Recently, I noticed mount.ntfs process is eating complete CPU power. I think it came with newest update. I use fully updated 10.04, and having some SMB shares mounted to /mnt
View 8 RepliesSince I installed Debain Squeeze with KDE (for more than a month), there is something I cannot explain to myself. 5-10 minutes after bootup my hard disk begins to work very intensely. Then, after 2-3 minutes it comes back to its normal operation. Using "atop" I found out that the first process that squeezez my HDD is "find". Then, a little bit later, mount.ntfs-3g appears. Both do what they do, then exit and everything's back to normal. What I suppose, is that that something is searching, first on the Linux partitions, then on the ntfs partitions.
Does anybody know what is this phenomenon related to? Or at least, how could I find out. Ah, and to avoid some basic troubleshooting questions: I have 3 GB of RAM, so no swap is needed. And I repeat: it's find and mount.ntfs-3g that use the HDD.
Can mount.ntfs and mount.ntfs-3g reside simultaneously?
Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?
About dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.
View 1 Replies View RelatedTrying to mount my NTFS file system (portable hard drive) so that is can be recognized by a program I have installed in wine (seagate manager). I've tried to change the mount point for the drive to /home/.wine/c_drive but that doesn't seem to do the trick, and messing around with the fstab file just results in error messages when I try to mount/unmount the drive.
who to change the mount point properly? /dev/sbd1 is my partition.
Either that or does anyone know how to configure wine so that it will find my drive? I've tried adding an e: drive to the drives tab and mapped it to mediaSimons' Seagate (partition label), but that doesn't seem to do the trick either.
Background for the problem:
A. I have partitioned my WinXP LTop into:
--- WinXP NTFS partition
--- a vfat partition (mounted onto /fat32)
--- Installed F10 on ext3 virtual partition
B. I do not want install grub-loader in the Master Boot Record (that would loose my WinXP boot-loader for ever)
C. I have installed grub boot loader in the First Boot Sector
D. Now I have to boot using Rescue Mode, do:
1. dd if=/dev/sda2 of=/fat32/linux.bin bs=512 count=1
2. mount -t ntfs /dev/sda1 /ntfs
3. cp /fat32/linux.bin /ntfs
4. modify /ntfs/c/boot.ini and introduce the statement 'c:linux.bin="Linux"'
Problem: Im not able to do step D.2 above.
Symptom:
** after booting linux using the Rescue Mode: sh-3.2# chroot /mnt/sysimage sh-3.2# uname -r 2.6.27.5-117.fc10.i586 sh-3.2# mount -f ntfs /dev/sda1 /ntfs FATAL: Could not load /lib/modules/2.6.27.5-117.fc10.i586/modules.dep: No such file or directory ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
sh-3.2#
Observations:
* The rescue mode boots into i586 based kernel (I dont know what is the actual difference between i586 and i686 - will really appreciate if anyone can educate me about it). * The installation is only a i686 image and consequently there is *only* '/lib/modules/2.6.27.5-117.fc10.i686' dir and *no* other dir. There is no dir as xxxx.fc10.i586.
I am have been noticing nearly 100% Usage by the NTFS driver. According to top the "mount.ntfs-3g" use up to 100% when I am accessing NTFS partitions (one 1 core I believe). My CPU is reasonably fast Intel E8400 3.0 ghz. I find it horrible that its stuck at nearly 100% just because I decide to heavy access the NTFS file systems.
I have been google online and have seen dozens of similar complaints. Most people haven't found a real solution. Is there really any good solution for this?
When I was running Windows XP, I never noticed anywhere near 100% usage when access the Hard drive heavily. Is the Linux NTFS drives just very bad in performance compared to the native Windows drives?
I have two NTFS volumes I want to automount at boot. I can't get my user account to mount them in Fedora 10. I keep getting the message that the two lines I have edited in fstab are bad. The volumes are sda2 and sda8, and the volume names are SPACELAB and Spaceman. I also need to be able to mount an NTFS usb drive from time to time. I am getting frustrated, so I have posted my fstab file below,
#
# /etc/fstab
# Created by anaconda on Sun Mar 1 12:44:11 2009
#
[code]....
