i have one partition of 45 Gb...and other of 250 Gb in which windows 7 has been installed..i booted from ubuntu 10.10 CD and then i chose the installation option on desktop...but when i selected the partition of 45GB for installation..the error message said that "there is no root file system on the drive, set it from partition options"..
View 2 RepliesI can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.
View 3 Replies View RelatedI have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
I was trying to install Ubuntu desktop and laptop edition on a Sony Vaio netbook from a USB drive, but after I select the entire disk to be used and hit enter I get this message No root file system is defined. correct this from the partitioning menu. If I try to start windows I just get s black screen.
View 9 Replies View RelatedWhen I get to installation step "Allocate drive space" I get this message, "No root file system is defined. correct this from the partitioning menu." What is the source of this error and what do I need to do to correct it? I don't see a partition menu other than a choice of using the whole drive or a partition? Below are the choices that I have made. Specify partitions manually (advanced) Allocate drive space Choice are device (/dev/sda4) Type ((ext3) size) Mount Point (no choices offered) Size (42088 mb) used (670 mb) boot looder is sda Windows 7 ext3 42088 MB I am installing Ubuntu 10.1 on a seperate partition. Windows 7 is on another partition. The machine is an ASUS A52F Laptop
View 2 Replies View RelatedI am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View Relatedif this is an error that has already been solved, but I am running Windows 7, and when I finish installing Wubi in Windows, it asks me to reboot. I select Ubuntu and it gives me the error: "No root file system is defined. Please correct this list from the partition menu." I can't get past this error.
View 5 Replies View RelatedAfter a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies View RelatedI am trying to install Ubunto 9.10 on my windows XP. I try to run it from the live cd. but every time i try to do this.. I get an error "Unable to find a medium containging live file system" I tried it from different cds too... so it's not an error in the cd.
View 2 Replies View RelatedTrying to install from netbootin...gives me that error.
View 4 Replies View RelatedSo I have an external hard drive (wd passport) that I want to install ubuntu on. I created 100gb partition via diskutility (fat32) and it seems I can't install ubuntu on this partition.
View 3 Replies View RelatedI would like to start off by saying this: I am very new to Linux, and this is my first time installing it, therefor I am having some very newb-like issues. Please bear with me.I am currently at step five of the installation process of Ubuntu, and I clicked on the partition which I have set aside to install Ubuntu onto, but when I proceed by hitting forward, I get the following error message:"No root file system is defined.Please correct this from the partitioning menu."My question to the community is, how would I correct that? How do I turn my 20GB partition into the root file system?P.S. I searched the forum for this issue, and being that it sounds so simple, yet I found nothing about it being previously asked, I feel sort of dumb....
View 9 Replies View RelatedWhen I tried to install 10.10 'side by side' with 10.04 and OpenArtist for triple booting I get the messageQuote:No root file system is defined. Please correct this from the partitioning menu.I don't have the screen in front of me now but what5 does it want me to do and how do I do it?
View 9 Replies View RelatedI'm having a problem and it seems like partitions during the dual boot install.
Here's EXACTLY what I get...
Menu: Allocate drive space
Erase and use entire disk
X Specify partitions manually (advanced) [X denotes I chose this option]
I have 3 partitions on my gateway laptop...
[graphical bar across the top]
sda1 NTFS - 10g - weird partition w/recovery software or something from Vista
sda2 NTFS - 140g - Windows Vista
47g FREE SPACE [this is where I want ubuntu]
[Code].....
I click "Install Now" and I get this error:
"No root file system is defined. Please correct this from the partitioning menu."
I am running a RAID0 array, with Windows 7 Ultimate x64 installed.
When i install LL10.04 through Wubi, it installs fine, reboots, continues the installation procedure, then it gives me an error box "No root file system is defined".
I have attempted pressing the "OK" button 10 or 15 times, however it does not progress. The box just keeps on popping up. My only option is a hard reset.
