I'm using Ubuntu 9.10 AMD/64. I moved my data partition with GParted, resulting this message from GParted
... ( omiting all previous reported ok, gparted end of message: )
copiar 65536 sectores usando un tama�o de bloque de 65536 sectores 00:00:02 ( �XITO ) 65536 de 65536 copiados 1.43313 segundos El tama�o de bloque
[code]....
Ive been trying to install gparted (from source) but configure fails with the error
Code:
Which is odd because it looks like libuuid is installed, i think its installed as part of e2fsprogs which is installed (according to synaptic). Does anyone know how i might resolve this? or is it safe to compile anyway?
As a side question, i was going to install with synaptic, but the version of gparted there was 0.6.2 while the version on the website was 0.8.0. i tried apt-get update and apt-get upgrade but the package manager version was always 0.6.2. is it usual for the package manager version to be out of step like this, or is there something else i could have done to update it?
i tried to install ubuntu on my company notebook, where already xp is installed and I have to work with on monday again ;(I have to partitions 60+60GB with XP and Data. I tried to resize the Boot one to 50 to gain some space for ubuntu. Gparted rezided and moved partition (10unallocated+50boot+60data). I guess thats when the bootloader was destroyed. Now I can not start XP anymore. JaiiXXX! But i have to.
Question now is:
-Would it help to resize again with gparted so that i have 60+60 again and can start working?
-Should i continue installing ubuntu from usb. It is recognizing all partitions correctly and asking to install in dualboot. howeber i guess, when bootloader for xp is not working now, will it work after installation of ubuntu on the 10gb or will it make things more complicated?
-My tummy says first to repair windows xp an then install ubuntu. I have no xp cd since it is company computer. will repair morde work with another xp cd? i would prefer that. i saw that there is another way b reinstalling the xp by bootloader, but it sounds to complicated to me and i am little nervous now.p.s. i recognized that now data partition is flagged with boot . dont know why but put it back to the right partition, nothing changed.
[Code]...
I have a netbook that has a dead windows partition. I've installed ubuntu and have never tried to recover the dead windows installation. However, I now need that space in the main partition. I ran the liveUSB of ubuntu and ran gparted. I have an error on that partition.
Accounting clusters...
cluster accounting failed at 66892 (0x1054c): Missing cluster in $bitmap
Cluster accounting failed at 489569 (0x77861): extra cluster in...
I think I may have attempted to resize this and I got this error. I cannot get into windows to fix anything, so I can't run scan disk or fix disk etc. I'm not sure if I can get a command prompt. I don't have a CD drive. Can I reinstall linux and use the entire hard drive? Will it do this, or will the cluster errors prevent this? Can I fix this so to resize the windows partition?
How to properly integrate these RPMs into our system?
Option 1: we could take those missing OS RPMs and install them?
Option 2: can we package the missing files from missing OS RPMs into the existing Linux-xxx.rpm?
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes
255 heads, 63 sectors/track, 3473 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I changed to wubi last night, i decided to go that way cause i was informed it was a safe way to try giving it a try for linux and ubuntu without any special effort needed to be payed and easily deleted if i am not pleased.Thankfully i am pretty satisfied with the results, i pretty much dealt with most of the issues i have faced so far successfully and i am running it ok beside one important thing.See i am using my laptop, which has a hdd of 250GB.On my Vista there are 2 different hdd C+E by default, they separated my hdd.So while i have windows on C and E is pretty much used for my additional data(see movies, music etc) when i installed wubi i installed it on E, thought it would be better and it had more space.
Now though, while i can access threw ubuntu all my files that were located on C(vista) i cant access any of the E ones, and search file dont helps either.The "vista hdd" as ubuntu describes it, its a 250 gb disk on computer, which means it should contain both of the vista disks.But sadly thats not the case.i cant seem to be able to find them anywhere.
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
I have created 2 files and put them in a folder in ubuntu 11.04 64bit. The partition is ntfs and is shared b/w ubuntu and win7. The partition doesnot have win7 installed on it, win7 ubuntu and data partition are three seprate partitions of a disk. when i logged in win7 the files and folder newly created were missing. then i logged back in ubuntu and they were missing from there to.
I have edited /etc/fstab =>
"# data Drive
UUID=C8E8EC38E8EC2682 /media/data ntfs auto 0 1"
so that the partition mounts itself at boot up, thats it I do not specifically unmount it, i just shutdown the pc normally. also win7 is hibernated, but its on sda0 its a different partition.
