Ubuntu Multimedia :: Mass Video Encoder With A GUI?
Jun 28, 2010
I've got a bunch of wmv files that I'd like to re-encode to avi - about 50 of them. Is there a straightforward GUI application that does the same thing as Sound Converter does with audio files? As in, add a folder full of files, select the output format and output filename/folder, click "convert", and come back a few hours later.
Yes I know I can convert video files with mencoder and ffmpeg, but doing it file by file at the command line means I can't leave it running overnight or something.
I found something called Arista but the only output options are designed for specific hardware, ie. iPods and PSPs. I just want to convert the wmv's to avi's, not mess around with resolution etc. Also, with Arista you still need to add the files one at a time.
View 4 Replies
ADVERTISEMENT
Dec 27, 2009
As K3b is the standard ripper I suppose it must be possible rip an audio cd to flac? In the plugin menu I see that the flac decoder is installed but not the encoder. Did someone already succeeded in installing the flac encoder plugin?
FYI: With virtual folders I am able to copy from the flac directory. It works to encode with flac like this but I experience the last seconds of the song are gone...
View 9 Replies
View Related
Dec 28, 2010
I want to be able to rip videos off ..... and put them on my ipod. I added installed "Download helper" which enables me to rip the videos off ..... in a flv format. When I try and convert the files to .mp4a (using the WinFF GUI) my terminal pops up and says "unknown encoder 'libx264'"
Here is the full message:
FFmpeg version SVN-r19352-4:0.5+svn20090706-2ubuntu2.2, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5+svn20090706-2ubuntu2.2 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --extra-cflags=-I/build/buildd/ffmpeg-0.5+svn20090706/debian/include --enable-shared --disable-static
[Code]...
View 2 Replies
View Related
Jan 27, 2011
i have installed winff onto my netbook but when i try to run it to covert .ogg to mp3 i get this error.
Quote:
Unknown encoder 'libmp3lame'
View 1 Replies
View Related
Nov 17, 2010
I tried to play a mpg file on a clean ubuntu 10.4 system which I guess laundhed totem movie player....it asked to me to download and install some packages which I accepted but unfortunately the quality of the movie isnt good (very black and red for all colors)...I want to un-install what I accepted previously and install the extended extra package found here:URl...
and hopefully that will set this as my default encoders and work better....however I dont know what I installed previously.does someone know what it was and how to un-install it?If there is another decoder anyone recommends for playing movies that would help as I am still at this point not sure the restricted-extras will fix my video.
View 2 Replies
View Related
Apr 20, 2011
I installed the MOTU ffmpeg and libav ppa in Natty beta, the installation went through ok and media players all work. But I am having problems converting MP4 to MP3 (extracting audio) with the error message that libmp3lame unknown encoder. I checked that lame and libmp3lame0 are both installed. I wonder what might have been the missing piece.
View 9 Replies
View Related
Jan 3, 2010
I have a load of XViD videos and I want to re-encode them into x264 - when I say a load, I mean over 300, anyone have any programs they reccomend to do it?I want to make them into those "future-sized movies" (700mb --> 300mb, 170mb --> 95mb, 350mb --> 150mb), what settings should I use? I want to keep the quality of the originals intact, along with the video sizes if possible, but if not, I don't really mind, just make them smaller. Here are the settings some people use in windows:oh yeah, one last thing - fast encoders please, I know it'll take a good while, but I want it to take as little time as possible please
View 4 Replies
View Related
Feb 4, 2010
I am so completely frustrated with this and can't seem to find any solid answers. I have a Google Nexus One phone. I want to also use it as a portable music player. I can find no player for Linux that can do ALL of the following:
- copy music
- transcode when necessary
- transfer cover art in appropriate format
- transfer playlists (music files AND .m3u playlist files)
Banshee is the closest, but it is so painfully slow, has many problems with tags and also doesn't transfer playlist files. Banshee advertises support "out of the box" for this device. I've tried overriding with an .is_audio_player file, but it is ignored. Rhythmbox will transfer song files and transcode as necessary, but no artwork, no playlists. Exaile doesn't recognize this device for some reason.
View 4 Replies
View Related
Dec 22, 2010
I share my music between ubuntu and windows 7 (nothing fancy just copy, paste, external hard drive). and have learnt that my music collection doesn't show up right in windows media player because WMP can't read version 2.4 right. most of my collection is saved in 2.4. I used mp3tag on windows for converting my whole collection but wiped the computer recently and had to start over. This time i would like to just convert my whole collection on my ubuntu pc through the terminal. I tried using EyeD3 but it didn't seem to work for me. But perhaps i typed the command wrong. Could someone show me either a proper command for converting my mp3 collection to v2.3 OR recommend another ubuntu program/commandline that can handle 7,500 songs and convert them to ID3v2 v2.3.
