Ubuntu Networking :: Linksys WUSB-300N 13b1:0029 No Wifi
Feb 6, 2011
My USB WIFI device is Linksys WUSB 300-N. I use Ubuntu 10.10 amd64.
I installed relevant ndiswrapper including ndigtk sucessfully.
I installed netmw245 driver under Wireless Network Drivers sucessfully. It states "Hardware present:yes"
However no connection is present.
More specifically no option regarding WIFI comes up when clicking the top right Wireless icon on the screen. However "Enable Networking" is ticked.
When I type in the terminal:
#iwconfig it shows -
lo - no wireless extensions
eth0 - no wireless extensions
View 1 Replies
ADVERTISEMENT
Jan 25, 2010
I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I appreciate any help i can receive as it will be a big plus. I really like using linux but just would like my wireless usb adapter to work.
View 1 Replies
View Related
Jan 25, 2010
I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I really like using linux but just would like my wireless usb adapter to work.
View 9 Replies
View Related
Jun 20, 2009
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
View 4 Replies
View Related
Jul 16, 2011
I bought myself a Sitecom Wireless Network USB Micro Adapter 300N X3 (Sitecom WL-364) today. When I place the adapter in my PC, it is not recognised as a wireless adapter.
There are similar posts like this one, most of them are about conflicting drivers. According to this post I shouldn't be worried about that (as I'm working in 11.04 32-bit).
The output of lsusb is this:
Code:
Bus 001 Device 003: ID 0df6:0051 Sitecom Europe B.V.
Also, I was having a hard time getting to know the chipset of the adapter. Is RT2870 the right driver for the adapter?
View 1 Replies
View Related
May 12, 2010
I'm using ubuntu 10.04 (all latest updates are installed) and when I plug my 300N Wireless USB Adapter WL-344 in my computer, Ubuntu does nothing: the light of the stick doesn't burn and ubuntu doesn't see the usb.
View 1 Replies
View Related
Jun 3, 2011
Does anyone know if there are Linux drivers available for any of the following Wireless 150N/300N USB adapters?
INTELLINET, 523974, Wireless 300N USB Adapter
INTELLINET, 524438, Wireless 150N USB Adapter
INTELLINET, 524698, Wireless 150N USB Adapter
INTELLINET, 524773, Wireless 150N Mini USB Adapter
INTELLINET, 524810, Wireless 150N PCI Card
I just can't seem to find them and they are not on the Intellinet site
View 1 Replies
View Related
Nov 21, 2010
how to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
View 9 Replies
View Related
Jun 3, 2010
I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great.
lspci -v does not list the the item. tail of the system log
Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8
Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077
Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN
Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink
[Code]...
View 1 Replies
View Related
Mar 31, 2010
I don't why this is but we have WiFi working on our computer. The only problem is that when I search for LinkSys folder or Cisco folder nothing shows up. Is there something I need to do for that? I have tried to search for it in the folders themselves by doing a search but nothing comes up.
View 7 Replies
View Related
Jan 10, 2011
how to install the drivers for my linksys wusb100 ver2 wifi card. What I have found so far is that the usb stick uses a ralink driver (rt2870) I have read that I may need to compile the driver on my system but I am not sure how.
View 9 Replies
View Related
Jan 12, 2011
Running Suse 11.3 (Gnome) on an Acer Aspire 5310 Laptop.Installed all the default broadcom drivers via install software.The following I tried:
/usr/sbin/iwlist eth0 scanning
eth0 Interface doesn't support scanning.
bodifee@linux-wv6l:~> /usr/sbin/iwconfig
lo no wireless extensions.
[code]....
So card still not active i seems.Have deleted and added wireless adapter
View 2 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Dec 1, 2010
I'm trying to connect to a friend's Linksys WAG160N router using Ubuntu 10.10, but it's just refusing to connect. I can connect to other wireless networks fine - it seems to just be this router. The wireless indicator applet thing shows that I'm trying to connect, but the password box always just pops up again and again. I'm certain I've got the password correct and am able to connect under OSX on the same computer. Connecting to it via ethernet also works fine.
View 1 Replies
View Related
May 22, 2010
Ubuntu 10.04 not seeing my WUSB300N. What is the Easiest way to get this working?
View 1 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
Feb 20, 2010
I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
May 14, 2010
I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
View 9 Replies
View Related
Jun 8, 2010
The Linksys USB Wifi Adapter (WUSB11 v2. does not work with UBUNTU.
I am using UBUNTU DESKTOP 64-bit (x86_64) 10.04, but I think it is not working in the 32-bit version as well.
I really love to get my Ubuntu work with my 64-bit hardware....
View 3 Replies
View Related
Jul 13, 2010
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies
View Related
Jul 16, 2010
I just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
View 9 Replies
View Related
Sep 2, 2010
My old ubuntu laptop beeps 3 time on startup and then freezes. This forced me to install 10.04 on a new laptop. Now I can't get the linksys wpc54gs ver 2 to get connect. I can see the router with a padlock by it. I pretty sure I have the correct password in the right spot. I can access the internet with the wire connection. I'm sure it something simple I forgot from before when the card was working in the old laptop.
View 2 Replies
View Related
Sep 3, 2010
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
View 4 Replies
View Related
Nov 11, 2010
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies
View Related
Feb 18, 2011
Here is the situation: I am currently running Ubuntu 10.10 64 bit. I'm trying to get my Linksys AE1000 to run correctly. I have followed many tutorials but most notably was:[URL].. lsmod shows that rt3572sta is loaded. network manager in gnome is able to find my router. my problem occurs when it tries to connect to the router using wpa2 security. It continually asks for the wireless password then will freeze the system after a number of attempts. After digging in for a bit, I was able to dig out a dmesg trapping the error:
BUG: unable to handle kernel paging request at ffffcfb0138af1ec
IP: [<ffffffffa021c7e8>] Cntl0idRTBssidProc+0x78/0x570 [rt3572sta]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2
I really don't see the need to continue on with those error messages lsmod still shows rt3572sta after the failure. In case anyone wants to see the changes I have made to the files before the make, I have included them. but changed the extension to "txt" to accommodate the up-loader and my rt_linux is too big to fit here, just not that it was 2 lines that were changed to work with the kernel. If anyone wants to know what I mean by the system freezes, I do mean just that. The mouse will continue to work, but I am then unable to open any programs, unable to reboot the computer. it requires a hard reset.
I have uninstalled the drivers, installed them, make them, make install them, make clean, start from scratch a few times, and am getting no give here.
View 7 Replies
View Related
