Ubuntu Multimedia :: No Sound After Crash
May 3, 2010
So everything was working great in Lucid until my system crashed about 10 minutes ago. After booting it back up I have no sound anymore. I've got a Soundblaster Audigy that's been working in Ubuntu for years now.
Pulseaudio and Alsamixer are set how they should be (every volume meter around 80 and nothing muted).
aplay -l provides:
**** List of PLAYBACK Hardware Devices ****
card 0: CA0106 [CA0106], device 0: ca0106 [CA0106]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CA0106 [CA0106], device 1: ca0106 [CA0106]
[Code].....
I even tried some unorthodox ideas such as completely shutting down via shutdown -h now. I tried killing and restarting the pulseaudio daemon.
View 2 Replies
ADVERTISEMENT
Dec 21, 2009
Sound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.
It seems that Fedora 12 has sever problems with Intel Sound cards.
I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.
Here follows the logs containing the crash info.
WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1
BUG?
[Code]....
View 2 Replies
View Related
Dec 26, 2015
Jessie 8.2
Cinnamon 2.2.16
Sound settings crash when accessed from cinnamon-settings menu:
Code: Select all$ cinnamon-settings
Could not find bluetooth module; is the cinnamon-control-center package installed?
__init__ took 79.102 ms
(cinnamon-settings.py:3856): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] .....
Segmentation fault
Here is the output when trying to open 'Sound' directly:
Code: Select all$ cinnamon-settings sound
Unknown module sound, using cinnamon-control-center
Could not find bluetooth module; is the cinnamon-control-center package installed?
(cinnamon-settings.py:3877): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] ....
Segmentation fault
I've never been able to get bluetooth working. Installed version is:
Gnome-bluetooth (3.14.0-2)
View 2 Replies
View Related
May 23, 2011
Using Debian stable. 64-Bit. I can play videos and music using Totem and VLC. And I can play audio files with audacious and Rhythmbox. And I can play flash in firefox and google-chrome. But, if I open audacious and then play a flash file in Firefox or google-chrome audacious crashes as well as other multimedia players that I have open such as Totem, VLC and/or Ryhthmbox.
Would like to know if you can offer some troubleshooting steps to take so that I can play a flash file in a browser and still play an mp3 file in the audio player without having to kill those processes and restart.
View 7 Replies
View Related
Feb 17, 2010
firefox almost always crashes when a flash video plays except when firefox is
started in terminal, in this case flash becomes slow and the following message appears in terminal:
(firefox:1692): Gdk-WARNING **: XID collision, trouble ahead
i' ve tried some solutions like reinstalling firefox full package and flash player but the problem persists.
system
proccessor: AMD Duron 700 Mhz on QDI Kinetiz 7T (kind of old and slow!!!)
memory: 768 MB
graphics: Ati radeon X1600 (64 MB RAM i think)
sound: Creative SB Live! EMU10K1
View 2 Replies
View Related
Apr 18, 2010
I'm running Jaunty, and I'm trying to play a film that is .mkv format through VLC. Everytime I try to play it, the screen either freezes up completely, or it sends me to the login screen. It's only with this one film, though. I have a number of other films in this format, and they all work perfectly.I'm a bit of a newb, so I'm not entirely sure where I would find out what went wrong
View 1 Replies
View Related
May 7, 2010
I installed 10.04 from scratch over 9.04 ,keeping /Home. Tvtime no longer works.I unistalled it completly and installed again ,with no results.
View 9 Replies
View Related
May 14, 2010
I have just upgraded my ubuntu dist from 9.10 to 10.04 via the Update Manager inside gnome. I spend a lot of my spare time lying in bed watching (legal) movies using VLC Media Player. I have never before the dist upgrade had any issues with this although since the upgrade I have found the VIDEO in the movie crashes usually around halfway through the movie although the audio remains fine and continues through to the end of the movie.
View 2 Replies
View Related
Feb 11, 2011
last 2 or 3 days my flash always crash at Chromium how to fix this?
i use adobe flash player 10.2 r152
ubuntu 10.10
Chromium version 11.0.668.0 (74550) -- using Chromium version 8 flash crash too
View 9 Replies
View Related
Jul 30, 2011
i have a problem with adobe flash player. when i watch videos or blip.tv or other video streaming sites, my computer crashes randomly during the video. it stops responding, i can't use keyboard and mouse. the only way to recover is a hard reset.it happens in ff, opera, chromium and chrome. i had this problem on flash player 10 and on 11-beta i have it too.i running ubuntu 11.04 natty 64-bit. kernel: 2.6.38-11-generic. gnome 2.32.1. with unity.
short config of my pc:
cpu: amd athlon x2 64bit dualcore
mobo: asus m2n68 (+newset bios there is)
[code]....
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
May 8, 2011
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Feb 16, 2010
I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
View 5 Replies
View Related
Mar 14, 2010
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
View 2 Replies
View Related
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
May 8, 2010
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies
View Related
Aug 10, 2010
I recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!
Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
View 1 Replies
View Related
Sep 11, 2010
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
View 1 Replies
View Related
Feb 20, 2010
I have a problem playing MIDI files on my system: I tried opening two MIDI files in Audacious, VLC, Aqualung and Rhythmbox, and Rhythmbox is the only one that will play them:
- Audacious crashes when clicking on the file in the playlist (immediately disappears)
- Aqualung doesn't add them to its playlist
- VLC produces an error msg saying it can't play MIDI
- Rhythmbox plays a MIDI file and immediately crashes at its end
I'm on Ubuntu Karmic 64 and have timidity installed.
View 7 Replies
View Related
May 7, 2010
i have ubuntu 10 lts and have searched the forums and internet yet not resolved this issue so hope i`ve posted in the right place. i have installed, via the ubuntu software manager, the latest adobe flash as every browser i try crashes within at most ten minutes of trying to play a flash video full screen, usually within four minutes. i cannot play anything on bbc iplayer or videos fullscreen and i have no idea why. i have the latest flash plugin and have tried chromium, midori, firefox, opera, conkerer (not konqueror) and epiphany and every one crashes. tried firefox in safe mode and it still happens, opera just stops playing the video but all the other browsers crash except chromium which tells me the flash plugin stopped working. i really need it working and don`t want to have to return to windows just for flash so has any one an idea where i can start in solving it?
View 9 Replies
View Related
Jul 11, 2010
If I start to play any kind of media file in Totem, the screen goes black, a terminal appears and flickers for a few seconds so fast I can't read it, and then the system shuts down.
This is what shows up in the syslog:
Code:
Jul 11 16:09:01 cylien CRON[4839]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/p$
Jul 11 16:09:41 cylien kernel: [23417.172040] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[Code].....
View 3 Replies
View Related
