Ubuntu :: Lost Password - Can't Boot To Command Line
Sep 1, 2011
I don't recall my Ubuntu password.**
I found instructions regarding recovery.
They involve pressing Ctrl-Alt-F1 while booting the Ubuntu live CD.
If I allow the live CD to boot, I arrive at a Ubuntu GUI.
However, if I press Ctrl-Alt-F1, the monitor (HDMI TV) goes blank and indicates "no signal
correcting the password from a GUI (can I just go to a command prompt from there somehow, and work from that command prompt?) or getting my video to display when I press Ctrl-Alt-F1?
** (I remember trying to set up the system with NO password).
It's absurd to require one.
Especially so if a person with a live CD can simply change it (I guess at least the change would be detected).
View 1 Replies
ADVERTISEMENT
Mar 26, 2009
I tried a program called BarPanel, which replaces the Gnome Panels. The installation instructions told me to download the program installer (the program installs automatically for Debian/Ubuntu users). Then I had to go to System > Preferences > Sessions to remove the gnome-panel entry and add the BarPanel one. So far so good. On re-starting, the new panels were installed to my desk top in bright green! The problem was that a lot of the icons don't work. The action menu does nothing and there is no entry for Sessions in the System menu, so I can't go back and undo. I have re-installed gnome-panel under Synaptic, without any success. I un-installed BarPanel, so I now don't have any panels at all now! One good thing is that I have Cairo-dock on my desktop, so I have access to several programs, including the terminal.
Can someone out there give me the command line instructions to get the gnome panels back.
View 2 Replies
View Related
Feb 11, 2010
At the Command Line Prompt I am able to start some Applications (such as openoffice.org or evolution) and the command line prompt re-appears after program is launched and I can continue working in that Terminal. However, other Applications, such as Totem or Blackboard will launch from the Terminal but the Prompt does not re-appear. Where Totem is concerned I get a message stating "sha module is deprecated use hashlib module instead". Where Blackboard is concerned the command line does not reappear. I have to use Ctrl + C to get the command line back but this closes the application as well! Or, I have to open a new Terminal. why some applications will start from the command line and others do not? How do you get the prompt back (other than q or Ctrl + c) thanks to all and kindest regards ( I am using Ubuntu 9.04)
View 3 Replies
View Related
Sep 19, 2010
When Linux ask for my password in command line,my keyboard becomes unresponsive just for that moment or let me put it this way,until i need to write my password my keyboard is unresponsive,but for all other things is fine.or for example,i can input my password when i have a graphic interface but i can't with command line or i can't login to my computer from command lineexcuse me if my question is doll,i moved from windows to ubuntu just lastweek,( & i am flying high in sky with ubuntu & digging a very deep hole for windows too!!.)
View 2 Replies
View Related
Aug 3, 2010
While trying to download themes for fedora 12,I get to the end it ask for my PW (in sudo) then says it is incorrect.When in graphic inter phase all my passwords are excepted.I've been reading the linux manuel. but can't find the anwser.If I am to put anouther password in where do I do that and how.
View 13 Replies
View Related
Aug 4, 2010
I am writing a script to get hardware information of a particular UNIX machine. To do this, I ftp a shell script (commands to get h/w information) to the target machine and then use SSH to remote the remote script.With FTP, I can pass a password accepted as input the shell script. How can I pass the same password to SSH ? This is because I do not want the user to enter the password twice.
View 5 Replies
View Related
Feb 10, 2011
I have Fedora 14 with minimal installation (without graphical interface and so on) and the application I've been working needs to be initialized on boot up. So, I need to disable the login prompt (and password) by command line. How can I do it? I've seen by GUI, but with command line nothing...
View 2 Replies
View Related
Jun 8, 2010
I have an old PC (130mb RAM, 6gb hard drive).
I installed a command-line version of Ubuntu 10.04 using the Alternate CD. The machine was wiped, and I used most of the default settings.
I used a thirteen character user id which consisted of mixed case letters and numbers, and an eighteen character password that contains mixed case letters and numbers and a # sign.
When I rebooted, the command-line login would not accept my password. I assumed I had somehow made a mistake, and just wiped the machine again and reinstalled. This time I was very careful with the user name/pw.
Again, the command-line login did not accept my password!
On a hunch, I took an old Ubuntu 7.10 Alternate CD and erased the machine again. I installed a command-line version of Ubuntu. AGAIN --- it will not accept my password even though I'm 100% sure it is correct.
View 2 Replies
View Related
Mar 31, 2011
I have the following commande /sbin/fuser -f -u /u/DT01/F010107 1>/tmp/null 2>/tmp/seausr.T0069 when executing as root 'su' this give me all user using the file. but when tried with 'sudo' i am asked with 'user password'. Is ther anyway to simply get the result without having to supply a password and to see all user not only me. (i have the file open also).
View 1 Replies
View Related
Nov 4, 2010
I need user to input a password through command line in Windows cmd prompt. Is there a way to encrypt the input (such as put it into ......) when user is typing ?
