Ubuntu Networking :: How To Run Samba With Different Option Specifically -D

Oct 18, 2010

How do I run Samba with a different option, specifically -D? Can I do it from the GUI (system-config-samba)?Also, how do I ensure it runs and startup?

View 9 Replies


ADVERTISEMENT

Ubuntu Networking :: Get A Wireless-N Card And Asked Specifically If The One Recommened Was Supported?

Jul 17, 2010

I need to know the best Wireless card for Ubuntu. One that is supported without the "wrapper" and is supported out of the box. I know that the Wireless-N is not supported well in Ubuntu without a wrapper.

(I went to Best Buy to get a wireless-N card and asked specifically if the one they recommened was supported. They said yes. And I now doing research I find it is not.) I need to get my Unbuntu Linux desktop up and working on wireless as soon as possible.

View 2 Replies View Related

Fedora Networking :: Samba Broken / Error 6291, The "force User" Option Is No Longer Working?

Jun 15, 2009

I ran "yum update" on 03-06-2009 and it updated my samba version from

3.2.8-0.26.fc10.x86_64
to
3.2.11-0.30.fc10.x86_64

My network shares then became read only!After some digging it turns out my system is not working because of Samba bug 6291, the "force user" option is no longer working.

Ideally I would run another "yum update" and that would fix the problem. Apparently the bug has been fixed in Samba 3.4.0pre2 - when can when we expect that to be released and included when I do a "yum update"?

Alternatively how do I get back to version 3.2.8-0.26.fc10.x86_64 ?

View 2 Replies View Related

General :: Setup A Samba Share With RecycleBin Option?

May 19, 2011

I've setup a samba share with RecycleBin option. However, there is no cleanup and soon will saturate free space.

I'm trying to plan a command that each week clean the content of those dir or the directory itself.

The dir tree is like /home/ :user1
Dir1
Dir2
RecycleBin

[Code].....

To be careful to all possible situations I'm testing this line in directory with spaces in names. I know is ugly and ... and ... but users are just used to and they don't care about me And, having this line working for spaces I can use it for other situations other than shares.

File o directory non esistente = File or directory does not exist

View 3 Replies View Related

Slackware :: Change The Option To Have Samba Start During The Boot Process?

May 17, 2010

Where do I change the option to have samba start during the boot process? I've googled and I've found old posts that say it's a line in /etc/rc.d/rc.inet2 but in my semi-current box, I don't see the part about starting stopping the samba server.

View 5 Replies View Related

CentOS 5 Server :: Samba Option Pwd-must-change-time Does Not Work?

Sep 30, 2010

I have installed centos 5.4 with samba 3.0.33-3.15. Now this server is PDC for a domain with 20 xp client. I want to set the "password must change" option in the samba user detail.Now I have this configurationmaximum password age = 68256000maximum password age = 0with pdbedit -Lv pippo

View 1 Replies View Related

Ubuntu :: Set Preferred Applications More Specifically?

May 29, 2010

The Preferred Applications applet doesn't do what I need it to do.

What I'm looking for is a Win 3.x style File Association applet or config file so I can have .mp3's handled by Audacious and .m3u's handled by VLC, and so on. I'm sure it's out there somewhere, but I can't find it.

View 2 Replies View Related

Ubuntu :: Is There Any Build Specifically For Developers

Jul 20, 2010

I mainly do c/c++ development in linux...also i sometimes use java and i would really like it if i had mono also.. so i am pretty much looking for support for all major languages with ides...can u suggest me a distribution?

View 1 Replies View Related

Ubuntu :: Use Maximus Only On Specifically Selected Programs?

Mar 25, 2011

I have read a million threads about adding exceptions to Maximus, and I know how to do that, but is there any possible way of telling Maximus not to touch any programs except the ones I specifically want it to? Actually, the ONLY program I want it to touch is Firefox.

Is there some secret syntax I could put in the exceptions to the effect of "all and not firefox" (as in, make all programs an exception, except Firefox)?

View 4 Replies View Related

Ubuntu :: Use Programs Specifically Designed For Cluster Use?

Mar 28, 2011

If I was to set up a Cluster, I know it wouldn't make much difference to loading up my browser, but would all heavy duty programs (Video Encoders mainly) work with it, or would I need to use programs specifically designed for cluster use?

View 1 Replies View Related

Networking :: When Logon On Samba Domain The Windows XP Does Not Load Profiles From Samba?

Jan 3, 2011

I have update my linux server from mandriva 9 to mandriva 2010

I was working using samba 2.2.8 and now I have samba 3.5.3.I have transfer all passwd and smbpasswd to new linux.I have convert smbpasswd to tdbsam

when i am using win xp to logon on samba domain the windows XP does not load profiles from samba. I think that the problem is NTUSER.DAT storing in /home/user/profile

The same profile is working using samba 2.2.8 but not working in samba 3.5.3..

