Ubuntu Multimedia :: Using Flip Video In VLC Media Player ?
Nov 12, 2010
I'm trying to play videos from my flip ultrahd recorder and it's plays the audio fine but the video skips. It shows the video for a second then stops for 2 or 3 seconds and shows the video for 1 second and so on and so forth. Like the video is lagging or something. Anyone familiar with this problem. I also have dragonplayer and pitivi that I'll try also.
in software.opensuse.org site if we serch for a software the result will be like the following
vlc KDE:Unstablelayground/openSUSE_11.4_KDE_Distro_Factory This is the stripped version of the VLC media Player. VLC media player is a highly portable multimedia player for various audio and video
[more] 1-Click Install Manual Package Download Go to OBS Project i586 vlc-1.1.6.99-1.11.i586.rpm src vlc-1.1.6.99-1.11.src.rpm x86_64 vlc-1.1.6.99-1.11.x86_64.rpm
if i like to keep the setup(rpm) of the software which i should chose the above?
I was setting up my Totem Movie Player on Ubuntu 9.10 and at first it wouldn't play dvds at all. So, I went online and entered these two commands into the terminal to play restricted dvds.
DVDs will now play on Totem, but now I don't have any video. I can hear sound and if click around the screen I can get it to play but I still don't have any video. I also tried both dvd drives on my computer and tried different DVDs. Still same thing.
After seeing how good netflix movies looked over a wireless connection I decided to pull out an old desktop to see if I could up a basic media player . I loaded Ubuntu 10.4 and was impressed how fast and clean the computer ran. I also downloaded the latest version of boxee. I was disappointed with the quality of video; video was not very sharp, there were square blocks(pixelated) in dark areas of the picture. At this point I am trying to decide if the poor quality is due to my video card, boxee, CPU or if I am expecting too much from web content. should I just a browser or VLC. Naturally I would like to spend little money and use what I have. If however my hardware is not salvageable for what I want to use it for, I would like to know. Any opinions?
My camera was mounted upside down on a drive today and I need to flip all frames in 3 clips...what software can I use to do this quickly and efficiently?
Ubuntu10.10.i want a media player with all media codecs.it should able to play all formats of videos and audios so please suggest me a media player.(i used km player in windows i want a media player like that)
Crystal Player has one very good playback speed troubleshooting feature - it uses large buffer of decoded frames (about 50% of RAM). Is there any player with such features in ubuntu?
When playing coyright protected DVD's in Ubuntu 10.10: the following errors occur:Movie Player Error message:Error occured Could not read from resourceVLC media Player Error essage:Playback failure:DVDRead could not read block 0.Non copyright protected DVD's play fine
Recently I decided to leave Windows and go with Linux. To try out I downloaded Ubuntu 10.10 and I can't be happier. I'm still getting used to how things work around here. Anyway I have an account at a website where I watch free TV, thing is the website uses Windows Media Player to stream the TV channels. I downloaded a bunch of plug-ins like VLC player, MPlayer and some other but all I get is the sound from the channels, no video other than some stupid graphics like when you play a song in Windows Media Player. So I wanted to ask you guys if you can help a brother out and please be as detailed as possible as to what to do because I'm still getting used to working in this environment.
I have a problem with VLC media player. I just reinstall it and when I try to run any movie the sound is working well but there is no video. I already tried every video codecs in the settings but with the same result. I also tried to start first VLC and select the video but that does not change anything.
i just installed ubuntu, latest version. i accepted the default media player. when i had windows installed, i was able to play videos at any level without any problems. the video player played very smooth whether it was in ..... or any other site. i took windows off, installed ubuntu, and now, the video is extremely choppy. the audio is fine, but the video is like it is playing 1 frame a second, instead of 30 frames a second. is there a better media player than the default? is there a setting i can adjust, like a buffer or something? i think the default is rhythmbox music player? for the video.
I am using Lucid lynx and trying to play a video files with 300++ megs on it but only shows 21 seconds.. and a writing in the screen Codec Error : Use windows media player
I can play all files and already download the ubuntu restriced format .. But why can't i play this one ? Really liked the movie tough ..
All the three files I downloaded can not been played by Banshee. I got the message like below when I use search the code, so I installed all the Gstreamer I can find.
* Windows Media decoder (GStreamer, 32 bit, i586) * Advanced Streaming Format (ASF) demuxer (GStreamer, 32 bit, i586)
During that I also did some update, but the problem still the same.
I've been away from Linux for a while, so I need to get informed about some of the 32- vs. 64-bit issues concerning video players and codecs. So, what is everyone using these days?
More specifically, is it possible to play, e.g., .wmv files with 64-bit Kaffeine (my favorite player) or any other 64-bit video player? If so, then which combination of player and codec should I use?
Since I can't get LinuxMCE diskless mds to work I am going to try and use another approach. What I want to do is be able to store media (pics, audio, ripped dvds) on a central server and access the across the network with a media player in Ubuntu or Kubuntu that I can connect to the TV and entertainment system.
What media player to use and how I should set that up? I might use windows server for the shares just because I am used to it unless theres a better way. I have a pretty beefy server just waiting for media files.
I have just upgraded my ubuntu dist from 9.10 to 10.04 via the Update Manager inside gnome. I spend a lot of my spare time lying in bed watching (legal) movies using VLC Media Player. I have never before the dist upgrade had any issues with this although since the upgrade I have found the VIDEO in the movie crashes usually around halfway through the movie although the audio remains fine and continues through to the end of the movie.
I am trying to stream a live dvb feed to windows media player on a number of desktops. I have VLC and all the codecs etc installed.
I am starting my stream with the following command:
Code:
After vlc loads, I get the following error:
Code:
It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG Audio layer 1/2/3.
If you don't know how to fix this, ask for support from your distribution.
This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. After some searching around, I found a guide on setting up ffmpeg at [url] which I have followed. I am still getting the error.
Do I need to add any other codecs to make this work?
Unfortunately, being the fact that I'm a gamer; I need to dual boot with Windows 7. I'm after a nice music player with a similar GUI to Banshee or Rhythmbox in their minimalism. Something as Gnome looking as possible and very lightweight on recources.
Okay running on 64bit karmic 9.10 i have been trying to get this .ts file to play nicely on vlc, but no success of getting it work nicely what so ever. It actually starts under VLC and gives image and sound but not the way i would prefer it. I don't quite get it but when i start it with vlc it actually displays it with lower resolution this is HD file, as its a stream capture from tv but it outputs it with much smaller resolution about 320 x 180. Tried it with other players too but the only one that accepted it nicely was xine "but problems ahead again" it outputs no sound? the image though was and is what it should be.
Tried it with Totem too and it did accept it too actually "hurray! but with the same symptoms as VLC + it doesn't output any sound out from the file only the image is what gets generated out from the player. I ran VLC from the terminal and it outputs following data when i start to play the file:
[Code]...
so if any ONE knows what should i do, feel free to step up and advise me would be appreciated (thanks in advance) If this has value if's mpeg2 ts file. And no...the file ain't corrupted that much i know, but what could generate this problem. If it ain't broken? Seeking works nice etc... except the low resolution display.
I have a file server running Ubuntu Server. No monitor or input hooked up...I just ssh into it for maintanance. I use it to store all of my music and video files. I was watching Hulu at work today and thought it would be nice if I could somehow stream or play my files from my file server while I was at work.
I have apache set up so I can serve websites from it so I was thinking if I could some how select the file to play and it play it in an embedded player, that would be fine. I'd like it to play music and videos.
Is there any way of going about this? I have minimal HTML experience, but I have extensive C/C++ experience and server experience. So I'm comfortable using some open source libraries to accomplish this.
I'm using the default Totem movie player to play all my mp3s. However, because I listen to a lot of podcasts(some over an hour in length), I'm looking for some kind of media player that makes it easy to navigate through long audio files. For example Winamp has global hotkeys that allow you to jump forward or backward by 30 seconds (something like that).
I am running Ubuntu latest revision, but for the last 2 revs I have had the same problem. I have tried removing and uninstalling all media players, codecs and everything with no luck yet. When I play an AVI it brings up a window saying I need the divx or mpeg-4 codec. Click here to download. When I click it, it tells me it can't find the required drivers. The audio plays but no video. I have installed the codecs from what I can tell. I have seen errors for DivX MPEG-4 Version 5, X-VID MPEG-4, and H.264.
Just spent the last 4 or so hours trying to get my Ubuntu 10.04 Netbook edition system to play streaming audio from this link: [url]
I have managed to download the relevant M Player, but when I click on the streaming audio link it pulls up the player, then nothing happens. It says "stopped" and when I click on the play icon nothing happens.
When I cut and paste the relevant link into M Player directly it looks as it it will work, it seems to buffer for about a second, then nothing happens again.
I have installed "Ubuntu Restricted Extras" and the "Medibuntu" repo is enabled. If this remains a codec issue (which it feels like) how do I find what codec I'm missing?
The three directions media player has anyone used it I can't install it,who haved installed,please make a .deb package and give it to me (koreagrace@163.com).
VLC Media player has been giving me a few problems and I'm hoping someone here has a fix for this issue.Yesterday I was playing an avi file and my browser, that was also running, froze up in the background. At the same time my video became choppy and started to freeze. I shut down firefox and vlc but when I opened it back up all of my avi files where greyed out. I've posted a request for help on the vlc forums but no one has responded. Has anyone else experienced this problem? It's frustrating because my vlc player will still play dvd's but it won't play any avi files. Oh and I tried the drag and drop option per a suggestion but all I get is sound with no video. Lastly, I should mention that I'm a multi tasker and was also trouble shooting a problem I was having with amarok, which I've since uninstalled. Could amarok have some how screwed up my files? I've even uninstalled an reinstalled vlc but nothing works
I am trying to set my default media player as MPlayer and selecting it with a right click in the menu, open with and then telling it to open with every time. It then opens it in MPlayer that time no problem but then next time I just double click on the file (or any file with same type) it just opens it with the original default player. I've tried using SMplayer as well as default and it does the same thing. I'm on Ubuntu 10.04.