I've tried downloading the latest version of Wubi from the official website, and allowing Wubi to download ubuntu itself, and still nothing.
I do not want to create a new partition for Ubuntu and use the GRUB loader. I have a multi boot system and would like to stick to the windows boot loader.
I am pondering a reinstall of a freshly installed Ubuntu; I may or may not take that drastic step.However, I have partitioned my drive to include a 16-GB partition labelled "Ubuntu-tmp", in my case /dev/sda7, with the intent of mounting that file system as /tmp. Depending on how I decide to go about the reinstall I need an answer to these questions:If I reinstall: Is it possible to designate /dev/sda7 to mount as /tmp during the installation process?If I cannot designate the mounts at install time, or if I opt not to reinstall: I can't really empty the /tmp directory in the root in order to properly use it as a mount point for [the file system on] /dev/sda7; many files in there are still in use by running processes. So how can I clear the /-mounted /tmp directory and assign it to /dev/sda7?
I have attached a screen shot of gparted to illustrate my layout scheme.The gparted manual suggests I select the partition, click [Partition]->[Mount]. Of course, my gparted drops a menu with [Mount] is absent and an [Unmount] option is greyed out.This raises a question of how I am going to mount /users and /var in their intended file systems (/dev/sda8 and /dev/sda9, respectively), because the [partition] menu looks the same for these partitions as well.
So I keep getting this error from the 10.10 installer:
"No root file system is defined. Please correct this from the partitioning menu."
However the partitioning menu shows no disks or partitions at all.
The disk browser can however see and mount both partitions from my disk.
It is a terabyte SATA drive and the bios has been set to IDE.
It has 2 partitions with windows installed on the first partition.
Gparted can see both partitions but claims it cannot find the mount point of the second partition. (both are NTFS)
I have attached a screenshot.
How to proceed from here so I can install Ubuntu.
I'm trying to install ubuntu on d partition i deleted, which now is "free space" but its giving me that error
So im guessing i have to click on add, what do what i click on? primary? beginning? end? ext 4 im guesing and which mount point?
Im installing it on d portition which i deleted and is now free space, i have windows 7 on c.
I've been trying to install ubuntu 11.04 64 bit on a partition next o windows 7 64 bit.When I use the default option (no matter how large I make the partition) I get the error message that not enough space could be created. I read this could e solved by defragmenting the hard drive which I did, but the problem persists.I next tried to partition manually but go the error message that there was "No root file system is de or something similar
View 4 Replies View RelatedStarted slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
View 14 Replies View RelatedI recently recieved Ubuntu 9.04 Desktop Edition CD-ROM through snail-mail after requesting a copy online and I want to install it on my laptop, although I wish to keep Vista which is on it now.
My laptop has a 250GB hard drive. Although when in Vista this is represented as two separate drives each of 110GB, (C or ACER and (D or DATA.
Using the CD, I start the installation and everything is straightforward and self explanatory, until I get stuck at step 4...
Where I am told by the ubuntu installer: "This computer has several operating systems on it." (I'm confused now, I thought it had one, Vista.)
Beneath I am shown a bar representing my disk space which is divided between...
I am given the option to use the entire disk: 'SCSI1 (0,0,0)(sda) - 250.1GB ATA WDC WD2500BEVT - 2', (and from the mention of 250BG in the name I'm assuming this is one disk and not the two separate drives named C: & D: in Vista.) ...along with a warning - "This will delete Windows Vista (loader), Windows Vista (loader), Microsoft Windows XP Embedded and install Ubuntu 9.04". (The aforementioned "several operating systems" obviously.)
But I wish to keep Vista, so I select the option to "specify partitions manually" and am brought to a screen named 'Prepare Partitions', where there is a table somewhat like this:
I am then given the option for "New partition table", and if I select any of the bottom four devices I can 'edit partition' or 'delete partition'.
