I can't seem to get my microphone working. I've gone into Sound preferences in Sound Recorder and there aren't any options for sound input, only the one sound output option "Internal Audio"
I'm using the Input and Output jacks on the motherboard.
Anyone know what I can do to get this working?
I've been using Ubuntu for a few weeks, I'm trying to switch.
I am running Ubuntu Studio 9.10 and have been using wineasio to connect Reaper to JACK successfully for a while now. However, I am now experimenting with using multiple soundcards in JACK (via alsa_in). My main card is an M-audio delta 44 (4 inputs) and I want to route the inputs from my onboard soundcard into Reaper using JACK. No problem so far.. This all works with alsa_in. But the problem is I can't get reaper to start with more than 4 in/out.
With wineasio, there is an environment variable "ASIO_INPUTS=" and "ASIO_OUTPUTS=" which allows you to set the number of in/out... Which I already used to bump it up to 4 when the default was 2. But when I try to set the inputs to 8, for example, Reaper still only recognizes that there are 4 inputs in its configuration.
The problem here is I need more than 4 separate input tracks going into Reaper simultaneously. It would also be nice to just have some "virtual" in/out ports to route things around in more ways. Another option I have considered is the "Rearoute" drivers in Reaper, however I'm not sure if that will play well with JACK. I'll have to test it tonight and see. I guess if it doesn't connect to JACK, it may be theoretically possible to run JACK simultaneously with the Rearoute driver with Reaper, and then actually use alsa_in on the same card to bridge it to JACK (in addition to using alsa_in for the onboard soundcard inputs as well)... But if this even works, I'm not sure if the latency will be worse ...
Does anybody have any insights on this? Am I doing something wrong or overlooking something? Is this just a limitation of wine or wineasio that it cannot assign more inputs than the primary sound card physically has? Would "virtual ports" help me at all in this endeavor?
I'm using an IOGEAR KVM Switch to switch between my newly built PC and Xbox 360. I've been using it for a while on my 360 with no problems, but to switch inputs you have to use a hotkey on a keyboard that is connected to the KVM switch (there is no button on the KVM switch to toggle between inputs). My KVM switch is compatible with Linux, but each time I plug in my Logitech Wired Wave keyboard into my KVM switch and use the hotkey it fails to switch the input. The hotkey is the Scroll Lock key on the keyboard, and the Logitech Wired Wave keyboard doesn't have a key dedicated to that function.
So I use the key combo for Scroll Lock, which is Fn + Pause/Break. I haven't mapped out all the keys on this keyboard yet, but I figured it should already be mapped out, since all the other basic keyboard keys are working. I managed to switch the toggle key from tapping the Scroll Lock key (combo) twice to tapping the Control key twice, after finally figuring out the manual's long and convoluted key combinations to change the input toggle key setting. If anyone else encounters this problem I would direct you to the Page 11 of the product manual, which is available at the product page linked to above.
i should start by saying i'm using ArtistX OS, (based on Ubuntu Karmic (9.10)) I have a cassette deck and a usb turntable that i want to use to digitize my old stuf. at first, there was no output from either device, but after much fiddelin', when i right click on the volume icon and hit sound preferences, input tab, i can see that there is now incoming signal from both devices, but no audio rendering. also, again after much try this or that, got audacity to record and playback (audibly, but i could still not hear it durring recording), but that which was rendered was not acceptable quality for archiving i havn't a clue what to try now
View 1 Replies View RelatedWith pulseaudio handling sound on Lucid (10.04), when I plug in my USB headset it's recognized, but there was no easy way to have it be used without going to System > Preferences > Sound > Input & Output and checking the radio buttons. Then if it's unplugged, and plugged in again later, the setting has been lost, so it was back through the menus. Not good when the headset's not plugged in and I'm fumbling to answer a Skype call. What would be ideal is if pulseaudio could prioritize and always default to the headset when it's plugged in. But I'm told by one of the pulseaudio gods (Col) that it can't yet.Here's a way to at least get the switch down to one button on the panel bar.0. Get all your devices plugged in1. Find your outputs (speakers, headphones):Quote:pacmd list-sinks | grep alsa_output2. Find your inputs (such as a microphone):Quote:pacmd list-sources | grep alsa_input3. Write a bash file to choose one or both, like this but with device names appropriate to your system which you've discovered above for the alsa_output.* and alsa_input.* strings.Quote:
#! /bin/bash
pacmd set-default-sink alsa_output.usb-Generic_FREETALK_Everyman_0000000001-00-Everyman.analog-stereo
pacmd set-default-source alsa_input.usb-Generic_FREETALK_Everyman_0000000001-00-Everyman.analog-stereo
[code]....
Do you know any dvd playback app that can recognize inputs from a remote control (like play, pause e.t.c) and at the same time when I launch it to check the dvd rom and resume playback from last time. I used vlc but it does not seem that works like the way I do.
View 3 Replies View RelatedWhen i boot and GRUB loads there are too many options for ubuntu.There are like 7 different ububt options(i think it's for different kernels) and last the windows partition.Is it possible to get rid of some of the old kernel options
View 5 Replies View RelatedI installed Ubuntu with the netboot. I only installed the packages I needed. Concerning X, I installed xdm as login manager and fluxbox as window manager. All is working fine except that whatever I type under X (under xdm or, after logging in, under fluxbox) appears in tty1! The keyboard inputs appear under X and under tty1 (so usually after "login:", or hidden after "password:").
