Ubuntu Networking :: File And Printer Sharing Between Wired And Wireless Machines
Apr 28, 2011
I have:
1) A desktop PC running Ubuntu 10.04 and a Virtualbox guest, Windows XP. My printer is connected and operates via XP. Yep, its a Windows-only printer, but the VB file-sharing allows me to print Ubuntu files.
2.) Another desktop running Puppy Linux.
3.) A netbook running XP as a native install.
No. 1 and 2 are connected to a Level One router by ethernet cable. No. 3 is wireless. All 3 machines work fine independently, with no problems accessing the internet. Getting these machines to "see" each other seems to be harder than falling off a log! How to share files and the printer, especially on how to configure the router. The manual that came with it doesn't seem to explain how to do this. It assumes that all your devices are either wired or wireless, with no hints about how to network wired and wireless machines together.
View 1 Replies
ADVERTISEMENT
Aug 29, 2010
For the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.
View 8 Replies
View Related
Nov 15, 2010
I'm having issues setting up file sharing between two Linux machines. I've tried the forum cookie cutter answer of "right click folder, sharing options, share, allow others to write and edit, allow guest accounts", but I simply cannot get my two Ubuntu 10.10 machines to see each others shared files. I HAVE been able to download and use the program "Personal File Sharing", and with it I CAN share the "Shared" folder between both machines. I'd prefer to learn the correct way to link these two boxes up though, and be able to share more than 1 directory. Am I missing any programs to complete this link? Do I need to use Samba? I've tinkered with it, and I can get both computers to see a workgroup name I set up, but cannot get them to view each other in it.
View 9 Replies
View Related
May 27, 2010
Problem: Neither Ubuntu 10.04 Lucid Lynx 64 bit machine can access any shared folders on windows PC's, or on the other Ubuntu machine. However, my windows machine CAN access the folders I've set up to share with Samba.
When I click Places>Network it FINDS the other computers, but when I double click one of the other machines the "wait" pointer comes up and then it says: blah blah blah... "The folder could not be displayed: Sorry, could not display all the contents of "Windows shares on debbie-desktop": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Why can the windows computers access shared files FROM linux, but the linux computers can't access anything non-local?
View 9 Replies
View Related
Apr 17, 2010
I want to learn how to build a Linux network from scratch that includes file and printer sharing, intranet. I have an intermediate-level knowledge of Windows networking. Can anyone suggest a book or online tutorial that I can learn from? Now let me be clear: I am finding no shortage of tutorials on the web. However, too many are old or incomplete.
A little extra info: I am a teacher/network admin for a small private school with about 50 student computers (that I wish to become Linux machines in the future) and about 10 staff computers (mostly Windows laptops--I do not expect the staff to convert to Linux as readily), I currently do not have an intranet implemented.
View 1 Replies
View Related
Jul 13, 2010
I want to share home directories from two different machines so that I can log on to both using the same account.
One idea was to host the home directory on a server and mount it to a local directory. I don't think this will work though, because I'm pretty sure the directory wont be mounted until the logon session starts and I'm guessing it wont without the appropriate home directory.
So the question becomes, what tells the OS where the home directory is in the first place. Yes it's in a default place but that path as to be stored in some config file somewhere right?
But another problem is... If the server goes down, I'll have to make sure I can log on via root at the logon screen/get into a terminal/use LiveCD to get access.
It wouldn't be too much of a problem to create an account on each machine, all my media will be on the server anyway. But if I create an account on one, it would be nice if it was automatically added to the other. And it would be great for keeping settings if I want to do a compete wipe if I'm upgrading the file-system or something. I suppose I could just do a backup like everyone else..
View 1 Replies
View Related
Oct 28, 2010
I am running 10.4 on a number of machines but can not create a network and share media and directories between them. I can not find any machines on my network. I know smb is installed because I used it when running windows. I have not used Ubuntu or any other Linux OS to run a network before,
View 9 Replies
View Related
Dec 10, 2010
Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.
Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.
How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?
View 3 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
May 31, 2010
I am trying to set up a LAN with some basic file and printer sharing, as well as either a VPN or FTP server. I am setting up a server for an office with about 4 computers and one remote computer at a home office. I would like the server to back up a selected group of folders on all of the computers as well as share some printers between them all as well. If all of the other computers are windows computers will Ubuntu work for something like this? I would also like to host a website and e-mail server as well if the server is not loaded down too much. I know I can get windows server to work, but I would like to use something else if possible.
