hi, use have ubuntu 10 as client on a windows7 comp. have used the "shared folder" options of virtualbox to share my external harddrive, the command:
sudo mount.vboxsf J_DRIVE /mnt/J_DRIVE
works. but when i go to make a launcher:
sudo nano /usr/local/bin/extlauncher
command: sudo mount.vboxsf J_DRIVE /mnt/J_DRIVE
sudo chmod +x /usr/local/bin/extlauncher
everything goes fine, but upon launching my launcher ubuntu doesnt mount my external harddrive.
adding
J_DRIVE /mnt/J_DRIVE vboxsf rw,exec,uid=1000,gid=1000,dev 0 0
to fstab also works fine.
do i need to create a launcher differently when i want it to contain a sudo command?
I am running Fedora on a VirtualBox. Sometimes to allow for performing some real hardware testing, I need to run my development environment on a physical machine. So I need the hard disk of the virtual machine (the .vdi file) to be interchangeably working on both the virtual machine itself and my physical PC by booting a bootable image, mounting the vdi file, and then chrooting to it.
I am running VirtualBox on a Windows XP host. Red Hat Linux 5.2 GUI is running inside VirtualBox. I want to use my USB pen drive inside Red Hat - it is visible from Windows XP but not from Red Hat.
Can anyone tell me what might be the problem and how I should fix it? I am new to using Linux.
Moved to virtualization forum: [URL].. I just upgraded my Ubuntu VirtualBox guest to Lucid. My host machine shares two folders with the guest. I have them listed in my /etc/fstab so they're automatically mounted:
share /mnt/share vboxsf defaults 0 0 For some reason, it looks like Ubuntu attempts to mount these shared folders twice. The first time, the mount doesn't succeed, but the second time, it does, so by the time I actually log in, the shares work properly.
Karmic would just print an error message at boot, but now Lucid makes me press a key to continue booting when the mount fails. Ideally, I'd like to figure out how to make the first mount attempt work properly. But if that's complicated, just disabling Lucid's prompt would make me happy.
For some reason the general launcher button (+ in circle) in the unity menu has disappeared. I do not know how to restore it. Which means I have great problems to start al apps that are not standard in the menu.
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I'd like to make a launcher that starts a couple of programs at once. When I switch my brain into 'work mode' I'd like one click to start evolution, firefox and sunbird.
I am trying to make an app launcher for Ubuntu which replaces the top bar (default) in gnome. It will be a menu system in the middle of the screen which you would click on parts to bring up lists of apps and locations. What would be the easiest way to do this, and in which code?
On Xubuntu, I right click something like I did on Ubuntu, to add to panel.. It just clicks the program. There is NO options when I right click a program in Applications. It's frustrating.. re's an incredibly unnecessary way that is different than Ubuntu to put an application to my panel.
i was wondering, and maybe hoping, if there was any way i can create a launcher to open a program that must be ran in terminal for it to run. i don't really like opening terminal and going to the program's location to launch it, so is there any way for this to work?
It seems as if I've really done myself in this time. I recently upgraded to 11.04 from 10.10.trouble (not showing titlebars after I had trie to enable the "desktop cube" feature) so I decided the best plan of action was to get rid of Compiz. That turned out to be a mistake. Now I have no launcher or taskbar, and since I'm somewhat, well, inept at this so far I have no idea how to get my desktop back in working order.e managed to install compiz and emerald once again, but I can't get to the startup application editor to make it run automatically. Is there a way to get the default desktop environment handler to kick back in?
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
I have a requirement that seems to be unique in nature. I have multiple clients who are caged to their home directories. I would like to "share" a directory which exists above these chroots with all these caged users. I know this can be accomplished using mounts but my problem is, how can I mount a single directory to multiple mount points located in each users home dir? Can this be done in the fstab file?
Linux box info: root@mytestbox:~# uname -a Linux mytestbox 2.6.32-30-generic-pae #59-Ubuntu SMP Tue Mar 1 23:01:33 UTC 2011 i686 GNU/Linux
Windows box info: Windows Server 2008 SP2 Enterprise I've verified via --verbose output that mount.cifs is indeed processing the passed on options.
root@mytestbox:~# mount -t cifs //10.1.1.10/Test /root/testwin --verbose -o credentials=/root/testcreds,rw,nocase,noperm,noacl,nounix,noserverin o,iocharset=utf8,file_mode=0777,dir_mode=0777
[Code]...
Yet, when I type mount all it reports is (rw,mand). The share works just fine, and I can see the masking (all files are showing as rwxrwxrwx as expected etc) but mount is not listing the options?!
Is this normal expected behavior? Is there a bug report on this? I've google'd to the best of my capabilities and could not locate any such information which is why I decided to hit the forums prior to filing a bug.
