Ubuntu Multimedia :: New CNN Video No Worky?
Jul 20, 2011
i have ubu 10.04 64bitit has a lot of problems so i'm thinking of upgrading but i'm afraid of the new version being too strange.anyway. so i installed the new 64 bit flashplayer, version "11,0,1,60"videos and everything else seems to work reasonably well.the classic cnn videos play reasonably well.but now every time i go to the cnn site since yesterday a new page pops up prompting me to try their new video services.i click ok and i instantly get a box telling me i need to have at least flashplayer 10.1 installed, it gives me a button to install flashplayer and that's that.their site and a few others i've seen, do a version check and since my version is newer than the official approved release of 10.x, it fails and won't play.is there anyway to mask the version of my player to fool these checks into thinking i have the version they are demanding?
View 2 Replies
ADVERTISEMENT
Aug 30, 2010
I have installed it and thought I had the firewall and all configured and yet...No worky.
View 1 Replies
View Related
Oct 18, 2010
I've been running Samba for a couple of years now. Bumped up from 9.04 to 10.10 server (64 bit), and nothing wants to work. I have a really simple share that I want to be accessible by all Windows clients without a login (guest access). Here is my config:
Code:
[global]
security = share
[code]....
View 3 Replies
View Related
Feb 22, 2010
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies
View Related
Jul 14, 2011
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Nov 13, 2010
is this possible? Or does one have to use the binary blobs?
View 1 Replies
View Related
Apr 20, 2011
I have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
May 30, 2011
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies
View Related
Jan 26, 2010
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies
View Related
Apr 3, 2010
I'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Feb 7, 2011
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies
View Related
Nov 22, 2010
Just installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies
View Related
Jul 6, 2011
I have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
View 4 Replies
View Related
Apr 1, 2011
OpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
View 4 Replies
View Related
Oct 5, 2010
I been looking on Google to convert videos to mp3 audio and all I get is just a video conversion from one format to another and some things I installed just get error messages so I took them back off. Anyone know the proper syntax in Mencorder to convert a video just to audio? Or any other program I can use that won't cause this much trouble?
View 7 Replies
View Related
Dec 17, 2010
This is my first time creating a video DVD from other video files. I drag and dropped 2 .flv files to the area where it tells you to drag them. They appeared there. Then I clicked "Burn..." and brasero disappeared.
I ran it in terminal and this is what I got:
Code:
View 5 Replies
View Related
Aug 23, 2009
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
View 2 Replies
View Related
Dec 18, 2010
how could i convert SWF video file to AVI video file on linux? is there any tools ?
View 1 Replies
View Related
Mar 24, 2010
I played a 16:9 video from the laptop on my TV, connecting the TV with a video cable. My laptop has a 4:3 screen, and that's what I got on the TV: big black borders on the left and right of the 4:3 picture. I messed around with Display Settings, but I couldn't get a 16:9. Is there some way to get a 16:9 picture on the TV?
View 1 Replies
View Related
Mar 19, 2011
I've had performance issues in Chrome and Mozilla with flash streaming video for months and am trying anything to fix the problems.Today I wound up with no video at all. You tube videos are just a plain grey box now. Daily show is just plain black boxes where the videos are supposed to appear.
View 6 Replies
View Related
Jan 2, 2010
I've downloaded a few suggested converters, but they don't seem t ohave the right combination..I have some .avi's (from my camera) and want to put them on my website (using Joomla AllVideo component) so they have to be converted to .flv or maybe .mov.
View 9 Replies
View Related
Jan 6, 2010
I just upgraded from Ubuntu 9.04 to 9.10 today, and went to watch a movie on my hard drive. I typically do this with an S-Video cord on my TV. In Ubuntu 9.04 I did so simply by plugging in the S-Video cord, then pressing FN+F4 on my keyboard. Worked like a charm.
After the upgrade the same key combination just changes my resolution setting.
View 2 Replies
View Related
Jan 14, 2010
I was using skype to make video calls from my windows machine to my home to contact my parents...who use another windows machine..without any problems for the last one month.
I switched to ubuntu just yesterday and installed skype..
Talking over to them was a pain...the line was full of disturbances and the
video was only one way though I recieved calls and could see them they could not see me
View 3 Replies
View Related
Jan 17, 2010
how to get the display to the TV so I can watch movies. I have a Compaq Presario V5000 laptop, AMD Sempron processor, and an ATI Radeon Xpress 200M card. I have been using this successfully on Windows XP, but would prefer to get my feet wet more with Ubuntu.
View 2 Replies
View Related
Feb 13, 2010
family member's PC, and ever since the upgrade to 9.10, no video files play.
All formats (AVI, MPG, MP4) do not work. When attempting to use MPlayer, VLC, Kaffine and KMPlayer. The file opens, then the program immediately closes.
Another issue is that online video's are very jerky. Before the upgrade, all of these issues did not exist.
Any thoughts or idea's on where to look? I have already tried re-installing the codec's via the restricted extra's package, and by re-installing VLC.
View 9 Replies
View Related
Mar 3, 2010
I would like to add a text to a video. Which utility should i use?
View 1 Replies
View Related