Selecting the device /dev/sda3 (because it is the one that I'm guessing has no operating system data on it, judging by the previous screen) and choosing 'edit partition', allows me the following options...to create a new partition size, to select what I want to use the partition as. (There are also two options for formating a partition, which is a checkbox, and Mount point. These are both greyed out.)
When I look at the 'Use as:' option, within 'edit partition', the drop down box allows me to use the partition in the following ways:
- do not use the partition
- swap area
- NTFS
- FAT 32 file system
- FAT16 file system
- XFS journaling file system
- ReiserFS journaling file system
- Ext2 file system
- Ext4 journaling file system
- Ext3 journaling file system
standard Linux installation utilities split the root file-system and the home file-system on two separate but relatively equal-sized partitions? For example, when I put fedora on an 80GB disk, it automatically gave the root file-system 32GB and home 30GB and the swap 8GB of space. However, since my home file-system has a directory with 28GB of files in it, why is my root file-system reading 100% usage? Is the home FS overlaid on top of the root FS? Is there an advantage to doing this? I just made a boot partition (50mb or so), a root partition (90% of the disk space) and a swap (4%-5% disk space).
View 5 Replies View RelatedI installed
Ubuntu-11.04-beta1-desktop-i386
Ubuntu-10.10-netbook-i386
From windows 7 i select to install on same windows7 partition after installation i select ubuntu and it start up to complete the installation put i get a message: "No root file system please correct this from the partitiong"
I reinstall again on a vartual machine with windows 7 it worked ok;
I installed it with other pc with windows xp it worked ok
I installed on another labtop the same problem occured.
I'm a long time user of Debian, but I'm having trouble with my partitioning process. Here is where I currently stand:
I am installing the latest Wheezy build. I am trying to install debian with an encrypted LVM that spans two hard disks.
My partitioning layout is as:
1. /home
2. /root
3. swap
4. /boot
I then added partitions 1, 2 and 3 to a physical volume group. I then took that physical volume group and added it to a logical volume. Then I encrypted the logical volume, leaving the /boot partition untouched. I was under the assumption that the only partition the system needed free to reach the loading of the LVM is the /boot partition, as it holds the files necessary for booting. But when I attempt to finalize the disk, it gives an error stating, "No root file system detected". That would be an issue as it is currently sitting inside the encrypted LV. Am I wrong in including the root partition in the encrypted LV?
What is the best way of having as little of my file system non-encrypted as possible while still allowing a proper boot?
I am running Ubuntu 11. 04 on my 160gb HD, which is making funny noises and could be on its way out. I have in my PC a 500gb HD on which I would like to install 11.04, but, althogh the dis has installed OK on my laptop, and on my 160HD on my desktop, it will not install on my 500gbHD, everytime I try I get the message "no root file system is defined, please correct this from the partitioning menu"
Snapshot of my drive............................
Screenshot.jpg
How do I partition it.
I just completed the ubuntu 10.04 installation using the windows' installer.After the installation, the system reboot. I chose "ubuntu" from the OS selection screen.A message appeared that the system would verify the installation parameters.
Suddently, a message was shown:
"no main file system chosen. Please solve this error from the partition menu."
And it wouldn't continue!
how can I find the partition menu and set the file system for the ubuntu?? An idea would be to enter the installation cd for windows (as if I would wanted to format the pc)...wouldn't then the partition menu appear?
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
i installed ubuntu 10.04.. all very nice, but not the os for me.. lightscribe problems, front ir panel problems. minor niggles for sure, but enough for me to go ahead with formatting and installing windows. simple job...or so i thought... using windows set up, i formatted c: and continued with install...on first restart i got a grub error saying unknown file system... i have tried loads of different things... fix mbr fixboot, that nt60 one. dban wouldnt work either.. im at my wits end ive spunked the best part of 1000 on this system and my wife is nagging me.
View 4 Replies View RelatedI'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:
[Errno 30] Read-only file system: '/target/bin'.
Curiously:
* Windows XP will install to this SSD with no issues
* I can install 10.04 to a standard HDD with no errors.
What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)
I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.