Ubuntu Networking :: 8.04 Box Plugged Into Wireless Router Cannont Access Internet?
Jun 5, 2010
I have I fileserver on my home network. It has a static IP and is plugged into the back of the wireless router. It is fine on the network but cannot access the internet. I noticed this when I was trying to update my package list. This is what is in /network/ interfaces:
auto eth0
iface eth0 inet static
address 192.168.2.100
netmask 255.255.255.0
network 192.168.2.1
broadcast 192.168.2.255
gateway 192.168.2.1
[Code]...
View 2 Replies
ADVERTISEMENT
Apr 18, 2010
I have a dual-boot desktop with Windows 7 and Ubuntu.Problem: Linux does not recognize my D-Link DWA-131 Wireless N USB Adapter. So, I can't access my wireless router or the internet.D-Link has a Linux driver for the DWA-131 posted on their website URL...that includes a readme file with long, strange, convoluted instructions on how to install the driver.
View 9 Replies
View Related
Oct 27, 2010
At work, we (like almost everyone) are still full-on windows. I am currently trying to get away from windows because I am not a fan. my current windows machine (different from my Ubuntu machine) is accessing the wireless network fine, and there are no obvious problems there. Also, my Ubuntu machine can access my wireless network at home, so I know there are no driver issues. I set up the connection for the Ubuntu machine, and it seems to be connecting OK. I can ping internal IPs and by all statuses, the connection to the router is functioning. However, when I attempt to load a web page or ping a domain or external IP, it fails. I tried to ping the IP, thinking if that worked, it's probably the DNS, but pinging both domains or IPs fails. I have looked around at forums and posts, but none of them seem to match my issue (that's probably not true, but I am struggling to see the commonality).
Here are the results of "netstat -r":
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.45.0 * 255.255.255.0 U 2 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.45.5 0.0.0.0 UG 0 0 0 wlan0
And here is "ifconfig":
wlan0 Link encao:Ethernet HWaddr 74:f0:6d:XX:XX:XX
inet addr:192.168.45.49 Bcast:192.168.45.255 Mask:255.255.255.0
inet6 addr:fe80::76f0:6dff:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 3 Replies
View Related
Jun 9, 2010
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
View 1 Replies
View Related
Jan 9, 2010
I've installed ubuntu 9.10 64bit onto a usb flash drive and found that even though I can connect to my safecom adsl modem/router I can't get an internet connection, the previous versions work and it works with a Linksys router. Is this a known issue with a fix?
I'm using a Toshiba satelite pro!
View 5 Replies
View Related
Mar 1, 2010
I changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies
View Related
Apr 28, 2011
Today I set my HPG50 with Ubuntu 10.10. I used network install disk, then tasksel to add Ubuntu Desktop. Everything was fine, I set up my samba shares and a few other things. I had the NM icon on the panel but did have to configure. I was on wired connection and I could surf no problem. When I went to set up the wireless, I noticed the icon was gone. I know it was there after the install. At some point the network manager icon disappeared, not sure when because I could still access the router and internet. I spent a few hours surfing google and the forums trying to find an answer. Then, after running update and upgrade I lost internet. Even though I could see the router, I connected straight to the modem, still no internet access. I unplugged the cable from that machine and plugged it into my other system and I could surf just fine.
It was clear that nm-applet was running from running nm-applet at the terminal - nm-applet - "An instance of nm-applet is already running - Warn Couldn't initialize the D-Bus manager. nm-tool - State - connected, Driver r8169, State Unmanaged, Default no. NetworkManager.State - All three entries are set to "true". It seems clear that some other app is managing my connection as I can access the router and am currently serving video to my apple tv from this system. How do I find which app is managing my connection?
View 9 Replies
View Related
Jul 3, 2011
We just set up a password for our wireless router (D-link DIR-615). WPA personal. After doing that, I can no longer connect to the internet. I can connect to the wireless router, however. Same problem for the Apple Macs in the house. We called Dlink. The fix for a Mac was to add DNS servers (4.2.2.2) under TCP/IP But there doesn't seem to be anywhere to specify a DNS server in Ubuntu.
View 8 Replies
View Related
Aug 24, 2010
us robotics router, trying to access 192.168.2.1, worked on windows xp, just switched to lucidi have tried using both firefox and chrome, neither will access my router
View 7 Replies
View Related
Apr 1, 2011
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
View 5 Replies
View Related
Jul 30, 2010
I connect my internet using pppoe to may DSL modem with bridging mode, and it goes fine until I try to put a wireless router between my PC and the modem. After I configure both modem and the router, I can run my wireless network fine by connecting it from a laptop, but my PC is unable to reach the modem at this configuration.
