I need to split big FLAC file(s) to single tracks. Is there any Ubuntu app similar to Medieval CUE Splitter? Also, I need spectrum analyzer app to determine is FLAC file real lossless or is transcoded from some lossy format. Something like this.
View 4 RepliesI am pretty new to using Linux, I am currently trying to configure 3 monitor's with Xorg in Debian Wheezy. I have 2 video cards in the PC and one has a Dell Y-splitter to connect 2 monitors. 2 monitors are 1920x1080 resolution and the other is 1280x1024.
LSPCI
Code: Select all00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
I attempted to write my own xorg.conf file, but that resulted in the machine booting to single user mode and the xorg startx error log said it could not find any devices.
When I used the xorg.conf.new generated by the "xorg -configure" command, I was able to get it to display as 3 independent screens, but there was overlap on the screens. I.E. if you moved the mouse to the right side of one monitor, it would show on the left side of another screen at the same time.
automatically generated xorg.conf:
Code: Select allSection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
[Code] ....
I would like to include BPM data in all my id3 headers. I can do this one song at a time with banshee, but I have lots of songs, and it would take a very long time. In this thread I read about bmpdj and I am attempting to install this from source. I run into problems with the make command which gives me:
Code:
Link targets:
User Interface Resources:
[uic] ui-about.h
[uic] ui-album.h
[uic] ui-beatgraph.h
[uic] ui-bpmcounter.h
[uic] ui-bpmdj-pref.h
[uic] ui-bpmmerge.h
[uic] ui-capacity.h
[uic] ui-clustering.h
[uic] ui-freq-mapping.h
[uic] ui-importing.h .....
Source Files:
make[1]: *** No rule to make target `profile-clock.o', needed by `profile-clock'. Stop.
make: *** [.source-creator] Error 2
I don't know what profile-clock.o is, or what package provides it.
I have a problem with my partitions being shrunk after VirtualBox PUEL 4.0.2 install. I tried VB OSE, loaded XP Pro and all necessary programs and realized it does not support sharing of folders. I then removed it and installed PUEL with XP Pro and all the same programs. The USB would not work in PUEL so I removed it and installed it as root to see if it would access the USB's. Halfway through the install it hung and gave me a space error.I cannot get the space back from whatever VB did. I deleted the .vdi's and all VM's and reinstalled VB PUEL to see if I could recover it. Nope. Then I tried GPARTED to try and reset whatever is reading the sizes incorrectly.sudo df -Th gives me:
paul@mobile2:/$ sudo df -Th
[sudo] password for paul:
Filesystem Type Size Used Avail Use% Mounted on
[code]....
I converted using a simple app called sound converter to convert my mp4 vids to flac (because they were music i didn't need the picture.)
Which is bad because one of the main reasons I wanted to convert is because i thought removing video reduced the file size.
For example one file went from 6.4mb mp4 to a 19.7mb flac.
Does anyone know how to use neroaacencoder (in CLI) to convert a flac file to AAC ? Is it also possible to encode in WMA in Linux ?
View 9 Replies View RelatedHow to install XMMS from source with the Flac plugin. It was originally based on howto's from blogs. I have tested this on Karmic Koala and it should work fine.
We will start off with XMMS. We'll take the plugin later..
First you need to update your packages list
Quote:
Now install build-essentials
Quote:
I have tried everything within my power and knowledge to get xmms2 to play my flac files, but I just get no sound. I've had to resort to mplayer for now for flac. For the record, yes I have the flac plugin installed along with the all-plugins package.
View 3 Replies View RelatedHow can I convert DTS files to Flac? Soundconverter and the likes won't work, so I thought of VLC but could not get it to work either.
View 9 Replies View RelatedHow do you convert a flac file to mp3? Well I have an entire album to convert actually.
View 5 Replies View RelatedI would like to know which repositories I have to add to allow k3b to rip cds into flac because even though I have installed k3b codecs, I cannot rip cds into flac.
View 2 Replies View RelatedDoes anyone have a working example of using the spectrum plugin for gstreamer?
I've searched the net high & lo and can't find anything.
Amarok will play flac files just fine, but when i try to index them into the library via "Update collection" they are not added.
All other threads i can find on this kind of thing also have Amarok not playing flac....but if i drag and drop them in, they play just fine, so i know its not a codec problem.
Is there something i have to enable? Like in some media players, you can set which formats are scanned for...but i cant seem to find such a feature available in any of the Amarok settings...
I have a whole bunch of wma files I want to convert to a more liked format like wv flac or shn. Shntool does not seem to want to do that soundconverter and soundkonverter both refuse too. My wma format is wma1 or wmal cannot tell if it is 1 the number or l the letter L.
1. They play in xine straight off. Xine is in your synaptic
2. To convert quickly install dBpoweramp under wine again quick and no fuss.
I have all my CDs in FLAC format for playback in my home but like most folks I have a portable.Now, converting my collection to Mp3 fits on my player but its a pain to manually convert each new album. It would be cool to script something that could be run on cron or manually to keep them synced.
View 2 Replies View RelatedI want to rip all my CDs to flac at the lowest compression (space is not an issue) via Banshee. I have tried a few tracks but the seem to be ripped at a higher compression to the ones I have done via sound juicer (set at compression 0)
How do I adjust the flac settings in Banshee to do this? The option to edit the settings is not available for flac? I guess there is a config file somewhere?
As K3b is the standard ripper I suppose it must be possible rip an audio cd to flac? In the plugin menu I see that the flac decoder is installed but not the encoder. Did someone already succeeded in installing the flac encoder plugin?
FYI: With virtual folders I am able to copy from the flac directory. It works to encode with flac like this but I experience the last seconds of the song are gone...
I have a flac music. How may make mp3 format?
View 3 Replies View RelatedI want to use xplot in order to plot a spectrum but when I executed the code by typing "xplot qso.fits" in terminal it returned the following error one after the other so I was force to stop the program using "Ctrl + C". (I am using Ubuntu 10.4 and I have also PGPLOT installed on my Linux).
[Code]...
I am looking for a command line command to convert ~2500 .flac files to .ogg files. All of the .flac files are in one folder and I would like to have the .ogg files put in a folder labled OGG - I would like to retain song information etc if possible.
View 3 Replies View RelatedBackground: I'm digitizing an old record. I used Sound Recorder to make FLACs of each side of the LP, and now I need to edit them down to individual tracks. I'm using the development version of Ubuntu 10.04.
Problem: Audacity ignores these FLAC files when I attempt to import or open them.
The FLAC files play if I hover the mouse over them in GNOME.
Audacity gladly imports FLAC files I ripped from CD last year (using Sound Juicer I think).
But when I try to do the same for my recorded FLAC files, nothing happens. I tried running audacity in a terminal window, and there is no additional output when I attempt the import. This comes out when I start it:
Code:
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Looking at the file properties, they're basically the same except the Juicer-generated file has values filled in for title, artist, album, year. They are all FLAC Stereo 44100 Hz. I thought it might be a file-size problem, so I made a 5-second test with Sound Recorder, and that also refuses to import.
So, why do only the ripped files work with Audacity?
Cobbling info from different sources finding this script useful and maybe hopefully useful to some of you too
1. cd to folder containing folders containing wv,flac,ape
bulk unpacking from lossless (wavpack;flac;ape)
==============================================
Code:
for i in */
do
cd "$i"
wvunpack *wv (replace this line with flac -d *.flac for flac)
[code]....
Anyway to rip the audio from an flv and convert to flac or mp3 without quality loss?
View 1 Replies View RelatedI am using 11.2, KDE 4.3.5 with Grip and Flac to rip and encode CDs. Two questions:- Have read flac -help and do not understand the -o option which is used in a few example threads. The man page suggests that -o should be used with subsequent parameters such as --output_name=FILENAME for example. In the example posts this general option is used on its own. What for?
The installation when first used, already had a string of options including --best on the command line. I cannot find any documentation for this. I assume it is a preset in the same way as for example --preset extreme in lame.
pacpl and audioKonverter appear to be missing from the Packman and OpenSuse repositories. Does anyone know of something similar that's available?
View 3 Replies View RelatedI have some downloaded files of radio programme from BBC which are .aac. I have never come across this type before. Googled it so now I am a bit wiser and VLC seems to play them without problem but they are not accepted by my upnp client devices which are happier with flac or mp3. I would prefer flac but what is the preferred conversion software.
View 3 Replies View Relatedfound this today on my travels
Code:
########################################################################
## Split Lossless Audio by Cue File
## By CokiDVD
## Contains some code from:
[code]....
I am running ubuntu 10.04 and try to get 24bit/96 Khz flacs heard with Amarok (Xine engine). Amarok after some seconds jumps to the next title -> no sound. No problems with Rhythmbox.
View 3 Replies View RelatedI am running open SuSE 11.4 and amaroK won't play, it can't even see flac files.
View 1 Replies View RelatedI use Ubuntu 10.4. I have just learned to use WinFF (near as I can tell it is a gui for ffmpeg), but it apparently does not join/seperate video files. Anybody know a video splitter/joiner? Even better, does anybody know of a program that converts video/audio formats and can split/join video files?
View 3 Replies View Related