Ubuntu Networking :: Crossover Transfer From Vista
Oct 9, 2010
So i have a Vista desktop wirelessy connected to the router and a laptop running UNR 10.04. I used a Gigaware Cat5e crossover network cable to connect the desktop and laptop, and the lights light up orange so it's responsive i guess. I installed samba and can access my shared files on vista from my laptop but the transfer is 1mb/sec, i was hoping the crossover could help achieve something like 50mb/sec. Which is why i don't think i set it up right at all. How can I connect vista to ubuntu via crossover cables to transfer files?
View 4 Replies
ADVERTISEMENT
Jan 2, 2010
im trying to get the files off of my unbootable laptop with ubuntu live cd. The problem i have is that i get into ubuntu then go to the computer option but i dont see the C: drive where my files are stored. How can i make it so i can see the hard drive in the laptop so i can copy my files to an external hard drive?
View 9 Replies
View Related
Apr 8, 2010
Ive just installed ubuntu on a small nettop type pc. It can connect to the internet but I want a direct network connection thru gigabit LAN using a crossover (apparently a straight cable would have been sufficient). Anyway, I have no idea where to begin. The network connection manager in Ubuntu shows Autoeth1 which is right and, if I manually set the IPv4 I can get the PCs to somehow see each other and the 7 pc to give a 'network access only' but that's it.
View 2 Replies
View Related
Oct 13, 2010
I've been reading too much and understanding too little. What I have: Lucid laptop & desktop. Both have ethernet > hub > internet. What I want: connect them directly by the serial ports so the laptop can access the desktop's drives, and the desktop can be retired from the internet. I've got an old DB-25 null-modem, last used for multiplayer Doom. The laptop's dock has DB-9, so the connections is desktop > null-modem > Belkin DB-25 - DB-9 cable > laptop.
I had hoped this post would get me somewhere:[URL].. No such luck. When I ping 'grin.local', the connection is through the internet. If I disconnect the hub, i cannot ping.
Dunno if there's something more I should do to enable serial connection in Lucid, or if my null-modem is no longer good. I'm also rather curious how "grin.local" manages a connection through my ISP's system. These are DHCP. Shouldn't that have required the full numerical IP?
(It's nothing to do with the hub. Checked that by connecting a third box to the hub. My ISP only hands out two IP. I couldn't ping the third box.)
View 5 Replies
View Related
Feb 15, 2011
got a watchguard firebox 1000 here, old tech i know, the manuals/pdfs on their site want me to use a crossover cable for the quick setup and I havent got any at the moment, but I got dozens of normal patch cables and switches. Can I use 2 patch cables on a switch to simulate a crossover cable scenario? If so ... would there be anything extra to do to make that method work? --tia
this thread indicates there is no difference other than what they mention in the thread? confirmation on that? [URL]
View 2 Replies
View Related
May 2, 2010
I have a desktop running Ubuntu 8.04. I installed 10.04 on my laptop. When I mount my desktop music folder on my laptop and transfer files, they now only go at 100-200 KB/s. When I had 9.10 installed, they transferred at 1-2 MB/s.
This is the command I use to mount the directory:
sshfs matt@169.254.6.233:/home/matt/Music/ /home/matt/Music/desktop/
Is there any way I can speed it up to get it back to max speed?
View 1 Replies
View Related
Feb 14, 2011
At the outset I would like to tell everyone that I am still relatively a newbie in linux. I use a usb mobile broadband data card to connect to the internet, and I recently purchased another desktop for my wife. Both of us do not share any files, but I do not have a router and was wondering if I could share my connection with her using a crossover cable.I did a lot of Googling around and tried various different things, I even followed another thread in the same forum but the most that I have got is my network manager saying that connection has been established. I am however not able to see her computer under my windows network and don't know how to proceed.I don't know where I am going wrong, and considering that my knowledge of networking is at below basement level, I would really appreciate any help in this regard.
View 2 Replies
View Related
May 31, 2010
I tried to connect two ubuntu computers via crossover network. But sometimes they can connect and see each other and even ping each other and sometimes not!
Each time, each of my PC's can ping it's own IP address but may not ping the other PC. I tried to disconnect cable, reconnect, disable network, enable it again, change IP address, disconnect via Network Manager Applet, reconnect and... . But when one of them don't want to connect I can't do this anyway!
Anyone knows what must be the problem? Sometimes it took about many seconds to get them connected, and sometimes they can't connect for many hours.
I must add that I have an ADSL modem on one of two Ubuntu PCs that connect via another cable.