PC has address 192.168.2.100
Router has address 192.168.2.2
Modem has address 192.168.2.1
all with netmask 255.255.255.0
With bridging configuration in modem and automatic detect configuration in the wireless router, the wireless network run well, except the PC cannot ping the Modem saying that
Code:
root@firefly:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.100 icmp_seq=2 Destination Host Unreachable
Looks like my PC, which has Slackware 13.0, don't know how to reach the modem even they are physically connected.
1. how can I configure the modem, PC, and router so that the PC can reach the router? Do I need to do add route gateway from the PC?
2. How can I configure internet connection from the PC (before I use PPPoE)?
3. How can I configure the modem, PC, and router so that the wireless network is on?
View 7 Replies
View Related
Jan 22, 2010
I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem. I just need to know how to configure my modem so that it works with my wireless router (D-Link DI-524).
I have a long wired ethernet wire to satisfy my academic needs for the internet at the moment but my mother is not able to surf the internet and it would be more convenient for myself to put the wire back to my desktop and have my laptop browsing wirelessly.
View 1 Replies
View Related
Mar 1, 2011
This morning my Ubuntu 10.10 Meerkat desktop suddenly lost internet connection, but stayed connected to my netgear router. After the usual "tried turning it off and on again" methods didn't work, I booted into my Win Vista partition to find that connected no problem. I have another Ubuntu netbook and a Windows 7 laptop in the house as well as an Android. These all connect fine. It appears to be just the desktop Ubuntu.
I can ping my router 192.168.0.1 and log into it's UI via browser. I can also ssh to the box. My router does not do any filtering or blocking. I've tried disabling the firewall and changing the nameservers in /etc/network/interfaces and dhclient.conf as well as the network manager. The network card is a Belkin 54g but I can't remember the exact model no. it was bought years ago.
Code:
$ping www.google.com
PING www.l.google.com (74.125.230.115) 56(84) bytes of data.
^C
--- www.l.google.com ping statistics ---
30 packets transmitted, 0 received, 100% packet loss, time 29004ms
Code:
$traceroute 74.125.45.100
traceroute to 74.125.45.100 (74.125.45.100), 30 hops max, 60 byte packets
1 * * *
...continues to...
30 * * *
When I do a restart of the networking service it spits out the error:
Code:
Ignoring unknown interface wlan0=wlan0
However, as I said the wireless itself works.
/etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
iwconfig:
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"haters gonna hate" .....
View 1 Replies
View Related
Aug 2, 2011
I think something weird is going on. On a fresh installation of 11.04, I seem to be connected to my router just fine, but I can't reach the internet or anywhere else on my network. Anybody see my problem from what I've posted? The computer is only connected via wireless (so I don't know why eth0 would be connected as well). I can't think of what I'm missing...My system seems to be connected to my router on two interfaces. "ip addr" gives:
Code:
1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
[code]....
View 9 Replies
View Related
Aug 11, 2011
I dont know if its possible or not ? I'm using 3G dongle (ppp0 interface) for connecting to internet on my laptop running ubuntu 11.04 , now i want to share this 3G connection to my wireless router(Trendnet TEW-652BRP) through eth0 interface in simple my connection should be like this
INTERNET<<<3G WIRELESS MODEM<<<LAPTOP----WIRED CONNECTION TO WIRELESS ROUTER<<<OTHER DEVICES (LIKE ANDROID MOBILE/LAPTOPS SHOULD CONNECT THROUGH THIS WI-FI CONNECTION)
View 9 Replies
View Related
Sep 23, 2010
1. HP Mini 110-3000
2. 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
3. wlan0
4. cant find...
5. nothing come out...
6. *-network DISABLED
7. wlan0
8. Description:Ubuntu 10.04.1 LTS
9. 2.6.32-24-generic i686
10. * Reconfiguring network interfaces...
I cant see any access point from my router...
View 1 Replies
View Related
Oct 4, 2010
AT&T will not help. I am trying to connect with Cable (CAT5). When I try to configure my network card with YaST here is the message received. "Unable to configure the network card becasue the kernal device (eth0, wlan0) is not present. This is mostly cause by missing firmware (for wlan device) See dmesg output for details"
View 2 Replies
View Related
Feb 12, 2010
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
View 2 Replies
View Related
Sep 14, 2010
So I installed 10.4 on a new Toshiba Satellite L645DWhen I connect to my wireless at home, the Network Manager shows that I am connected but I can't reach any websites via ping or firefox. I also can't ping my router. I also don't have wired access working at all.iwconfig shows connected to correct ESSIDI can ping localhostcan't ping google:
Code:
ping: unknown host www.google.com
can't ping my router (192.168.2.1):
[code]....