View 1 Replies View Related

Ubuntu :: Re-insert Icons To Top Panel? (Specifically Evolution)

Nov 8, 2010

I'm really new to Ubuntu, and am running 10.04. Anyway, I accidentally got rid of the Evolution icon in my Notification Area. Every time I try to put an icon in that section, it will not let me, and makes me put the icon on the left side of it, like on the main part of the panel. I do not know if I just hid the icon, or if I actually removed it, and I am sure the fix is really simple, I just can't seem to figure out how to do it. Also, I opened the Universal Access program when checking out all the cool things in my new OS, but I can't figure out how to hide that icon.
So if you could tell me how to unhide Evolution and hide Universal Access, in the Notification Area, that would be awesome.
Here is an image if you do not know where I am talking about, or whatever

View 3 Replies View Related

Fedora Networking :: Unknown Samba Password - Use Samba For File Sharing Like On A Windows Home Network

Jul 17, 2010

I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.

My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.

View 2 Replies View Related

Ubuntu Servers :: WebDAV Best Option For Internet Wide "samba-like" File Sharing?

Sep 14, 2010

What is the best option for Internet wide "samba-like" file sharing? WebDAV?

View 8 Replies View Related

Networking :: Samba Configuration - Cannot Mount Samba Share

Apr 26, 2011

Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:

setsebool -P samba_domain_controller on

Trying to connect to samba locally gives me this:

Code:

[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE

[code]....

View 6 Replies View Related

Debian Multimedia :: Specifically Inkscape Is Not Updated In 8.1

Sep 17, 2015

I have installed Debian 8.1 in several machines. Always I have a message for updating the systems I accept the upgrade.In one of the machines, where I did several upgrades, Inkscape never have been updated while in the others a updating from Inkscape 0.48 to 0.91 was made. I do not why and I would like to have Inkscape updated in all machines. is there some special condition for what packages will be presented for updating?

View 6 Replies View Related

General :: Configure The Prompt But Don't Know What The Syntax Is Specifically Doing?

Oct 20, 2010

The following line is in the /etc/bashrc file. It's fedora 8. I know this is meant to configure the prompt but I don't know what the syntax is specifically doing.PROMPT_COMMAND='echo -ne "33]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}07"'I think that 33 is the ASCII character for ESC but not sure what ]0 does or anything after the HOSTNAME variable. Are these xterm control characters? All of my Google search results fail to explain it in any kind of meaningful detail.

View 3 Replies View Related

General :: Possible To Only View Certain Chains And More Specifically Certain Chain Policies

Mar 26, 2010

Is it possible to only view certain chains and more specifically certain chain policies with options when doing: iptables -L..I would like for example view FORWARD ACCEPT rules instead of waiting for all of the drop rules to load when viewing a firewalled iptables.

View 1 Replies View Related

General :: Creating A Chroot Environment - Specifically With A Different Kernel ?

May 9, 2011

I have successfully installed a Ubuntu chroot (Maverick) on a running Linux appliance (an old Thecus N5200PRO box) which has been running various services for me quite happily.

When I attempted to add a webcam (for snapshotting) to this mix, I've come up against a problem. Since the chroot by default uses the kernel of the Thecus appliance, there appears to (understandably) be no support for the Logitech UVC webcam in the appliances' kernel; consequently inside or outside the chroot I can't access the UVC webcam.

I think I can get around this in a simple way if I can run a standard Ubuntu Maverick 32-bit kernel in the chroot.

Does anyone know how to chroot with alternative kernels, or quite simply, how to get a UVC webcam accessible on a Thecus N5200PRO?

Other details:

lsmod output
Output of uname -a:

Linux cube 2.6.23N5200 #1 PREEMPT Wed Jul 29 14:13:22 CST 2009 i686 GNU/Linux

lsusb -t output

View 2 Replies View Related

Hardware :: Any Portable Media Or Mp3 Player That Is Specifically Made For

Jan 26, 2010

Is there a Linux competitor for Zune and iPod out there? - any portable media or mp3 player that is specifically made for or by Linux? I know there are enough players that simply play mp3s off a flash memory and are therefore compatible with any OS but I am rather looking for something like Zune or iPod - doesn't have to be with touch screen but with some library interface and easy synchronisation options.

View 4 Replies View Related

Server :: Setting Up A Cluster Specifically For 3D Video Rendering?

Nov 1, 2010

I'm planning on setting up a server cluster specifically for 3D video rendering. In order to maximize speed I wanna use OpenGL hardware acceleration for that and I'm pretty sure that I have to use an NVIDIA video card if I want the whole thing working reliably. Will I be able to start an X-Server with GLX on an NVIDIA video card that doesn't have a monitor connected to it? And what will be the maximum "virtual" display resolution that I can use?