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies View Relatedi have an ntfs partition that i want to mount. before 10.4, all i had to do was add:
Code:
/dev/sdb2/media/Sharentfs-3guser,auto,locale=en_US.utf800
to the fstab, and it would be mounted on startup, but now i can't do that. when i try to
[code]....
I tried
Code:
sudo mount /dev/sda2
but it doesn't work. i tried
Code:
sudo mount device /dev/sda2
, nope. what are the commands?
I tried few command to mount NTFS system that I know works....but mount LVM with NTFS like this absolutely failed me....
Commands that I tried...
Code:
mount -o loop,offset=32256 /dev/storage/games /windows
mount -o loop,offset=32256 /dev/storage/games5 /windows
mount -t ntfs-3g /dev/storage/games /windows
mount -t ntfs-3g /dev/storage/games5 /windows
[Code]....
Recently installed ubuntu 10.10 and rather like it but been trying to setup and configure everything so its a feasible alternate OS.
I have a problem where one of my hard drives doesnt show up in places.
The drive works fine in windows.
The information provided to me by Disk Utility says:
Model: ATA WDC WD 10EADS-00L5B1
Partitioning: Master Boot Record
Device: /dev/sdb
Partition Type: HPFS/NTFS (0x07)
Now i have a total of 4 drives, windows 7 on one, linux on one, and 2 storage. Linux recognizes my main windows drive and my 2 TB storage drive, but not this one for some reason. I assume it has to do with the partition type? Disk utility just shows its parition bar image as 'unknown' so yeah. Now there is one error during boot related to this but i can't read it fast enough to remember it all, all i see is the sdb label real quick.
We have a VMware box that is connected to a Thecus. The Thecus FTPS the WMware virtual machines onto a PC which has a 2TB drive.
We are trying to see if we can get the FTP'd VMware Virtual machines to run on another WMware node.
However Vmware use's NFS so we can't mount the drive as it's NTFS.
We are attempting to mount the NTFS drive in ubuntu. Can this be done and can it be turned into a NFS share without formatting the drive.
im looking for a command for mounting an ntfs partition. what i want to do is to put that command to the "after startup applications" option. that's because that ntfs partition is my storage partition, i play steam games [win7 dualboot, thats why that partition is ntfs], download movies etc. in my places menu, its called 190GB Filesystem, and when i click it, it mounts up. but that means i have to click it everytime i boot up, because vuze can't locate the files if it isnt mounted.
by the way : /media/7C1EE4E21EE49684 when its mounted
I have a 3T hitachi hard disk partitioned by Windows 7 and formatted as NTFS that I'm unable to mount under Ubuntu 11.04. The disk is in an external enclosure connected via USB2. Windows 7 has no problems seeing the partition and mounting the drive.
[Code]....
On my laptop I have Windows and Ubuntu, and I use Ubuntu very often. How can I auto-mount the NTFS partitions once I run my Ubuntu without the need to manually ask to mount it and confirm with the root password each time and for each partition?
View 5 Replies View Relatedi want to mount at kubuntu startup some ntfs drives now, i have, on dolphin, to click the ntfs partitions to mount them and after doing that, this lines are included on /etc/mtab
/dev/sda1 /media/WD10EADS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdc3 /media/DATOS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sde1 /media/IPOD_HD-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdb1 /media/SAMSUNG401TB-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdd2 /media/SEAGATE-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
but when i add that lines to /etc/fstab and reboot, i can't access the ntfs drives. dolphin says than only "root" can mount /dev/sda1 on /media/WD10EADS (for example) i tried this too:
[Code]....
I have U1004 dual boot with MSW7 and sometimes want to mount those NTFS partitions for mostly reading operations. Ubuntu makes it easy by a single click in Nautilus. How to change this behavior and allow mount NTFS partitions with user's password only, like sudo behavior, for example? In addition, how to mount them read-only?
Note: I mount those NTFS partitions occasionally and there is nothing in fstab about it.
I have a ntfs-partition that I will use for documents for me and another user. I works fine for me.
The partition is mounted and I can read/write.
However, for the other user the partition is not showing up. What to do?
I've tried changing the permissions from nautilus, but no success.
