Ubuntu Multimedia :: 10.10 - Adding Bass / Treble To Sound Output?
Feb 12, 2011I need to have some tool to do mixer settings/geo analyser of sound to add bass/treble to the sound output from Ubuntu 10.10.
View 5 RepliesI need to have some tool to do mixer settings/geo analyser of sound to add bass/treble to the sound output from Ubuntu 10.10.
View 5 RepliesI am running Karmic 64bit on a frankenstein desktop. I am using an old Creative Soundblaster card with the live drive front panel. Ever since I started using Karmic I have lost many functions, there are no bass and treble controls, and no other controls other than volume and balance. Am I missing some vital drivers?
View 4 Replies View RelatedI installed Ubuntu 10.10 yesterday. I have an audigy2 sound card on my system. But did not see tone control such as bass and treble slide in mixer. When I run alsamixer at terminal window i got these controls but alsamixer does not control my sound card.
View 1 Replies View RelatedWhen I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I'm having a problem with my sound in the Natty Narwhal version of Ubuntu, where my bass doesn't seem to be working and is coming out as fuzz instead. I don't really know the technical terms for what I'm trying to describe, but instead of the deep part of a piece of music, I get this kind of v sound in the background instead. I get the same problem on headphones or from the speakers, and turning the volume up or down doesn't make any difference. Alsamixer tells me that my card is called HDA Intel, chip ALC272X. I've already tried turning down the PCA volume, as I've seen recommended in other places, but no luck.
View 1 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I'm new to Ubuntu, but have some experience with *NIX (specifically Red Hat and AIX.) I'm not getting any bass out of my 4.1 Logitech THX setup. The surround speakers are operating fine. I know that the bass unit itself is working because I was using it with windows on this computer before I made the switch to Ubuntu. If I run a speaker test from either the sound preferences or the terminal, the speakers work but the bass does not. I ran this command from a terminal to help with the diagnostic effort, but I'm not entirely sure what I'm looking at:
Code:
wget [URL] -O alsa-info.sh && bash alsa-info.sh
Here is the output of the above command: [URL]
I have been searching for an answer to this question for some time now and can't see to find the relevant information anywhere.
As title suggest I can't output 5.1 sound with Ubuntu 10.4 which I nevere faced in earlier version like any 9.04 or 8.10,8.04 etc etc.I came from 9.04 to 10.4 and noticed that sound preference has changed which earlier have Windows XP Like long sound panel.My Board is Intel 945GTP which have 3 jack
Green=>Sound Output =>Front 2 channel
Pink=>Mic In =>Center Sub
Blue=>Line In =>Rear Channel
[code]....
I have a brand new pc Running with core i3 and gigabyte H55 S2 motherboard.My problem is the sound output not come with ubuntu 10.04.
Here is my alas info [url]
Audacity doesn't play any sounds, although it can record from my microphone. And kubuntu plays the startup sounds (BTW, how to turn them off?).
Code:
arho@a91-156-166-231:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
I am not getting sound output from the system... i earlier got it...But after reinstalling I removed Sound applet from the Panel... Hardware is detected as it should be. I think it is because I configured the applet earlier, but as I removed it, I don't know how to restore it...
So tell me how to restore the sound applet as It is not coming in Add to panel menu....
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
I installed the vkeybd program to easily create some tunes, but when i push any of the keyboard buttons no sound comes out. I do have sound in programs like vlc. I thought jack and timidity may have something to do with it, but starting and clicking on things in those programs didnt get me anywhere because I dont have much understanding about them. How do I get a sound to come out of my speakers when i press a button in vkeybd?
View 2 Replies View RelatedCurrently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies View RelatedI recently got a new ATI HD 4890 graphics card that supports sound over HDMI. It works in my other OS (Windows 7) but I cannot get it to work in Xubuntu. I read somewhere that by default the open source drivers have HDMI sound disabled. How do I turn it on? I even tried the Comprehensive Sound Problems Solutions Guide and still have no sound.
View 5 Replies View RelatedHave started to build a mediecenter with XBMC, but have stoped, because there are no sound after i installed Ubuntu 10.10, using HDMI output, and have also tried all other sound output with no success
MB: ASUS AT3N7A-I
Ubuntu 10.10
Some more info:
my device is >>full aricle : [URL] I am modell : PT014AA#ABA sound was working before on the same version on ubuntu... but after reinstalling it >>>it stoped wprking although I make no changes,adding priveledges to my account...my system is up to date.
View 4 Replies View RelatedFor some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedI have had a problem with none of the microphone inputs working after upgrading to Ubuntu 11,04 64-bit on my Toshiba A665 laptop with 4-core Phenon processor. This includes the internal mic, mic jack and Logitec C610 webcam. All worked before upgrading to 11.04. The broken mic input means no Skype calls.Today I noticed that there was an application called EarCandy that is suppose to add functionality to PulseAudio, so I installed it to see if the auto-detect features would fix my mic problem.
EarCandy completely broke the two apps I tested: Skype and RadioTray. Now neither will output sound. The Ubuntu start-up desktop sound scheme also quit. So it seems that EarCandy killed all sounds that heard while it was briefly installed.How do I get sound output back on Skype and RadioTray? how to fix my mic input issue?
I have updated my Ubuntu to Lucid 10.04 from 9.10.
Although my sound disappeared in 9.10 only, I thought maybe upgrading might help, but there is no change.
I guess everything is installed fine.
But still aplay -l command shows "NO sound cards.. "
Moreover the sound preferences shows no hardware, no input and a dummy stereo output.
I have banged my head a lot trying various things written in forums and all but no success.
One more thing : When I test "osstest" , I get sound in both the earphones , but altogether there is no sound. I am very much confused.
My sound was working, but I got a new SPDIF cable, so I switched it to digital. It worked fine. But then I restarted and now it's gone.
aplay -l tells me I have no soundcard but lspci -v lists
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 836c
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
So my soundcard is there.
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
Does anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies View RelatedI just installed 10.10 and I'm having an issue where sound outputs from the headphones and my speakers simultaneously, and the volume control controls both outputs rather than one of them individually.This has been asked about before at this thread, but none of the solutions I've tried from there have worked. I tried installing linuxant, but it just killed my sound altogether despite uninstalling it afterward. I tried updating the Linux audio modules as per this page but to no avail.I'm running Ubuntu 10.10 (64-bit) on my own custom built desktop, which for what it's worth, contains this motherboard.
View 8 Replies View RelatedSound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
View 1 Replies View RelatedI would like your input please. I'm using an HP DV7 laptop and the sound works under Opensuse 11.2 but without base. I have therefore updated ALSA to version 1.0.22.1 to make use of the introduced base switch for DV7 (ALSA changelog here)
I have tried these ALSA options but without any change / improvement to the base sound.
options snd-hda-intel=hp-dv5 and also hp-dv7 and hp_dv7
options snd-hda-intel enable_msi=1
Any ideas?
The second line stops the sound from "stuttering" but the first seem to have no effect.