Few months ago I downloaded a Turnkey virtual appliance with Wordpress pre-installed. I used this as a VM on my laptop and configured it. Then when everything looked good, I transfered it to my hosting provider (which is the company I work for) and they put the VM on ESX and connected it to the internet.Now I'm running into the issue that sometimes quite often and sometimes not for a week or so, the VM will hang.
View 2 RepliesI've got this issue for past week.
Mysql Crashes with 111 error although it starts back up instantly.
but i can't seem to figure out why.
-Server Is Deb. Lenny + Direct Admin.
Quad Core 2.5, 8GB Ram.
-Mysql ver 5.3
-Htop shows mysql is most of the time using 33 - 50% CPU.
(the init.d name is /etc/init.d/mysqld )
-This is from the err log of last crash. code...
I'm looking for a way to put a MySQL database in a server's memory. The disks aren't fast enough to keep up with the usage and I don't feel like going for a splitted web&db server yet because of the costs.
Because this involves risks (unless there's a way to read from the memory and write to the memory AND disks?), so I'd prefer that the DB gets copied automatically every hour or so to the local disks.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
View 9 Replies View RelatedI am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
View 4 Replies View RelatedFedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.
View 3 Replies View RelatedI am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
View 8 Replies View RelatedI am new to C and linux. My code below does arbitary writes but I cant figure out where or how it does it.
I am calling the insertNode() function with seq = 'MISSISSPPI$' and alphabets = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ$'
Code:
Weird behaviour I should mention is that when I check for NULL pointer in node->child[index], the unassigned values are not null anymore, they point to arbitary memory.
we found that if we use 'top' to show the memory usage of a server (SuSe Linux 10), we can get virtual memory usage as well as 'Resident memory' usage. For virtual mem or a particular process, it is around 1.1GB, which is large but for resident memory, it only consumes 300MB. Are there anyone who knows what the differences are? I would also like to know whether the difference (1.1GB - 300MB) = 800MB are actually available for use by other applications in the system.
View 1 Replies View RelatedHow do I write a script for my Linux that can show me total memory vs used memory and have it email me results if it's over 70 percent?
View 2 Replies View RelatedI am monitoring physical memory in a server I administer, and my hardware provider told me they had increased physical memory size to 4Gb... However, using several tools (free -m; top; dmesg | grep Memory; grep MemTotal /proc/meminfo I discovered that I actually have 3Gb, not 4... But, my doubt comes from the fact that dmesg | grem Memory tells me I have 3103396k/4194304k available The first number is effectively 3Gb, but the second one, is 4! so, why I am looking at this two different numbers?
View 1 Replies View RelatedI am writing an application that wants to access periphals registers outside the standard (allowed) memory area.
Doing so gets me "segmentation fault".
I know, this is natural behaviour.
One way of getting around this is writing the module which has to be loaded by linux. I will consider this some time later.
For now, I want to come to some quick result and allow linux or gcc compiler to write to those memory areas of periphals. Is there a direct way to do so?
Is that possible that SHM shared memory is counted as cache memory on Linux with kernel 2.6.18?If find it really odd since this memory is not file backed, but I have a piece of code that loads data using shm_open+mmap, and it generates an amount of cache memory in /proc/meminfo that corresponds exactly to the amount of shared memory (I load that data from a file but I am using posix_fadvise(fd,0,0,POSIX_FADV_DONTNEED) to ensure this file is not cached and I made sure that it is working as expected). As far as I know SHM memory was not tagged as cache memory with kernel 2.6.9.If it is the case it is really unfortunate since normally cache memory can be considered to be part of the "available" memory since it can be flushed promptly but this is clearly not the case with SHM memory... Is there an easy way to get the total amount of used SHM memory on a system?
View 4 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
getting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
This is my first post in these forums. I'm still quite new to Linux (using Mint 9) so please bear with my not-very-articulate question(s)When I boot up and open up a tty terminal I get a message saying "Memory corruption detected in low memory." I've done an extensive google search about the issue and it seems not uncommon. I ran a memtest with no errors returned, so I'm sure that there's nothing really wrong with the memory; apparently it's a bug in the kernel that's causing this.
View 2 Replies View RelatedI found from command 'top' that 8GB memory are used. However, using command 'ps' with some options to grep the running processes and then summing up the memory used by the running processes are less than 2 GB. Where has the used memory gone ?
View 7 Replies View RelatedI have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.
Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.
The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.
there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.
I was having issues with MySQL Server and uninstalled it. I still have my databases at /lib/var/mysql.
My question: if I install MySQL Server (same version, 5.1) again, will it delete my databases, or will they still work?
How can I really, really remove everything related to mysql / mysql-server. I read and tried all kinds of things, but on every reinstall there is still old mysql stuff there, for example an existing password. Even resetting the password does not help.
Reason of removal: it looks like the mysql setup is really corrupt, so I want to remove, and then do a fresh install. Running Ubuntu 11.04 64-bit
sander@R540:~$ sudo apt-get purge mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mysql-server is not installed,
[Code]....
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies View RelatedMysql starting problem after changing mysqladmin password.I tried all the solutions available on forums, but not solve the problem.At last I restored the mysql db backup, this make mysql service start, but till other databases not showing all tables.
View 1 Replies View Related