View 8 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Mar 3, 2010
i have a router, i use it to connect my LAN to internet. Now, my LAN only coneck via cable, i want to try make my router to be a Acces point to routes the LAN whitch use Wireless.
View 1 Replies
View Related
Nov 22, 2010
The garage in my house is a dead spot for my current wifi router.I can't get a signal there.Moving my router within the limits of my cabling doesn't fix it. But I have two other routers I'm no longer using.Is it possible to use one of them as a wireless access point to extend the range of my current router?If so, what is the general procedure for doing that? My main router is a Verizon Actiontec M424WR. My other unused routers are a D-Link and a Netgear, both of which have wireless capability. The Netgear had a superior range, as I recall.
View 8 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Oct 27, 2010
I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
View 1 Replies
View Related
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
Sep 17, 2010
I cant connect to the internet with my wireless( or my lan for that matter, but i mainly want to use my wireless). I am going to follow the ticket provided by one of the sticky threads [URL]
1.Machine Brand and Model
Actually i am using a computer i built myself using following components
AMD Phenom II x4 965 CPU
ASRock 890FX Mobo
[Code]....
View 4 Replies
View Related
Feb 10, 2010
Running Ubuntu 9.10 Ive just got my wireless connection working after first having got the wired eth0 connection working.
With the wired connection I could SSH into my server through my firewall/router (via a forward). I can run up VNC, from there firefox, browse the web - all is well.
I have now setup the wireless connection, using a static IP, and I can likewise SSH into my server. I can run up VNC. I can ping my router. I can log onto it via VNC. I can browse to my router. But I cant browse the internet.
But I cant ping google.com. The reason is there is no host lookup service. Nslookup eventually says no servers could be reached.
So specifically, if I ping www.google.com Im told "unknown host". If I do an NSlookup on it I get timeout, no servers could be reached. However if I ping 66.102.11.104 I get responses.
I see no relevant entries in my firewall log.
Unfortunately I cant traceroute because the package isnt found - and of course I cant install it because I have no internet !
Strangely (to me at least !) if I then tunnel through SSH and browse the web, I have no problems. It works ? I know I am browsing through my SSH tunnel because whatsmyip gives the IP of my router at home, not where Ive SSHd in from. I can surf just fine.
why I cant do host lookups any more (and this did work with my wired connection, but whether its related to my change to wireless, or static IPs or both I cant be sure - it certainly appeared to happen at the same time). And, more to the point, what I need to look for/do to rectify it ?
As a bonus Id be interested in why I can SSH and browse via tunnelling but not direct from my server (via VNC). Just for interests sake !
if config reports :
wlan0 Link encap:Ethernet HWaddr 00:90:4b:27:ae:17
inet addr:192.168.1.69 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::290:4bff:fe27:ae17/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 1 Replies
View Related
Dec 6, 2010
I had been happily using a wireless connection for about two weeks. The connection then went down for a few days. Since it came back up, I can connect to the network, but cannot access the internet. Other users of the network can both connect to the network, and access the internet, though people have experienced the same problem as me the last time the network went down (they could connect to the network but not access the internet). I have tried deleting and re-starting the connection, to no avail. I have looked around the forums, but haven't found anything that can help: do any of you have any suggestions? I am malarial and at the end of tether.It is not a problem with Ipv6, which is set to ignore, as it was in the past when the connection workedI am running Ubuntu 10.10 on an X61 Thinkpad. Below is the output of iwconfig, route -n, lspci, and what happens when I ping other network
Iwconfig:
eth0 Link encap:Ethernet HWaddr 00:1d:72:9e:09:8f
UP BROADCAST MULTICAST MTU:1500 Metric:1
[code]....
View 2 Replies
View Related
May 3, 2011
I just loaded Ubuntu 11.04 onto Acer Aspire 5100 computer. I can access the internet through Firefox when I connect ethernet lan cable but it doesn't work when I use wireless connection. Although I do get the indicator in top right that says my wireless connection was established. Why I can't access internet with Firefox in wireless mode? I tried toggling the wireless switch in front of Acer but that didn't work.
View 9 Replies
View Related