View 2 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Mar 4, 2010
Is there something I can add to my "menu.lst" file to give me the option to boot Ubuntu into command-line only without needing to edit system files every time I want to switch
View 6 Replies
View Related
May 24, 2011
Despite my best efforts to have them use debian or ubuntu server, a client wanted ubuntu 11 on the new server they built. It runs all the services I need it to, but would be nicer to have that server boot to command line. It seems nothing is going to work. I have tried:
1. changing /etc/default/grub to "quiet splash text"
result: blank screen
2. sudo update-rc.d -f gdm remove
result: no change
3. echo manual | sudo tee -a /etc/init/gdm.override
result: blank screen
Has anyone gotten Ubuntu 11.04 to boot to command line out there?
View 3 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
Mar 14, 2010
EDIT: sudo /etc/init.d/gdm stop worked, not sure why it did not before. Sorry for the whining!
I need to boot Ubuntu into a non-x, command line mode. So I can install an nvidia driver for my new GeForce GTX 260 (I had a GeForce 7900 running on my Ubuntu system using the synaptic open source 185 driver for nvidia, but there is no driver except the one I downloaded just now from nvidia's site for the GTX 260 card). That requires there be no X session running, not even in a separate domain so to speak. There is no rescue mode in Grub2. Recover mode in Grub still boots an X session (Gnome). Alt+F1 appears to be a clean command line terminal but even that does not work because the nvidia driver installer script sees through that ruse and knows there is an active Gnome session. I tried sudo /etc/init.d/gdm stop and that did not work. I tried ctr+alt+backspace and that did nothing.
What can I do? I tell you some days linux is just too frustrating, about to just toss the baby with the bath water and go back to Winblows. Bought a new graphics card today, and here I am stuck not being able to even install the driver from a command line prompt, geesh.
View 3 Replies
View Related
Aug 8, 2010
Just installed Ubuntu 10.04 LTS as a VM on MAC OSX. I want to auto boot to the command line, but the GUI keeps coming up. I ran "sudo update-rc.d -f gdm remove", but it didn't work.
View 8 Replies
View Related
Mar 12, 2010
Running 11.2, Is it possible to configure it to boot directly to a command line, outside of the GUI....as a default
View 9 Replies
View Related
Jan 9, 2010
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
View 2 Replies
View Related
Mar 13, 2010
I have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"
View 3 Replies
View Related
Apr 6, 2010
I just installed a fresh install of 9.10 on my amd64. when it starts it locks up right away. i know that this has to do with my nvidia card. i've had to do this in the past. but since it locks up i have no way to get into the command line. ctl-alt-F1 does not work. is there a way to just have it boot right to the command line without loading up gdm?
View 1 Replies
View Related
Sep 1, 2010
I did a clean install of Lucid from the alternate installer, onto a generic Intel/Celeron PC box. I used a command line only install, and used the entire hard disk; there's no other OS and no other partitions on the disk. Install goes along and finishes fine, reboots, and I can log in. But if I call sudo reboot, or shut down the machine then restart it, the boot process hangs. I see the POST screen, then a flashing cursor on a black screen for a few seconds, then the monitor goes into standby. I see no messages or any kind of output to the screen. I get the same problem using the Lucid Server installer and also when installing on a different box (Dell Intel/Celeron). I also tried running all the updates after install but before any kind of reboot...same thing.
This only seems to be happening using a command line only version of Lucid. Lucid GNOME/XUBUNTU install and work OK on both boxes. I can boot from a CD or USB key, but not sure where to look or what to check.
View 1 Replies
View Related
Dec 20, 2010
In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........
Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.
Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.
View 5 Replies
View Related
Jul 8, 2011
Would be possible to have a dual boot with Ubuntu only loading the things necessary for command line use of emacs?
I thought it might be good to be able to take notes for class on a quickly booting command line. (It has the added benefit of being less distracting)
Does it work like that? Could a pared down command-line only install be sufficiently faster on boot-up? Might another flavour of Linux be more suited to the task?
View 4 Replies
View Related
Jul 28, 2014
What is the simplest way to boot to command line rather than gdm ?
I've seen post to change
# The default runlevel.
id:2:initdefault:
to
id:3:initdefault:
and
update-rc.d -f gdm remove
update-rc.d -f kdm remove
update-rc.d -f xdm remove
View 7 Replies
View Related
Aug 20, 2010
I am following an instruction on the Internet to set up a timer=1. "You can force use of the timer interrupt by using the timer=1 module arameter (or oprofile.timer=1 on the boot command line" When I type "modprobe oprofile timer=1" at the command line, I got a warning message saying that "Deprecated config file /etc/modprobe.conf" So i want to try other way by setting it at the boot command line.
View 2 Replies
View Related
Sep 29, 2010
I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.
View 4 Replies
View Related
May 27, 2011
When I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie
Code:
grub>_
I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here
[Code]...
Thus boot configuration files have been lost..i think I have to install Fedora again
View 2 Replies
View Related
May 15, 2011
Running Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?
Here's a method:
Alt-SysRq-e - Requests kernel kill all processes except init.
View 2 Replies
View Related
Jun 14, 2011
It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies
View Related
Mar 19, 2011
I have Debian 6 installed on my netbook which I tend to spend more time at a command prompt then gnome so I would like it to boot to the command line with the same services as the default with the option to "startx"
I tried ->
Quote:
1. update-rc.d -f gdm remove
2, Updated inittab
id:3:initdefault: --> from default of 2
No luck.
View 3 Replies
View Related
