usually I use a Xinerama setup with 3 monitors. But for playing nexuiz (a free egoshooter) I switch to a single monitor. Therefore I have a second xorg.conf called xorg.conf.1Monitor and start nexuiz with this little script:
[Code]...
Do I need to start something additionally? Some soundserver or whatever? Or what might be the problem? Here my xorg.conf.1Monitor
[Code]....
I have finally ripped my dvd collection to my external hard drive, and now I want to make fair use back ups of my discs (incase the worst happens and I lose my HD and my original disc) I remember there was a tutorial on these forums a while back but I can't seem to find it.
View 1 Replies View RelatedGuetting radio streams to work in ubuntu stand alone players wasnt so difficult after all: I just had too see the page source and locate the streaming address. That way I added some radios I was interested to rhythmbox. I also found websites that list lots of streaming addresses for Europe, Japan.TV seems to be different: so far I havent been able to do the same: Ideally, I could search for a streaming tv address in the source of the page with the embedded player, but no luck at all.
Im not talking about tv via a tvturner card, just tv streamings, like the BBC or this german one URL... type=null. The public german broadcaster allows me to watch their programms in their embedded player. Can I watch those programms in vlc or in other standalone players? Im also interested in the same for the bbc, cnn, aljazeera...
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I did a basic U9.10 server install of postfix with the minimal config. Added a test user and things worked after a few minutes. I now want to setup a few new things and want to switch to use mysql as the back-end. I have mysql installed, setup postfix.admin which in turn setup the database/tables. Now when I logged in to that admin, the original test user is not there (which is fine), but I created the test domain again, created a user and an outside test failed saying user unknown.
Now I looked through the main.cf page and don't see anything obvious to say hey, put backend is mysql, here is the info. I then noticed via apt that postfix-mysql was not installed, so installed that, I see my .cf was backed up, but still don't see anywhere to connect the 2. So currently mail is still accepted from the test1 user running local. I don't mind wiping everyhing, but is there a simple place to just make a change or 2?
i want to remove the raid 1 arrays on our server centos and use standalone drive
View 3 Replies View RelatedI'm looking for a purely standalone TFTP server that does not make use of inetd, can be run by non-root users (at non-root port numbers, of course), and if run as root, can do chroot and switch to a non-root user to shed root privileges.
View 3 Replies View Relatedventuring into unfamiliar territory so I'm hoping someone can help me and make things a little more understandable for me. I have setup Postfix on a standalone server connected directly to the internet. I have got inbound and outbound email working for the most part, but I am worried about security.My fear is that if I leave port 25 open to the outside world spammers will find this and start relaying mail through it and eventually blacklisting the IP attached to this box.
For now, I am hosting mail for a single domain and single user (me) with a few aliases. I plan on expanding to IMAP and SMTP access from the outside at some point, but for now I've been using Mutt in a shell and it's fine for my needs for now.
Here are my current Postfix settings:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]....
I hear no sound with pulseaudio, but I hear the "ready for login" sound after the x server starts. OS: Ubuntu x86 10.04
[Code]....
I just started to play with ssh so I connected to my media-pc with ssh from my laptop. I was always able to start a music player and play the music on the media-pc. Since yesterday the sound is gone. When I do top on the mediapc, I see my player running.
When I open my player locally on the mediapc, I can hear the music.
I think the sound disappeared after a update, but maybe it disappeared because I opened a player locally (on the mediapc) I don't know.
The laptop and mediapc both use a fully updated 9.10
update: when I connect from mediapc to laptop, I can play music on my laptop
One of my friends happens to be a Mac user. When he plays music in iTunes on his Mac Book, he can select that the sound should be played from the laptop speakers or from his remote speakers (i.e. his hifi stereo connected to an Airport Extreme wifi access point). If he chooses to play using the remote speakers, iTunes will stream sound via wifi to the Airport Extreme, which will then output to the hifi stereo speakers.
can I do something similar with Ubuntu/Kubuntu?
I have a setup like this: * I have three laptops running Kubuntu 10.04, Ubuntu 10.04 and Ubuntu Netbook Edition 10.04. * I have a server (fit-PC) running Debian Lenny connected All machines are connected to my local wifi network. The server is connected to some good speakers.
So, what do I need to install/set up on the server and the clients in order to have, say, mplayer, stream sound to the server which will then output it through its sound card?
I've been trying for a day to get sounds working on my HTPC which is running Ubuntu Server (Natty) and XBMC from the repositories. I have so far had no luck, with not so much as a peep on any channel - analog, optical or over HDMI.
My setup is a ASUS AT3IONT-I with an Intel Atom CPU. I think this is a common configuration which should not require any special treatment, and I also have a friend with the same hardware and no problems running XBMC on OpenSUSE.
XBMC is installed according to the instructions here [URL] with a user named xbmc etc. It works wonderfully in every aspect except that the sound is missing alltogether.
I've been following [URL] for troubleshooting but have now run out of ideas, which is why I'm asking you.
Code:
aplay -l
gives me
Code:
**** List of PLAYBACK Hardware Devices ****
[Code]....
I tried filling in with all the details I could think of, but if you wish to know something more I'll be glad to provide it.
I have configured PulseAudio with an MPD system-wide as I want to run PulseAudio without an X-Window Server environment, as I'm going to let my netbook act as a "wireless speaker" for espeak to speak out; thus, minimizing the expense of getting a "whole-apartment audio equipment." This is something that I can figure this out, as I have configured PulseAudio to act as a sender by having a separate RTP stream when I configure it in a VNC client.
Plus, I want my Windows Vista 64-Bit machine to receive the output from PulseAudio. I did download the Windows version of PulseAudio from Cendio, but I have problems getting PulseAudio to work, even if I added load-module module-rtp-recv to default.pa in the PulseAudio directory that I installed in PulseAudio directory. I get error after error messages when I run pulseaudio.exe, so it looks to me that it's not going to work anyway.
So I deleted the entire PulseAudio directory. It said something about entropy that I did not know anything about it. So anyway, is there some sort of a server program that listens to PulseAudio output and then send that audio to the client? The server program in the Ubuntu Server (that I plan to use as a sender) must be able to run without an X-Window environment. Is this possible?
I tried to do a search when it comes to streaming audio from Linux to Windows, but the Google search result came up with "Streaming audio/sound from Windows to Linux" which did not turn out very well for me. As a result, I have no luck with doing a Google search for what I'm looking for. In short, is there some kind of daemon that listens for audio and distribute the sound to Windows? It will be for my internal network only.
I debate whether to place this under Server or under Multimedia, because it's both. I have Server 10.04 installed on a Foxconn Intel Atom board. For one of it's duties, I hope to set it up as a jukebox with Subsonic. I plugged in a pair of headphones and set about testing. Long story short, I have no audio from them, although I can get a light hiss when using sound-test. (I will have no GUI on this machine. Everything will be done through terminal or through a browser.)
Using lspci, I have this: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
Using aplay -l, I have this:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
[Code]...
I can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
I'm using pulse audio sound server in opnsuse 11.3 and latest version of flash player, The problem is playing video or sound with flash player in firefox, Once I play something in firefox sound output it seem like closed to other applications like amarok.
View 3 Replies View RelatedI need a standalone calendar application for ubuntu lucid. I used Sunbird under karmic and LOVED it and the add-ons I could use with it (automatic export of calendars, among other things) but it's been discontinued. I don't want to use Lightning, because I want a standalone program that won't have too many dependencies. Chandler has also been discontinued, so that's not an option.
EDIT: Evolution doesn't work for me because I can't use it without an email address. Since I don't use my email through that package, that restriction makes the program useless to me.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote: