I am looking for free and well known fax command line tools for receiving and sending faxes I wan it to save receive faxes in pdf format with file name included with caller phone number and date of receive:
Quote:
for example:
5566545544-2011-5-11.pdf
and any other format that I want.
When writing a script using command-line tools why is it more difficult using graphical tools?
View 3 Replies View RelatedI'm trying to install HylaFAX but it's giving me problems. I've installed the program on my CentOS (5.4) box but I can't seem to get it to send faxes.
I've tested the modem with the minicom program and I was able to dial out to my cell phone just fine. What do I do to to find out what the problem is? Which log file does HylaFAX log to?
Tesseract is a command line ocr tool and I can't find any documents on how to use it.
View 2 Replies View RelatedI'm trying to send a text message from the command line to a cell phone. Right now I'm working with gnokii but it isn't panning out. I ranCode:echo "This is a test message" | gnokii --sendsms +17191234567 -r but it isn't working. The output I get is this
Code:
GNOKII Version 0.6.27
[code]....
I am using Redhat cluster suite. I am trying to configure cluster on linux using command line tools. I have following queries. Please answer them as early as possible.
1.Can I add node in cluster without adding fence device using command line tool? If yes then how?
2.I want to add failover domain in cluster. How can I add it using command line tool?
3.I want to add resources in cluster. How can I add it using command line tool?
4.I want to define services in cluster. How can I define them using command line tool?
I have kubuntu 9.10 and I would like to configure Ubuntu to can send mail from command line with mailx. I've saw that I need to install a MTA. But I don't know wich install and how.
I follow this tutorial:
[URL]
But when I try to send a message, in the mail.log says me:
Code:
Jan 5 10:21:33 david postfix/smtp[3795]: 41AEA41DBE: to=<pepelu@gmail.com>, relay=alt1.gmail-smtp-in.l.google.com[209.85.223.73]:25, delay=1086, d
elays=1022/0.01/32/32, dsn=4.7.0, status=deferred (host alt1.gmail-
[Code].....
i need a good lesson in using file manipulation tools on the command line
View 2 Replies View RelatedI want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
find and use the file-manipulation tools for the command line.
View 2 Replies View RelatedHow do I find the file-manipulation tools on the command line?
View 5 Replies View RelatedI'm installing a 10.04 server remotely - it's basically an RSYNC host for backups. I've got one minor issue - it's really more of an annoyance, but I would like to have it solved.When sending e-mails, the messages come in addressed to three destinations - when it's only supposed to be sent to one. What's worse is that the two additional addresses are based on the hostname of the machine.Let me explain: I use this command:Code:mail -s Testing email@somedomain.comI then compose the e-mail and send it. The mail arrive a few seconds later but addresed to the following:Code:from@hostname.domain.com;email@somedomain.com;hostname@hostname.domain.comThe "from@hostname.domain.com" has the actual word "from" in the address. I've installed many, many servers like this in the past and this is the first time that anything wonky with email has happened that I couldn't fix or explain. The machine is running postfix and I installed the bsd-mailx package to get the command line "mail" command (I used to install "mailx", but this seems to work just like the old package).
View 1 Replies View RelatedI've got some documents in DjVu which I'll like convert to PDF. Is there a way to do this using command line OSS tools?
View 2 Replies View RelatedI'm hoping to find an existing Linux tool for measuring latency:
I'm trying to diagnose how much latency my OS and NIC card are adding to TCP latency in Linux. I looked at the following tools but all (at least at the surface level) measured bandwidth (Mbps/sec) rather than latency (nanoseconds for transmition of 1 packet of size x).
If I were to write a custom test, it would likely do the following:
Client:
Create a fake message of the specified length with some padding for an incrementing identifier. Open a TCP connection (with the right parameters like TCP_NODELAY, etc) Loop and send messages containing an incrementing identifier. Store the current system time (in nanos) associated with the identifier. Listen for responses, record the current time and record the latency of that identifier asynchronously Server Listen for a connection Echo back any message received
Assuming both boxes had the same setup (configs, cards, OS, CPU, etc), are relatively close to eachother in the network, and one knows roughly the network's latency contribution, one could get a rough estimate of the OS + NIC contribution and begin testing various configurations.
One could also get a more accurate picture of the latency by using a network sniffer and snooping on the lines between the two hosts, calculating the latency between the two sides for an ID, and then subtracting that from the internally measured latency.
How do you find and use file manipulation tools on the command line?
View 1 Replies View RelatedDoes anyone know of any good command line audio editing tools? I would like one that can take an mp3 file and crop everything but the first 30 seconds or so (possibly decompressing those 30 seconds as well).
View 2 Replies View RelatedThe download bar on my conky overlay (${downspeedgraph eth0}) seems to be maxed out constantly. This is when everything should be idle with no downloads happening in the background (at least non that I know about).Are there any command line tools that can tell me what process is using my ethernet port?
View 7 Replies View RelatedI've spent a lot of time googling on this one, but could not really find anything that would convert HTML to images. Does anyone know if there are some command line tools that can do this? I need to convert simple HTML documents to images to be attached to Powerpoint presentations. Could firefox gecko be tapped into to do this without a GUI?
View 4 Replies View RelatedI'm am not remotely familiar with the linux operating sytem and just need a simple 'cut and paste solution' that will allow me to send .gz files as mail attachments, from the command line.Recently I moved my website to new hosting company, they are using cpanel and I have set up a couple of commands; the cpanel scheduler runs them for me as required.
