. From changing the module value in the alsa=base.conf file to installing the updated alsa drivers (drivers,utils,base}. I have also checked the alsamixer so that nothing is muted. I am struggling with this problem two days now and it does not look like I am getting somewhere. The various postings I have read so far did not work for my case.
A few things which might be useful at first:
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Oct 5 2010 for kernel 2.6.32-24-generic (SMP).
On my Sony Vaio VPCF12M1E I have a small but irritating problem: Since yesterday the numeric pad on my keyboard doesn't work anymore. I can use the numbers at the top, but not on my numpad. This happened out of nowhere when I was just setting up an access point. No idea what I did wrong, cause I only configured a static IP Reboot, and numpad was gone. I tried restarting the laptop, I tried disabling and enabling Numlock over and over again. Nothing works.
View 1 Replies View RelatedMy problem is that my sony vaio E-series (VPCEA36FA intel i5-560 4gb ram). The battery should stay at least 4 or 5 hours as i checked in windows platform but on ubuntu 10.10 it stayed only 3 hours now on 11.04 it stays only 2 hours !!! which really pisses me off, so is there any things i should know?? also the fan sometimes get so high i feel that the processor works on highest performance although am not using it that much.
View 4 Replies View RelatedI would like to install the new Ubuntu 11.04 64bit. I first booted from usb to see how the new release behaves on my laptop(sony vaio eb3m1e). The thing that does not work as it should is that the OS can't detect the GPU which is an ATI radeon 5650, when i click the additional drivers icon in order to install the proprietary drivers I only see the "no proprietary drivers are in use on this system". How can I make the OS detect the GPU?
View 1 Replies View Related