Ok so I transferred about 6 or 7 gigs of music and videos to my laptop in 2 folders and 1 file just in the d:/ folder. This leftme with just one gig of space left on the drive. Now I turned of my computer and the next day when I turned it on, the files were gone or so I thought. The files are still taking up the space and when I tried defragging in windows, the files showed up under files not defragged and so did their old directories, but they still do not show up in ubuntu or windows explorer, I cannot navigate to them or open them, yet they are still on my hardrive and taking up space. How do I either get access to these files or delete them to free up space?
View 6 Replies View RelatedI have upgraded both my desk- and laptop to 10.04 a week ago, and with practically no problems. However, today both have problems during boot. It takes longer than normal and when I open the log-file I get a message "Could not open the following files". There is a long list of files in /var/log that couldn't be opened as "No such file or directory": pm-suspend.log, wpa_supplicant.log, syslog.0, jockey.log.1,kern.log.0, auth.log.0, daemon.log.0,debug.0, messages.0, dkms_autoinstaller and finally "/var/log/btmp: The file is not a regular file or is not a text file". Seems problem started after a kernel update today.
View 5 Replies View RelatedI had a drive failure on my media server. I have replaced the drive and since my backup was a bit out of date I lost some material.
I thought, no biggie, I'll get everything back in order and just use the Missing Files list in Rhythmbox to figure what's missing.
Problem. Though the file count diminishes as Rhythmbox scans the library for file changes, nothing is being added to the Missing Files list. I have done this on two machines (one the server itself, the other across a Samba share). Same behaviour.
I have never seen Rb count down files and not add them to the Missing Files list.
When I download something on ubuntu, I sometimes copy it over to my mounted Windows drive. When I then reboot into Windows, the files aren't there. They're missing. (It used to work before - now it's strangely stopped). When I log back into Ubuntu, the files are gone again!
View 4 Replies View RelatedMy system is setup like this: 1 250 gb HDD, with a 20 gig partition for /, 200 gigs for /home and the rest is a swap file. I also have a 1 TB (ext3) and 1.5TB (ext4) hard drive that are also installed, mounted to /Shared_1TB and /Shared_15TBI just installed Ubuntu 9.10 and everything seemed to be fine. I installed all the updates, install the Nvidia proprietary drivers and got my HDMI audio working. I went to try and play a video to see what would happen.... there are no files in /Shared_1TB. It is totally blank. I tried making myself the owner, and while this worked it didn't help anything. I tried unmounting and remounted, however it kept saying it was busy and wouldn't remount it. At this point I was a little panicked, so I threw in a LiveCD and low and behold once I mount it in the LiveCD all my files are there.
View 5 Replies View RelatedJust completed downloading kubuntu-9.10-dvd-amd64.iso and found that a few files were corrupted. Would rather not download again since I have a slow connection and this download took almost 80 hours!!
Tried torrent---doesn't allow downloading files in the iso.
The corrupt files are listed at the end. Can some kind soul provide a link to these files?
1. ./install/netboot/pxelinux.0
2. ./pool/main/l/language-pack-ku-base/language-pack-ku-base_9.10+20091022_all.deb
3. ./install/netboot/pxelinux.cfg/default
4. ./pool/main/n/network-manager/network-
[Code]....
My computer crashes occasionally and all of the files that have been written in the last few hours seem to disappear. On XFS sometimes they turn up in lost+found after xfs_repair. The files in ext4 seem to be gone for good.Is there any way to force linux to flush the meta-data more often or something so my files stop disappearing?
View 2 Replies View RelatedI have tried to compile several programs from source code and have into a similar error in each case. I try make the program and I get an error like: fail program confsdefs.h. Reading further into the log file, I see there is a long list of missing library files when I compile something like Samba 3.5.x:
[Code]...
I have searched for dependency information and used apt-get to add anything I can find. How can I identify and find the dependencies for source? I have checked the source documentation though typically does not list required packages. My other question is how to check the path used to locate the libraries? Given the length of the missing library list, I think the problem may be configuring make.
i am running 10.10 server. i shut down the server to install a new hard drive for backups. When i remounted the drives and restarted the shares, About 10 very important files were missing. The rest of the data on the share is fine.
View 2 Replies View RelatedI downloaded Nagios Checker and i was told in this web [url] that i have to add the add-ons for Nagios Checker. But when i opened the firefox browser, i went to Tools > Add-Ons.. under the Add-Ons i did not see the Nagios Checker, by right it should appear..how come?
View 4 Replies View RelatedRegardless of the fact that editing these files is necessary for good functioning of my system, my standard 10.10 ubuntu installation seems to lack these files:
XF86config
Xorg.conf
/etc/printcap
Am I the only one who witnesses this in ubuntu? Perhaps I need to apt-get install some things? Knowledge about these files is important for my study.