1.creates an mysql dump and saves it to folder ( in root of my space )Works fine.2. delete the file created above, after 15 mins. Also works fineWhat I really want to do is email the .gz to myself before it is deleted, this is were I am stuck.This is possible ( I believe ) but it is beyond my understanding and ability to write the scipt/command that will make this happen.Please make any instructions really simple and clear as I am really new to this.on the server and this information is provided below and may be helpful to you (but I certainly to not know anything about this type of stuff)
I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies View RelatedI'd like to find a way of
1) capturing an RDF formatted RSS feed as a file on my computer
2) converting the result to HTML using local command line tools
I've sorted 1) with wget? I've discovered xsltproc but I'm going round in circles. The master plan is to import my pinboard bookmarks into a static web site produced on my linux box using a handful of clever bash scripts.
Is it possible to narrow down the ram command to give me JUST the free ram? Both commands that I know give me much more information that I would like to log.
Code:
free -m
This line gives me this. I really only want the one under "free"
Code:
total used free shared buffers cached
Mem: 1262 612 649 0 250 114
-/+ buffers/cache: 247 1014
Swap: 4010 6 4003
Code:
cat /proc/meminfo
This line gives me this. I really only want "MemFree"
Code:
MemTotal: 1292372 kB
MemFree: 636088 kB
Buffers: 279032 kB
Cached: 118768 kB
SwapCached: 532 kB
Active: 191408 kB
Inactive: 324684 kB .....
Yesterday i run a postfix everything works fine and today it hangs up. if i dial "telnet localhost 25" i get (before day i get 220 answer and ordinary hello):
Code:
Trying 62.197.207.43...
Connected to trons.sk.
Escape character is '^]'.
and nothing go far.
[Code]....
I installed ubuntu 10.10 server from an usb stick. I do not have access to a wired connection and do not have a CD drive, so now I need to configure the wireless connection.for that I need to have wireless-tools which if i am not wrong are not installed by default so the question is: how can I install the wireless-tools package from an usb using only command line? note: I got internet access from another ubuntu-desktop PC so i can download any package needed, etc.
View 3 Replies View Relatedi have a problem regarding our email server. all the users can send email but they cant received mail. .when hitting send receive on outlook there were no error found. .i have already reboot the server and restarted the sendmail services but still same problem.
View 1 Replies View RelatedI have followed the guide for "The Perfect Server - Debian Lenny (Debian 5.0) With BIND & Dovecot [ISPConfig 3]" and all is well, except.
I can send mail (to GMail) from commandline. I can send mail (to GMail) from any of the domains configured in ISPConfig3 through SquirrelMail (how ever terrible that looks, but functions) or IMAP/POP.
but....
I can't receive mail (from GMail) on any of the domains configured in ISPConfig3 in SquirrelMail or IMAP/POP.
I have my domains configured with proper MX records (just like I have them configured at work). I have all ports (80, 143, 110, 25, 22, etc) forwarded on my router that are needed.
I can Telnet to localhost and all checks are fine. I can send and receive from and to local domains on the same server, which makes sense. but
I can't Telnet from any external server to my server behind NAT.
Conclusion:
I figured it MUST be a network/port-forwarding problem as the external Telnet requests fails to my machine on port 25.
Tested my router if it would let met communicate through port 25 and it would.
So it must be my ISP, as I read in different posts.
Question:
Maybe I'm a n00b, but in all other posts the problems were with receiving AND sending.
My ISP responded that port 25 is blocked because of spam issues.
But I can mail (and even spam if I would like to) to external domains while I didn't do anything weird to make that happen.
The only thing I wish for is to receive mails and if you'd ask me, port 25 would be solely for outgoing mails, not for incoming mail deliveries throught MX?
An ISP surely wouldn't disable their customers in having a mail-server for incoming mails, as long as they would send out through their own smtp server to make sure they wouldn't spam the world?
We have connected two systems with ethernet cables and have configured the two systems with ipv6 addresses. The IP of one system is 2001:0db8:0:f101::1 (let's say X::1) (This system runs OS Fedora 10) and the other is 2001:0db8:0:f101::2. (Let's say X::2) (This system runs OpenSuSE 10.3) We are able to ping from both systems to the other. We are able to ssh into the one with IP X::2 from the one with IP X::1, but not vice versa.
We have disabled iptables on both systems by using the following commands:
/etc/init.d/iptables save
/etc/init.d/iptables stop
on the fedora 10 system and
# iptables -X
# iptables -t nat -F
# iptables -t nat -X
# iptables -t mangle -F
# iptables -t mangle -X
# iptables -P INPUT ACCEPT
# iptables -P FORWARD ACCEPT
# iptables -P OUTPUT ACCEPT
on the openSuse system.
The error we get in trying to ssh from the openSuse system to the fedora system is:
ssh: connect to host 2001:0db8:0:f101::1 port 22: Connection refused
We're trying to write server and client code to send data from one system to the other using SOCK_DGRAM. The code works fine when we run both the client and server on the same system. However, we are not able to send data from one system to another when we use the IPv6 addresses to run the client and server programs.
The error we get is:
sendto(): Operation not permitted
The codes we are using for the server and client programs can be found here in beej's guide here : [URL]. We've only substituted the appropriate addresses in the right places... We've disabled the iptables...
I would like to send a data using one thread and receive a data using other thread by using a same socket connection using USD sockets. The calls i am using for sending and receiving are send(), recv(). let me know is it possible to send and receive the data parallel (Full duplex communication)?
View 2 Replies View Relatedi am using centos 5.4, running squid for proxy, i want to block email sending and receiving of proxy users to secure my data. how is it possible that the proxy user can only brows websites but he can not receive or open and send or save as draft to mail box.
View 1 Replies View RelatedOne of our postfix servers is for sending/receiving internal emails only. When a user entered a wrong recipient address, it will take almost an hour for the user to get the "Recipient address rejected" email. What can be done to let the user get the "Recipient address rejected" email quickier.
View 7 Replies View Related