I keep my site files in an NTFS partition.When using Ubuntu, Apache gives me a forbidden 403 error when going to http://localhostI had this problem before, and if i remember correctly, to solve it I had to mount the hard drive as root when starting up, so I had this line in fstab:/dev/sda1 /media/Shared ntfs-3g quiet,defaults, locale=en_US.utf8,umask=000.But having that line there now doesn't make it work. It does mount Shared, and as root, but Apache still gives 403.
View 3 Replies View Relatedi would like to have all my ntfs drives mount @ start up here is the command im currently useing sudo mount -t ntfs-3g /dev/sdc1 /media/D -o forcei have made the folders D E F etc now i know that the command for starting restarting and stoping samba changed in 10.04 so did something change with mounting ntfs drives
View 1 Replies View RelatedHow to mount my external hard drive. The output of
Code:
fdisk -l
was pretty lengthy but I am including all output anyway. The device I am trying to mount is the 1 TB drive /dev/sde. After running fdisk, I ran
Code:
sudo mount -t ntfs-3g /dev/sde /media/myHD
and the output can be seen after the fdisk output (and yes I tried sde1 in lieu of sde).
jfluckey@jfluckey-desktop:~$ sudo fdisk -l
[sudo] password for jfluckey:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x767f767f .....
jfluckey@jfluckey-desktop:~$ sudo mount -t ntfs-3g /dev/sde /media/myHD
NTFS signature is missing.
Failed to mount '/dev/sde': Invalid argument
The device '/dev/sde' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
I can no longer access my external USB hard drive after applying routine updates this morning. It is a WD "My Passport" drive, 500 GB with the standard formatting setup. As far as I can tell there are no errors on it. Upon plugging it in I see a pop-up box "Unable to mount the volume 'My Passport'" and it provides no further information under "Details." If I try mounting from the command line, e.g. mount -t ntfs-3g /dev/sdb1 /media/sdb1 or similar, no errors appear but when I do ls on the directory it comes up blank. Also then if I try to unmount it, it tells me the drive isn't mounted. This drive mounts fine on another computer running Fedora (and all the data on it is readable). I'm guessing there is a bug in one of the updates--here is what updates I applied.
Commit Log for Fri Mar 11 18:09:25 2011
Upgraded the following packages:
avahi-autoipd (0.6.22-2ubuntu4.2) to 0.6.22-2ubuntu4.3
avahi-daemon (0.6.22-2ubuntu4.2) to 0.6.22-2ubuntu4.3
firefox (3.6.14+build3+nobinonly-0ubuntu0.8.04.1) to 3.6.15+build1+nobinonly-0ubuntu0.8.04.1
firefox-3.0 (3.6.14+build3+nobinonly-0ubuntu0.8.04.1) to 3.6.15+build1+nobinonly-0ubuntu0.8.04.1
[Code]....
I use Ubuntu 11.04 (gnome) and have a ntfs partiton that shows up in the "places" menu that is normally in the gnome panel. But I think that partition isn't mounted till I click on the entry in this menu (when I want to access it from any other place, shortcuts for example, that doesn't work).
How can I correctly mount all partitions I want on startup?
Recently I tried something in the /etc/fstab file but don't know if this is correct...
My Host OS is XP and I am running Ubuntu on Virtualbox. Trred a readwrite and graphic method to mount NTFS but no matches, permission denied. It's not possible to mount NTFS using Ubuntu on Virtual box?
View 7 Replies View Relatedi use Ntfs 3g for auto mounting my windows partition. but for some reason i want to get it unmounted on boot.but when i get into the NTFS config tool i cant figure that out.
View 2 Replies View RelatedEarlier i had windows 7 in my hard disk, somehow it got corrupted. Over that i installed ubuntu linux 10.04. I am having a live CD, before installation during the live mode, i was able to see all the NTFS data (windows 7) available in my hard disk. Then i installed Ubuntu 10.04 on the same hard disc. Now under the menu places->Network->windows network. When i double click on this icon, Linux is throwing an error "Unable to mount location failed to retrieve share list from server" and not showing any files. Am having 320GB capacity hard disk. I tried using Getparted to find NTFS partitions, but i could see only the following, where NTFS is missing
Partition type Filesystem Mount point Size Used Unused Fl
------------------------------------------------------------------------------------------
[code]....