View 3 Replies
View Related
Mar 5, 2010
I am trying to convert some mp3's into m4r format.I got to step 4 on this page:
Code:
ffmpeg.exe -i ringtone.mp3 -ac 1 -ab 128000 -f mp4 -acodec libfaac -y ringtone.m4r
minus the .exe part. here's what i use:
Code:
ffmpeg -i test.mp3 -ac 1 -ab 128000 -f mp4 -acodec libfaac -y test.m4r
but ffmpeg throws me this error:
Code:
Unknown encoder 'libfaac'
even though i have libfaac0 and libfaac-dev installed
View 2 Replies
View Related
Oct 15, 2010
I have a 1TB external HDD which I use to store my music library of roughly 40 gigs. Therefore I would normally import music directly from it to my Rhythmbox library while keeping everything stored on the removable drive. In recent versions of Rhythmbox this is no longer needed as the application integrates my external HDD into the side pane and lists the music automatically. This is great although when closing Rhythmbox and reopening it, the drive has to be scanned all over again. This is a huge pain when it has to scan through 40+ gigs of music.
Therefore I would like this feature disabled and removed from my side pane. It is not needed and causes quite a large annoyance. Either I want it removed or the ability to keep the index of music from the drive in Rhyrhmbox at all times. Achieving this would be fantastic and would switch me back to Rhythmbox. recently I have been using Exaile which I love but rhythmbox not working bugs me.
View 1 Replies
View Related
Jul 17, 2010
I need to enable my new E2120 samsung phone as a mass storage device. but I think I need a USB driver. Had a good look round the forums but can't seem to find any posts. Its quite a new phone but hopefully the solution is already about. When I plug it into the USB the phones screen has a hashed out 'mass storage' option.
View 1 Replies
View Related
Apr 12, 2016
Since I use openbox with some packages from Xfce4 (mainly for convenience) I get most stuff "for free" as it were when using openbox, but I can't figure out how to mount android devices in a simple way. I can either do it manually, or install some other file manager that has this capability. This leads me to my question, I've noticed that if I install Nautilus, which automatically mounts android devices OotB, I get this functionality in Thunar as well. This leads me to believe that there is clearly a dependency package of some kind installed when running apt-get install nautilus that enables it, It'd be great to get this functionality in Thunar without having all the nautilus packages just littering about for no good reason. the required package is gvfs-backends, which I should have realized when I was unable to browse smb:// addresses. You forget a lot when you only make a fresh install once every 2 years or so.
View 0 Replies
View Related
Oct 31, 2010
I'm using ffmpeg to convert my files but when I tried to convert WAV -> MP3 I got this error. It's surprising for me cause I installed this one yesterday. What could happen?
View 3 Replies
View Related
Mar 16, 2011
I am trying to rip some home made sound tracks recorded onto CD using kaudiocreator. I am not infringing any copyright in doing this.It goes through ripping then encoding process but fails with'the selected encoder was not found'I am trying to get the sounds from a cd onto my mp3 player, so using mp3 as the chosen encoder. Do I have to use MP3 or can I use another encoder to do this job? I tried ogg vorbis but it failed with the same error.
View 5 Replies
View Related
Feb 22, 2010
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies
View Related
Jul 14, 2011
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Nov 13, 2010
is this possible? Or does one have to use the binary blobs?
View 1 Replies
View Related
Apr 20, 2011
I have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
May 30, 2011
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies
View Related
Jan 26, 2010
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies
View Related
Apr 3, 2010
I'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Jun 5, 2011
I need to install these packages LAME MP3 Encoder, Libogg + Libvorbis, Mencoder and also Mplayer, FFMpeg-PHP, GD Library 2, CGI-BIN on a centos . I searched the Google but most of the wget commands are not working because the links are not active links and I get error message failed: Connection timed out. Does anyone know where to get these packages with explanation of how to install them?
View 11 Replies
View Related
Feb 7, 2011
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies
View Related
Nov 22, 2010
Just installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies
View Related
Sep 9, 2010
I am testing several programs for video editing and video format change.I have been trying avidemux, and now I am trying to use ffmpeg, and a graphical frontend for it, Winff.As an example I am trying to convert an MP4 file to AVI. I obtain an error that says: "Unknown encoder 'libxvid'". How could I possibly now what I have to install to be able to convert the files without errors?
PD: This is the output from ffmpeg when called from Winff:
FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al.configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-
[code]....
View 3 Replies
View Related