Let me provide you with more details. Starting from xdm, I cannot access to the other ttys. "ctrl+alt+F[1-6]" do not work. Actually, this is not entirely true: after I type "ctrl+alt+F2", all my keyboard inputs under X will be appear in tty2 (and not anymore in tty1). I can see that from /var/log/auth.log which has a lot of lines like this:
Quote:
May 13 10:15:45 data login[2182]: pam_unix(login:auth): check pass; user unknown
May 13 10:15:45 data login[2182]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty1 ruser= rhost=
May 13 10:15:48 data login[2182]: FAILED LOGIN (2) on '/dev/tty1' FOR 'UNKNOWN', Authentication failure
These errors are due to the fact that tty1 receives a wrong login (something I typed under X, before pressing RET). BTW: If I connect to xdm using my password (instead of my passphrase, thanks to pam_ssh), then I login into tty1 at the same time.
I checked that X is running under tty7. "ck-list-sessions" returns:
Quote:
Session1:
(...)
x11-display = ':0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
(...)
Under X, if I type "ctrl+alt+F7" and "RET", then X crashes and it is launched again. After this, all is working fine: the tty[1-6] can be accessed and the keyboard inputs do not go anymore to them when I am under X.
I face the same problem on two different computers (a desktop computer and a laptop). Notice that I face the problem even with pam_ssh not installed (I mentioned pam_ssh earlier).
He doesn't do anything except emails, Internet search and sort pictures and I don't think he or his wife do anything I haven't shown them. The computer is an older model but I'm unsure of the brand, the motherboard is Intel entry server S845WD1-E. Recently his mouse stopped working, then his keyboard. I am going to try a ps2 card (the ps2 is internal to board). We are unable to use a usb mouse or keyboard. I have installed a new usb card but that did not work. I've tried different memory but have not run memck on it with another computer. After trying several suggestion from various support sites, including Intel, I finally cleared CMOS, removing the battery and then reset jumpers. Now I can enter Setup, but of course can't use the keyboard to change the settings in BIOS. I want to load CD-ROM first, but can't access via keyboard to change. I suspect the motherboard is going out, but still have hope. This couple is elderly and fixed income so I'm trying to milk it for all I can. I can use his HD on my system just fine.
View 1 Replies View Relatedhow to change the value of the inputs in sed while looping
As such:
for i in `seq 1 10`; do
"do something funny, using OpenFOAM"
cd system
sed 's/oldvalue/oldValue+increment/' -i sampleDict
cd ..
done
So basically, can you for instance create a constant "a" and increase it for every loop interval and use it for sed?
I am running Ubuntu 9.10 on an Acer Aspire 5920 laptop. For the most part it works well, but it seems to occasionally become mostly unresponsive (~1 / 2days). I say mostly unresponsive because I can still move the mouse, but I do not seem to be able to click on anything (either to open or close programs or windows, or interact with menus). The keyboard is also partially responsive. When I use my keyboard shortcut to get access to the Applications menu, the menu highlights and depresses as though it is opening, but nothing appears on the screen. I can eventually press Ctrl+Alt+Del to start the shutdown procedure (and the shutdown screen pops up with the 60s countdown).
But I cannot use either the keyboard or the mouse to select another option (Restart, Suspend, Hibernate, or even Cancel), nor can I select the Shutdown option to cause it to shutdown right away - I just have to wait the sixty seconds for everything to turn off. This seems to happen no matter what I am doing with no warning - browsing the web, playing a game, or working on a document. The only consistent thing is it only seems to happen when I have more than one program open and I am trying to switch between open windows.
I upgraded from 9.10 to 10.04 LTS last week (32 bit, gnome desktop, no desktop effects). The system was quite stable before the upgrade (it's usually on 24/7 with uptimes in the dozens of days), but ever since updating to 10.04, the system loses all mouse and keyboard input at random times.
I can still ssh into the system fine and reboot it in an orderly fashion from a laptop, but I'd rather that it wouldn't freeze like this in the first place
I've tried service gdm start / stop from an ssh session to see if it's an xorg-related problem, but sadly that did not help in recovering mouse / keyboard input.
I also tried unplugging and re-plugging the ps/2 keyboard and the usb mouse, but sadly that also didn't help.
I don't see any weird messages in dmesg, so it's not a kernel oops either it seems.
I'm using the proprietary nvidia driver if that matters.
both audio inputs (I use the integrated mic on my notebook) and jack-sense (integrated speakers/headphones) work properly, as they should. But after some time (from few minutes up to several hours) both of them cease to work simultaneously. After that the mic input levels turning gray and speakers don't work at all (when headphones were connected at that moment) or speakers don't mute when I connect my headphones (if headphones were not connected then). After I reboot, everything is okay again for some time, but then it happens again. Setting mixer levels manually with alsamixer doesn't help at all. I also tried different snd-hda-intel model settings in alsa.conf, but that just made things messed up, so I stayed with auto setting. This way everything (inputs/outputs/sense) works as should until it simply stops working.
It's maverick, ALC268, ATI Azalia (Intel HDA), alsa 1.0.23, but I had this problem with karmic and lucid as well when I tried them. Now I want to switch from Win7, but this is the only thing keeping me from it.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View RelatedI recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!
Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