View 3 Replies
View Related
Dec 17, 2010
I'm going to be setting up our company with a in office server in the next few days. I wanted to use ubuntu as my servers OS but after reading some of the documentations I come to realize there is no X server in the server OS. I am OK with doing everything in terminal but would prefer to do some things in a graphic interface. Am I able to install the Xfree86 and be able to configure some stuff through that? Also the machine I am building for the server is not a true server machine just a really fast computer with lots of memory and space. The specs are a 3.1 AMD 64bit processor, 16gig ram, 2x 1TB hdd 7200rpm sata.
If the X server isn't a possibility on the server OS, I have read you can install all the server repositories on the Desktop Editions. Would that be a better option for me? Here is what I would like the server to do. I am going to be running quick books on the server with 1 workstation that is dedicated to it. We have 3 workstations and 3 users. We also would like to implement a Shared filing system and print server. Eventually when our current contract with our web host expires we would like to migrate the base website (not the ecom side) to this server.
View 3 Replies
View Related
Feb 9, 2009
I have a machine running fedora 10 that has a printer in cups that i want to share to the windows machines on the network.I cant find any mention of shareing printers in the cups interface
View 1 Replies
View Related
Nov 1, 2010
I have been working through setting up a CUPS server on my Dell Dimension 2000 which is running Ubuntu 10.04. I have the server set up and the printer added and have gone through all of the steps the tutorials suggest to get the printer to be viewed on the network (set it to shared, allow other machines to view shared printers, etc). However, I can't find this printer on any of the other machine on my LAN (one machine running mac os x the other running Ubuntu 10.10).
View 2 Replies
View Related
Jul 7, 2011
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies
View Related
May 24, 2009
I have Fedora 10 with 2 nic's and have used the firewall tool, network manager, etc.,then disabled the firewall front end and wrote my own iptables rules but can not even enable eth1 to use it. Tried 2 different common cards (like a network everywhere 10/100) Service network restart says eth1 not there.
Right now Ive:
eth0 connects direct to internet via my cable ISP.eth1 I've set as 192.168.1.1, netmask 255.255.255.0, gateway I wasn't sure but I set as my IP on eth0 isp supplied. DNS wasn't sure, just left blank.
But I can't even enable eth1 to test those settings.
then with gui firewall crap disabled I wrote my own iptables ruleset: (kernel flagged for ip forwarding)
with all chain policies set to allow.
Code:
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -j DROP
iptables -t nat -A POSTROUTING --out-interface eth0 -j MASQUERADE
iptables -A FORWARD --in-interface eth1 -j ACCEPT
And on the slackware box (ethernet switched btw) I set up static IP 192.168.1.100 w/ eth1 on fedora
as gateway.
But like I said, fedora refuses to enable eth1. Been reading and googling last night and all morn.
(p.s. gnome, but all the tools are confusing the crap outta me, They seem to work against each other. I'm used to just bash.)
View 4 Replies
View Related
Jan 6, 2011
i have a printer which is shared across the network. All the computers have ubuntu installed. I want that some computers should not be allowed to use this printer.
View 8 Replies
View Related
Jun 5, 2011
Printer sharing on my Win home network.
The problem is it won't. I have an Ubuntu (11.04) computer cabled to a Belkin wireless router. The Brother printer is usb connected to the Ubuntu box - there is no problem printing directly. However, I need to print from a separate wireless connected Win7 box to the printer on the Ubuntu box and this does not work.
The Win7 can see all other Win computers on the network, but not the Ubuntu. Answers at my level gratefully received (eg: it took me two weeks, many hours and 3 re-installs to get dvds to play on Ubuntu 10). Current printer sharing information on the internet is either hopelessly above my head or outdated.
View 9 Replies
View Related
May 16, 2009
I'm going to setup a File and Printer Sharing in my little home network... 3 Computers actively connected to the Web through a single ADSL2+ Wireless Router (number of Computers will increase later) At the moment 2 of the computers are running Fedora 10 and 1 running Windows XP...
Now i want to setup the 3 machines to use 1 printer which is connected to one of the Fedora 10 machines, and i want File Sharing to be enabled so each machine can easily view each others shared files and also be able to print when ever needed (ofcourse the machine with the printer will have to be on for the printing process to happen) I've installed Samaba on each Fedora Machine, enabled sharing but i dont seem to be able to view the Windows machine or each other....
View 6 Replies
View Related
Oct 20, 2010
I just installed an HP Officejet 6200 on a Slackware 12.1 machine. It uses a USB interface. If I am on the machine, I can print to it with no problem. When I am on my Debian or Centos machines, I cannot. I have midified the cupsd.conf file to allow everyone to connect to it but so far have not had any success. Port 631 is open on all machines. I have explicitly added a hosts allow 192.168.0.0/24 line in several portions of the conf file with no luck. If I use the cups interface on any of the machines using localhost:631 as the address, I can not only see the printer I can print to it, but I noticed, I am actually attached to the Slackware machine where the printer is located. Can someone suggest a debugging method to help?
View 7 Replies
View Related
Jan 31, 2011
I am having problems trying to share a printer on my desktop. The printer is an HP Laserjet 1020, and the desktop is running 64-bit Ubuntu Karmic. None of the other boxes on the network (wired/wireless, 32-bit/64-bit, Ubuntu Lucid/Win7/XP) can access the printer.
I have checked all of the appropriate boxes in printer properties and server settings. When I try to install the printer on the other systems, I am asked for a username and password on the desktop. I set up a user named "printer" and gave it a password, but when I try to use that username/password to install the printer on one of the other systems, I get an "access denied" error. All of the networked systems can see each other, and access shared files.
View 2 Replies
View Related
Feb 6, 2010
In my firewall I have these ports open:
21
143
110
[code]...
View 9 Replies
View Related
Aug 16, 2010
I have a parallel printer working on a desktop. I want to share it with my laptop, but I don't want to have to use samba. Both have ubuntu 10.04 installed.
I'm sure it can be done, but I'll be darned if I can find anything in the skimpy admin. tools.
View 1 Replies
View Related
Jul 27, 2011
I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
View 1 Replies
View Related
Jan 26, 2010
I have got a wireless network in my house with a router as the hub and my Linux Laptop and Macbook connecting to it. I have got a wireless Kodak printer which the Macbook uses, but they do not have any drivers for Linux. I have enabled ssh for both the laptops and have enabled "Print sharing" on the Macbook. Can I access the printer from the Linux laptop via the Macbook? When I have sshed to the macbook, the kodak printer comes up in the list of printers to choose from...but the printing job just goes to the queue, but does not actually complete. Is this because I have not got the drivers for the linux laptop?
View 1 Replies
View Related
Aug 6, 2010
probably missed something really small but ive got an old celeron 2.4GHz laptop with a busted inverter and no VGA output (it too is broke off) and ive decided to use it as a file and maybe print server. the folders i want to share are on an external drive so i added the line
usershare owner only = false to the global section in the smb.conf file yet it wont share the folders. both are using lucid. PS how to you do the code boxes? PSS if you wanna know how i can see the screen just ask
View 9 Replies
View Related
Jun 26, 2010
I installed it on a desktop today to try it out. So far I'm loving it and have gotten everything to work except for one thing:
There's a printer connected to it (HP PSC 1600), and I'd like the other computers on the network to be able to print to that computer. The other computers are running Windows 7, and one is running Snow Leopard.
When I plugged in the printer, Ubuntu recognized it almost immediately and installed it. Wonderful! I then went ahead and set it to be Shared, and hoped for the best. Neither the Windows machine or the OS X machine could find the printer...even after I pointed them directly at what I thought was the CUPS address (\mycomputername:631). To make matters even more confusing, I was able to set up shared folders and have the other computers be able to view them.
View 9 Replies
View Related
Jun 20, 2009
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
View 6 Replies
View Related
Jan 9, 2009
I'm looking for a SIMPLE solution for printer sharing. I have an HP printer attached to my Linux host (prints fine from there). I want my XP box to be able to use this printer as well. I can ping my XP box from my Linux box (and vice versa), and the XP box has the HP print driver installed.When I go into my XP box and try to add a printer, I click "A network printer or a printer attached to another computer", then "Connetc to a printer on the Internet or on a home office network" and enter my printer.I'm using the printer name as show in CUPS. I also tried it without port 631. Either way, I get an error message saying "Windows cannot connect to the printer. Either the printer name was typed incorrectly or the specified printer has lost its connection to the server.
View 5 Replies
View Related
Nov 4, 2010
I have a problem sharing files between two machines on my network, one, my main one running 10.10 and the other running Lubuntu. I've used the share files option on my main computer, and they show up on the Lubuntu machine, but when I try accessing the files, I get a message telling me that they'failed to mount'. It's frustrating in that I can see that the files are there, and obviously the Lubuntu machine can 'see' them too. I'm sure that I must have missed out something, and I've tried searching, but so far have only come accross some very old tutorials that just confuse me more. Surely there must be a fool proof way of getting this all working? (I've tried Giver, but the Lubuntu machine refuses to run Giver!)
View 3 Replies
View Related
Mar 18, 2010
I have Ubuntu 9.10 installed on a VM Server 2.02 with a Win7 32 bit host. When the host is wired into my network, the Guest (Ubuntu) has internet conductivity. However when the host is connected via Wireless, the Guest Does not have any internet connectivity. The VM Network connection is set to Bridged.
View 1 Replies
View Related