Ubuntu 10.04 Beta - I recently upgraded from 9.10. I have for some time been using an IOMEGA External drive, storing files created using Open Office. After I upgraded I continued to use those files and open them in OpenOffice 3.2. Yesterday I opened the drive to work on the files and the entire directory is missing. All the other directories seem to be there. Bizarre.
Have tried using "locate" in the console, but the files are nowhere to be found. I tried accessing the permissions on the external drive but get the response "The permissions of IOMEGA HDD could not be determined". Using a dual boot system with Windows Vista, booting through Grub.
I have an external harddrive of 500GB. It's almost fully loaded with TV series and movies. Nautilus says there's 60 GB remaining space. I just downloaded some movies, and copied it to this external hard drive.And here's the strange part, after I did this I only see a very small subset of all the movies I stored on that harddrive in nautilus. With 500 GB almost full, you can imagine there are quite some movies on it, but I only see 12 of them in nautilus.
View 2 Replies View RelatedI am doing a honeypot project, and after I install nepenthes: $ sudo apt-get install nepenthes
$ nepenthes
I find that there are no configuration files in /etc/nepenthes/, and only a signatures document.
I searched in the internet, all the install guides do not mention this problme, just say that if updating the nepenthes, the /etc/nepenthes/*.conf will not automaticly update.
A couple months ago, I created a dual boot between Windows 7 and Ubuntu 10.04 using wubi. I then upgraded to 10.10. What would usually happen is I would start up my laptop and it'll go to the Windows boot manager, letting me choose between Windows 7 and Ubuntu. If I would choose Ubuntu, it would go to a GRUB boot manager. It would let me choose between several different ways to boot Ubuntu, mainly that there were different options that were all the same except they had different numbers in the name, i.e. Ubuntu, whatever, 14.33.22.19.25 or something like that.
A couple weeks ago, I updated to 11.04. At first it worked good, but then a couple days later I updated a bunch of packages. It tried to CAT a GRUB file and failed. It gave me an error code, but I ignored it. Yesterday, I updated again, but since last time failed, it told me to do a partial upgrade. This I did, and it was successful. But now, everytime I go to GRUB and try to select any of the options, it tells me "Error: File not Found" and I cannot boot into Ubuntu. There are recovery versions for each choice, and using these I can boot into Ubuntu in low graphics mode and I can also get to a command line prompt.
Last night I attempted to upgrade my Ubuntu 10.10 (amd64) machine. After reboot (it installed a new kernel), the grub menu only had the memtest. Booted into a livecd and it seems that I was missing most of the files in /etc/grub.d/. Reinstalled grub-common and grub-pc didn't seem to restore the files. I ended up having to download the dpkg, expand it and copy the files manually so I could get the box generate grub.conf and boot up. I think grub may have been broken before the upgrade but exhibited the problem when it upgraded the kernel and reran upgrade-grub but I can't seem to figure out why reinstalling grub doesn't add the files back.
View 2 Replies View RelatedI have a question on using diff. I have two files that contain directory/file listings: d11.lis and d11.lis from a previous day. I am not interested in files that changed, or were added, I just want to see a list of files that are missing on day two.
View 5 Replies View RelatedI have an external 2.5" eSATA drive which up till now was using via USB2.0 connection and was working perfectly. The drive is pretty new - I think less then a year and it's a Seagate too of which I think to be more reliable although still consumer based.I had connected the drive to FreeBSD 8.0 32bit on my server in ReadOnly mode using ext2fs in order to stream the information across my network.
Plugging the drive into Linux recently yielded everything performing fine, as the drive stores all the seasons of a TV show I started recognizing that things where outa whack when the linearity of the episodes stopped being sequential and previous episodes started playing when clicking an incremented episode.
The drive is formatted with the ext3 filesystem and I have already attempted to run e2fsck -p on it which showed up as the drive being 'clean'.I then attempted to use my notebooks eSATA Express card to connect the drive via the eSATA cable as I have found it to be more reliable then the USB2 / ext3 solution which I've had my fair share of problems with. However, the drives TOC or Journal maybe damaged by whatever reason so I will need to repair that.I stumbled across Magic Rescue and so far have compiled it but not used it as I wanted to be sure first if there was another way to do this.
Moved to Linux - General (mods please delete this thread).
View 1 Replies View Relatedi was trying to install iftop using make installso when i ran /configureit told me that some header files are missing and some modules aaare also missingis there a way to search for the missing header files on the internet and missing modules n the internet
View 1 Replies View RelatedI just tried to install kubuntu 6 times on my laptop. I have downloaded the file from a different mirror each time and burned the image via brasero. This used to work for me... Kubuntu will not install. Keeps saying its skipping missing files or something. Anyone else getting this? I eventually gave up on 9.10 and am now trying alpha 1...
View 7 Replies View Related