View 9 Replies
View Related
Jun 24, 2011
Here is the setup I have. Two debain (squeeze machines) A1(eth0,192.168.33.1, netmask 255.255.255.0) and B1(eth0,192.168.43.1, netmask 255.255.255.0). They both have 3 nics'. So I am trying to connect to each other with a crossover cable and I have added the routes manually. eg: on machine A1 route added was
route add -net 192.168.43.0 netmask 255.255.255.0 gw 192.168.33.2 eth1
and on machine B1
route add -net 192.168.33.0 netmask 255.255.255.0 gw 192.168.43.2 eth1
For project purposes they both have to be on different networks, evn thouhg they are in same room.
View 13 Replies
View Related
Feb 12, 2009
I have dell dimension 4700 I installed slackware 12.2 onto with the of making it a headless home network jukebox that I could ssh into and control via a crossover cable.From other posts I've seen, it looks like I just need to set up the IP addresses under the same netmask, and can use ssh then. On the slackware machine, it does not seem to recognize an eth device.
Code:
# dmesg | grep eth
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
[code]....
View 14 Replies
View Related
Feb 7, 2011
i am not able to set up a crossover connection between 2 CENTOS 5.5 boxes.
View 4 Replies
View Related
Jun 17, 2010
How to Transfer 4 versions of Vista and Windows-7 installation DVDs into a flash drive The recent versions of MS Windows of Vista and Windows 7 installers support booting from a USB device so it is possible to transfer the contents of the installation DVD to a flash drive and use it for booting. A USB flash drive however is classified by M$ as a �Super floppy� that can only have one partition. This means one flash drive can store one MS Windows boot loader.
This tutorial shows how to use Grub, a Linux boot loader, to boot 4 Vista/Windows 7 installation in one flash drive. Technical consideration
(1) I have checked to my satisfaction that none of the MS Windows of Win2k, Xp, Vista and Win7 can mount or see more than one partition in a flash drive. That doesn't mean the user can't have multiple partitions. It is just MS systems have been engineered to mount the first one it recognises and disregards the rest.
(2) MS Windows installers of Vista and Win7 do not like to be booted from a logical partition. As a flash drive with a Msdos partition table can have a maximum 4 primary partitions hence this tutorial describes 4 versions of MS Windows installers of Vista Home-32, Win7 Ultimate-32, Vista Home-64 and Win7 professional-64
[Code]...
View 1 Replies
View Related
Mar 3, 2011
I have a home network and I use Samba to share files. Now when I am on the network, I can see the shares just fine, but if I use a crossover cable, I cannot see or access the folders or files.My goal is to use a crossover cable from one computer with clonezilla to my server in order to use Samba to make an image of my workstation and save the image on my server.But everytime I try to connect with clonezilla I get a persmissions error and the share will not mount. I tried going to the shell and mounting as root, but that did not work either.
I have another server which is only a console and it works though I am unsure why. The share though is a mounted usb drive while on the one that does not work, it is on the internal hard drive.I was wondering if anyone had any ideas or anything I could try to narrow down the problem. Oh, I can access the share using ssh, but not samba. One other thing, the shares are set to allow read/write access to everyone so I don't see why I can not access it.
View 3 Replies
View Related
Jan 6, 2011
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
View 2 Replies
View Related
Nov 24, 2010
After a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
View 3 Replies
View Related
May 9, 2010
I'm trying to connect 2 Ubuntu computers with a crossover cable (ethernet). I found the following thread:
[URL]
Its says to go to:
1. In System > Preferences > Network Connections
and under IPv4 tab, change Method to Link-Local Only.
The problem for me is I'm using Xubuntu 9.04 (on 1 of them) and I don't have "Network Connections". Is there a way to get this utility in Xubuntu 9.04 so I can set the method to 'Link local only' ?
View 2 Replies
View Related
Jun 19, 2010
So, the only way to have bass is to use PulseAudio and edit daemon.conf to enable-lfe-remixing? Well, damn, but alright. how do I fine-tune low frequency reproduction (since my satellites can't handle anything below 150Hz)?
View 2 Replies
View Related
Nov 2, 2010
whilst trying to install a program under crossover 9, earlier, it piped up with:
Quote:
Warning your SHM block limit is set to 33554432. The value is tpp small, for the latest version of VPS file. Please enlarge 'kernel.shmmax' value.
See screenshot, for more details. I'm running Ubuntu 10.10.
Where would I go to achive the results required.
View 5 Replies
View Related
Sep 16, 2010
I have install Ubuntu 10.04 version. Then install Crossover 9 and run Internet Explore 7 on the crossover. Now I need to access web based system through IE7 which is java applet enabled system and also I have already installed java runtime environment on crossover. But that system can not access through IE7 it given some errors.
View 1 Replies
View Related
Apr 24, 2011
At the end of installing crossover pro 9.1, I was provided the following message:
Code:
cxmenu:error: unable to parse '/etc/xdg/menus/unity-place-applications.menu': Invalid string in comment field [Ln: 157, Col: 8]
I opened unity-place-applications.menu and looked at that line. Starting with line 155:
Code:
<!-- System Tools-->
[Code]...
I'm guessing that the comment lines that start with just "--" are generating the error. Does anyone know what the section is and what it should look like for the crossover menu items, such as installing windows software?
View 1 Replies
View Related
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Jan 22, 2010
I have been able to successfully install Acrobat 4 on CrossOver 8.0.0. I recently purchased Acrobat 9, but could not install it. Everything seems to go smoothly except that the serial number is rejected by the Acrobat installer.
1. Has anybody successfully installed a recent version of Acrobat on WINE or CrossOver?
2. What is it about WINE that would interfere with the serial number?
(I successfully installed on WinXP, so I do have a good S/N.)
View 8 Replies
View Related
Mar 18, 2011
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies
View Related
Apr 6, 2011
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies
View Related
Mar 5, 2011
I use Linux Mint 10 and have been on Linux for about a year now. I'm no expert, but I can sort of find my way around. My problem is that I am not able to set up a LAN and share my internet connection through a crossover cable. I have a USB 3G data card for my internet connection, and getting a router for it is a mite expensive. I have a crossover cable and searching on the net led me to believe that I could do what I want to. The only problem is that I am unable to.I've got two desktops both on the same Mint 10 and when I connect them assign an IP address and gateway, my network manager shows that the connection is up, but I'm not able to ping the other system. I've even exited my firestarter firewall in case that was what was causing the problem, but I've not found a solution as yet.My knowledge of networking is at that dangerous stage where I know very little, but think I know a lot. What I've learnt about networking I've learned over the past one month when looking around for solutions to my problem but my basic understanding leaves a lot to be desired.
View 6 Replies
View Related
Mar 22, 2011
I am trying to boot up Vista Home Premium from USB since my internal (bootable) CD-RW drive has failed and I cannot boot up Vista from CD.
I have Ubuntu running in the Windows partition and all my windows files are in there so I don't want to do a full installation of Ubuntu (yet).
I formatted an 8GB USB stick into two partitions
I then copied over to /dev/sdb1 all files from a Vista CD using an external CD-RW drive (which is not recognised as bootable on USB port).
In my Dell BIOS settings I changed the boot sequence to be bootable from USB disk first.
then I tried to reboot Vista installation in the USB stick.
But I get this message ..."this is not a bootable disk .. insert a bootable floppy"
So I could not boot up the Vista installation files.
When the boot flag is "on" in a GParted created partition does this make the partition DOS bootable for Vista installation?
My question is - What utility in Ubuntu 10.10 can create a DOS bootable partition on a USB stick? It seems that the MBR might have been overwritten when I installed Grub 2.0.
I can Grub dual boot between Windows and Ubuntu but I can't get very far with Windows .. stalls in safe mode.
So a Vista repair is called for. I would prefer not to reinstall Vista afresh at this stage.
There is a thread here explaining how to repair Vista bootloader
[url]
But it assumes that I am able to boot from CD-RW drive.
View 6 Replies
View Related
Jun 12, 2010
when I try to transfer a folder from the desktop machine to laptop I get the following:
Code:
morad@linux-m9c6:~> cd /data/
morad@linux-m9c6:/data> scp -r nobani@192.168.1.3:/data/geant .
Password:
[Code]....
View 2 Replies
View Related
Feb 14, 2011
I have been transferring files over the network. But I am sure It should be HEAPS faster than 8MB/sec
View 5 Replies
View Related
Jul 26, 2011
Recently I had a situation where I had to transfer data from a PC to a Mac. Usually we simply convert the data as necessary, ie. bookmarks, contacts, etc. move the info to a dropbox account and use Windows networking to access the dropbox from a Mac. Well, there was a network issue and it was suggested that I boot to Ubuntu and do this. We do have Ubuntu on a flash drive but I was lost from there. Can anyone point me in the direction of documentation or assist me in understanding how this would be accomplished? I have a Mac, PC and Linux box at home so hopefully I have all the necessary tools to test this out.
View 2 Replies
View Related
Jan 20, 2010
using Slackware 13.0, and whenever i trasfer my files to USB, like copy or cut and paste, it will show as if file transfered in an instant,like click paste and poof.the whole 1 gig file transferred in one second, and it wont show dialog box of transfer process, and then i have to predict some minutes and wait (till the transfer actually finishes, i have to usually see my USB's transfer indicator light), if i plug out before or my prediction goes wrong, i end up with corrupted files. This aint related to window manager, as same is case for KDE and XFCE tried thunar, konqueror, midnight commander, all of em resulted with same problem.
View 6 Replies
View Related