Since I wanna have several servers running side-by-side I really don't have the room for any monitors.Just to avoid misunderstandings: It is not my intention to show what's being rendered to anyone in real time. I will only create video files that can be downloaded later. I'm already pretty sure that this will work, probably using "CustomEDID" or something like that, but I don't have a suitable setup available to test it right now.

View 1 Replies View Related

Software :: Use An OLD Distribution<more Specifically -install It Onto A Hard Drive?

Jun 14, 2011

I am trying to use an OLD distribution<more specifically -install it onto a Hard Drive.>The OS is Media Linux circa 2003~4 ,it was released in Italian .However there is a choice of English on it. I have to change to SU to install. But It does Not respond to SU as password??

View 2 Replies View Related

OpenSUSE Network :: Samba Ignores "credentials" Option?

Jul 17, 2010

Linux 2.6.34-12-desktop x86_64smbd: 3.5.4-4.1-2382-SUSE-SL11.3I updated from v11.2. to v11.3.However, the SMB services were no longer mounted. The reason is that the "credentials" (or "cred") option in </etc/fstab> is ignored. If I remove "credentials" and add "username=xxx,password=yyy", the services are mounted.Has "credentials" been changed in some way? Has it been renamed?

View 9 Replies View Related

Slackware :: SAMBA Share Option 'grayed Out' In The Share Dialog?

Mar 18, 2011

I am attempting to share a folder from an existing drive that has been formatted in NTFS. I simply right click on the folder, goto share, and I can see the option to share to UNIX and that works with no problems. My question is; why is the SAMBA sharing dialog grayed out?

View 1 Replies View Related

Server :: Determining System Limits Affecting Apache - Specifically RLimitMEM

Mar 15, 2011

Our Apache server is pretty much configured straight out of the box, and I've noticed it is using far more CPU and less memory than another server where I have the following:

RLimitCPU 8
RLimitMEM 100000000
RLimitNPROC 24

The Apache documentation says that if these aren't set, the values are obtain from the OS. How can you tell what those are? I'd like to see if I can tune Apache's performance, but I don't even know if these values are higher or lower than what it's currently using...

View 5 Replies View Related

OpenSUSE Hardware :: After Installing 11.3x86_64 Specifically For The ATI Radeon HD 4850 Proprietary Driver - Having Intense Screen Tearing

Sep 4, 2011

After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.

View 4 Replies View Related

Debian Configuration :: "Windows Printer Via Samba" Option - Add One By Selecting Add->Printer

Aug 11, 2011

I'm using an up-to-date installation of Squeeze with the default Gnome desktop and am trying to print. My knowledge of configuring printers is very limited if it even exists. Since a friend of mine is able to print from her Ubuntu computer, my plan is to copy her. Here's how she does it. She goes under System->Administration->Printing on the desktop. Then a window pops up titled "Printing" that lists various printers that are supposed to exist. It's possible to add one by selecting Add->Printer. It asks for the root password and then a new window pops up titled "New Printer" which has a subwindow called "Select Device" In my case, the "Select Device" window has the following options to choose from:

- AppSocket/HP JetDirect
- Internet Printing Protocol (ipp)
- LPD/LPR Host or Printer

In her case, she has an extra option called "Windows Printer via Samba". This is the option that she uses. The other options don't seem to work for her. I'm assuming that I just need to install some package in order to make this option magically pop up for me. Does anyone know what package this may be? I currently have the packages smbclient, samba-common and samba-common-bin installed..........

View 1 Replies View Related

Ubuntu :: Auto Login Option / Can Undo This Option?

Nov 5, 2010

I installed Maverick with auto login. One could undo this by reinstalling I suppose, but is there an easier way to get back to the standard form of login?Hopefully that will cause my default key ring to unlock correctly.

View 3 Replies View Related

Ubuntu Networking :: Samba And Windows Networking - Read / Write Access To All Folders Contents From Both Machines

Mar 9, 2011

Ive managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?

View 7 Replies View Related

Ubuntu Networking :: No WPA Option During Wireless Connection?

Aug 10, 2010

I have a BCM4312 wireless card, using the B43 drivers. It works perfectly fine, except when I bought a new Buffalo Router. I set up the wireless security to be WPA2, but when I use my laptop to connect, the only options are WEP 40/128 key, WEP 128 bit passphrase, LEAP and Dynamic. No WPA of any kind. When I go to edit the wireless settings, I can change the security to WPA2 but when I try to connect again, the wireless manager simply creates another wireless profile with the exact same name with the security WEP. What do I do about this stubborn wireless manager?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved