Ubuntu Multimedia :: Change The Graphics Card In 10.04 Media Center?
Jan 6, 2011
I got it into my head to change the graphics card in my Ubuntu 10.04 media center. I removed my old ATI card and installed a new ASUS ENGT 430. I tried to uninstall the ATI drivers and associated software prior to this but obviously I didn't get it all. When I boot into X it takes me in under low graphics mode. I've tried rebuilding my xorg.conf. I've installed the driver from the ASUS site and nothing.
I decided to swap in my old ATI card and obviously I've not cleared all the ATI artifacts as the low graphics mode that machine first booted into was at the high resolution that I was running previously. I uninstalled all Nvidia software but now I'm not even able to get the old ATI software to work. Jockey sees the drivers after I install them through the Software Center but they're not really working. XBMC won't start for GL reasons.
What do I need to purge all graphics drivers and install the nVidia driver? I've got a feeling if I started from scratch I could get it to work but I seriously don't want to reinstall everything. I've worked hard to get my XBMC config just so and I don't want to lose everything
View 2 Replies
ADVERTISEMENT
Jan 31, 2010
So I've got old components from my previous computer I'd like to use to build a media center. Here's what I have:
Case
550W PSU
MSI K8NEO 4 Platinum MOBO
[code]...
View 3 Replies
View Related
Apr 20, 2011
I'm looking for some advice for setting up a media center, which will be hooked up to my flat screen TV. I think I've got most of the technical bits figured out with an Acer with 4 gigs of memory. What I need are some words of wisdom about choices for software and the like:
Is it worth the trouble to install Boxee or XMBC, or to play music and videos using VLC, etc.? I realize I won't be able to stream Netflicks without Boxee, but I haven't decided if that's a breaking point or not. Do I want to connect the computer to the TV screen directly through HDMI, or connect the computer to my receiver, which is already hooked up to the TV? I'm cheap enough to want to take advantage of the receiver, but I'm also wondering if sound quality will be better, since it's connected to my speakers and the TV just has internal speakers. Remote. Do I want to try and figure out how to use one of the several remotes that I currently own, or is it just easier to buy a computer-compatible remote?
View 1 Replies
View Related
Jan 1, 2010
I'm trying to put together a home media center from some old hardware I have. I'm looking at running something like Mythbuntu, Freevo, or Boxee. The computers accessing it would be a couple Ubuntu PCs and a Mac. I'm also wondering if there are good class-compliant (that is the term, right?) audio interfaces for multiple outputs.
What I am trying to set up is a media server to store media (mostly mp3s, some movies) that I will access over the network, which is a combination of wireless and wired. I'd like to have controls in each room for what's playing on separate speakers in different rooms, and the volume. It'd be nice to be able to output from my main desktop, also. This will take some time to put together, so I'd like to start with a good foundation. I found this comparison pretty helpful, by the way:[URL]..
View 1 Replies
View Related
Feb 11, 2010
i am using ubuntu media on a desktop for all of my multimedia needs and i just installed jaunty (alt install) on an old gateway solo laptop(266 mhz and 186mb ram) to use as my controller/remote using desktop sharing, the problem is the laptop can't keep up with the desktop and everything is all jerky (especially watching dvds). So here are the questions, what can i uninstall from the laptop to make performance better and/or is there another option short of buying a wireless keyboard/mouse (I'm poor and use what I have(besides i like having an up-close display for text and stuff)).
View 9 Replies
View Related
Feb 12, 2010
I'm trying to set up Ubuntu with Boxee and MythTV as a media centre. I'm currently stuck at displaying a picture on my TV screen. I only have an Intel onboard graphics chip, and so I bought a VGA-to-TV box to convert the signal. This is USB powered and has VGA in, S-Video, Component and VGA out. I have it connected to an external monitor by VGA and to the TV by component cable into a SCART adapter (along with a mini-jack to phono cable from the sound card).
I was hoping that the box would handle the settings for the TV screen, but all I'm seeing are flashing lines of colour, so I'm guessing I have to change the settings. Eventually, I want to get the TV to be widescreen, but I'd like it to work first! I have created an xorg.conf file and put in three extra modes.
- first, an 800x600 VGA to PAL TV converter from [URL]... - second and third, two resolutions generated by the calculator, based on the SwitchResX settings for my MacBook to connect to the same TV. Now I'm sure you want to see a whole load of settings from my machine, but sadly I don't know what settings you'll need to see.
View 1 Replies
View Related
Aug 27, 2010
I am trying to build a media center for music for me and my roommates to use. Basically I want to build a system just for playing music. Idealy (dare i mention itunes in here) I would love a computer just just booted into itunes(orsomething like it (or better) that just was for playing music.
I plan on buying a computer, like a tiny desktop (i dont want to take up a lot of room) with a huge hard drive just for holding music, and needs usb drives/cd drive for loading music onto it (or just a usb drive). Then get a small screen, not huge with a remote that does not run on wife. Also would like a keyboard on the remote if possible.
Anywho whats a good media center, and can I boot just straight into the media center? I would like support for; browse by artist, album and just song name. Also I would like to be able to make playlist within it, and it needs to be able to support a massive amount of songs.
desktop computers to use for this project and remotes that I could use? Also how would you suggest the best way to go about doing this? I would love if it booted straight into the media player. Internet is not a huge deal to me, might connect to internet once just to grab album artwork. So a media player that auto fetches artwork too would also be nice.
View 2 Replies
View Related
Oct 11, 2010
I've been looking around for the past week, but I have yet to find anything yet that provides a media center solution using Ubuntu + Xbox 360, comparable to Windows 7 + Xbox 360.
I want to drop Windows 7 completely on my media PC, and just use Ubuntu (or Linux Mint). I've tried ushare, XBMC, Moovida, and a few other apps. Either they don't support sharing, or it's difficult to configure, or it is a cheap looking solution.
Is there no way to use my Xbox 360 for a smooth media center experience, similar to how it functions as a Media Center Extender for Win7, while replacing Win7 w/ Ubuntu?
I'm even open to commercial Linux solutions, I'm just hoping to be able to drop Win7 if possible..
View 4 Replies
View Related
Jul 19, 2010
Has anyone had experience building a dedicated multimedia center? I know Its going to be ubuntu based and probably run xbmc. I've seen a pc case to use but I dont know if the remote control for it can work under ubuntu or any other distro. Has anyone had success making a remote control for an ubuntu based media center work?
View 3 Replies
View Related
Feb 25, 2011
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+
Motherboard Name Unknown
Motherboard Chipset SiS 761, AMD Hammer
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/09/07)
Display
Video Adapter ATI Radeon HD 4300/4500 Series (512 MB)
Multimedia
Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
View 1 Replies
View Related
May 23, 2010
i have geforce 8800 gts, ubuntu 10.04 when i don't install nvidia drivers movies plays great ( including HD) but programs (games,media center) does not play well at all choppy when i do install the opposite is correct movies plays choppy but all other progs plays great.
View 1 Replies
View Related
Nov 22, 2009
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
View 14 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
Nov 18, 2010
I have recently started using openshot to edit video and have found it very good. Previously I have been using Kino and openshot certainly seems more intuitive. Trouble is the more ambitious my productions the more juddery and prone to crashing the program becomes So I am thinking of an upgrade. At the moment I am using on board graphics. Or would more ram be the first thing to go for.
View 1 Replies
View Related
May 9, 2011
trying to get Ubuntu to work properly on a Del Dimension 2400. It has on board Intel Extreme graphics card. [URL] It installs and but runs slowly when the ubuntu GUI is up and running. The CPU is maxed out for quite small tasks. Selecting additional drivers gives nothing, so I guess it isn't running the graphics card in hardware acceleration - which is slowing down the system. I want to buy a graphics card to use on this Dell PC. It uses PCI expansion cards. I'm thinking of ebaying a second hand graphics card.
View 4 Replies
View Related
Jan 23, 2011
Okay first off I'm a noob with Ubuntu. I've been trying to get Warcraft 3 and WoW to run on ubuntu via Wine, so far I managed to get them installed and running but I always have problems with graphics (poor rendering as oposed to when I ran them on windows). So I figured that maybe the graphics card/driver aren't installed correctly.
On the terminal I got this information: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) I checked System > Administration > Additional Drivers When it finishes searching for drivers I get the message "No proprietary drives are in use on this system" (I have no idea what this means, I read elsewhere that I should check this) So um, I don't know If any of this is useful or necessary to fix my problem.
View 1 Replies
View Related
May 30, 2010
I have a Sapphire HD4850 X2 1G GDDR3 PCI-E graphis card, and presently I ruin a Windows 7 OS, but am moving to Ubuntu GUI Desktop, and was wandering where I could get Linux drivers for this card (and they are NOT available from the Sapphire site), or how I could get Windows drivers to work with this card, I do have 4 monitors using this card so I need the drivers and ability to use 4 monitors.
View 2 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Oct 21, 2010
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
View 1 Replies
View Related
Oct 25, 2010
I have an older Dell Inspiron 4550 w/ 2G memory and 38G HD. I believe I have GE440 graphics card. I am running 10.04, but the graphics are slower than I would like and when I tried to upgrade to 10.10, my card was not supported and I had to re-install 10.04.
- Can anyone recommend a good graphics card to choose for an upgrade for this machine?
- Is changing graphics cards pretty much the same as installing a memory chip, What is the best way to do the upgrade?
View 6 Replies
View Related
Apr 13, 2011
I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.
View 2 Replies
View Related
Jul 12, 2011
I have a lenovo ideapad z570 with intel i5 2nd gen 2410m processor and intel integrated graphics. In lshw, my graphics are shown as: "2nd Generation Core Processor Family Integrated Graphics Controller"
Code:
glxinfo| grep render
returns:
Code:
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile GEM 20100330 DEVELOPMENT x86/MMX/SSE2
Compiz works fine, so do some 2D games. However, performance is choppy on most other games(2D and 3D).
Are these graphics fully supported by Ubuntu yet? If not, does any other linux flavour have support for this?
View 1 Replies
View Related
Jun 2, 2011
I run Kubuntu 11.04 and I have a C-Media CM8738 sound card. My problem is, my card won't record from the line-in jack, even when I set it to capture in alsamixer. Furthermore, the mic jack only records when both the line-in and the mic are set to capture in alsamixer. I'm using the same settings I used in 10.04, and the line-in captured fine then.
View 6 Replies
View Related
Oct 12, 2010
Just fitted an Inno3D (I-7300LE-G4E3) graphics card and I get a distorted boot up screen, a virtually unreadble boot menu (lots of extra white bits all over the screen) and when the system is booting the black screen with "booting from .." and the underscore at the end, is covered with white commas (?!), then the login screen pops up for a fraction of a second, then get a blank screen and no signal-cant get anything after this (or from the vga port on the pc)-I ve tried logging in even though I cant see anything, but no music , nothing.
Thought I might have to download drievers AFTER I d installed it, but as I had this problem, I removed it and tried to download driers before installation. Not sure which of the 4 to try, but tried 2 and neither works-GDebi is offered as an app to open them but nothing happens, nothing happens if I just click on them and when I try and install them from a terminal with the script from the nVidia site, it says unable to open them.
View 3 Replies
View Related
Jan 3, 2011
I'm building a new Ubuntu system for use as a desktop machine and personal server (http, smb, smtp). It'll be based on an Intel i7 950 and a Gigabyte X58A-UD3R LGA 1366 ATX Motherboard.
I'm looking for recommendations for a graphics card that will support dual monitors and runs well under Ubuntu. Would like some decent 3D support.
View 3 Replies
View Related
Feb 4, 2011
Just tried and failed miserably to get an Nvidia 6200 based graphics card to play nice with my machine.After putting my ATI Radeon 9200 back in the box, my emulators have gone all kinds of strange.
ZSNES will crash as soon as I attempt to load a game full screen and will leave the screen resolution at the resolution ZSNES was running in (800 x 600, for example.GENS again will alter the screen resolution to whatever it was running in when the emulator is minimised. I'm running 10.10 with 1gb Ram, 128mb ATI Radeon card, P4 3ghz. Was all fine until I tried the new card and I did a fresh install only last week .
View 2 Replies
View Related
Mar 11, 2011
i have an ati radeon x1550 (pretty old, i know) graphics card which worked perfectly under windows 7. i recently read that ati appears to have dropped support for this card installed on recent ubuntu distributions (i'm using ubuntu 10.10 + kde 4.6.1) the thing is, when i'm watching something on videos or playing a movie through vlc, the image looks jittery (random horizontal lines that break the image, it's pretty subtle but it's there...) i'm new to ubuntu (switched from windows 7 a couple of months ago) and what i'm looking for is one of two:
-either a solution to my drivers problem so i can use this card with full 2d and 3d support (like i used to in windows) or, a recommendation of which graphic card i should switch to (my motherboard has a 'pci express x16' slot). i've searched countless forums and sites but i can't reach a final conclusion: am i supposed to have good 2d and 3d acceleration with this card (with the right drivers installed)?
if the answer is 'no', then i'd like to know what i should buy. for what i've read, apparently i should stay away from ati and intel and look for nvidia. i'm not a gamer so i really don't need an incredible 3d acceleration (although some would be nice, just in case) what i really need is for my system to be snappy (i work with my computer) and most of all good support for multimedia apps (i would like to be able to use xbmc smoothly for instance) i'd like to know which is the cheapest graphics card that i can get that will meet my needs (the ones i just listed above)
View 5 Replies
View Related
Mar 16, 2011
I am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn]
Subdevices: 8/8
Subdevice #0: subdevice #0
[code]...
View 1 Replies
View Related
Apr 29, 2011
After I've installed an ASUS graphics card (ATI chip) my Ubuntu got no sound at all. My Codec is: VIA VT1708B 8-Ch. I've chosen "Internal Audio Analog Stereo" in Sound Preferences. Windows on the same machine works properly.
View 3 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
