Ubuntu Installation :: G++ _4.4 Installation - Errors

Oct 16, 2010

Recently, I have installed ubuntu 10.4. I am going to install g++_4.4 but I am facing with errors. I have tried three types of installation so far.

When I am trying to install g++ by using ubuntu software center I am facing with following error: "This error could be caused by required additional software packages which are missing or not installable. Futhermore there could be a conflict between software packages which are not allowed to be installed at the same time."

When I am using synaptic package manager

g++-4.4:

And when I am going to use the following command in Terminal

sudo apt-get install build-essential

I faced by following error:

View 1 Replies


ADVERTISEMENT

Ubuntu Installation :: Re-installation - Updgrade Crashed - Errors With Unity Crashing Every Time When Open A Terminal

May 18, 2011

I upgraded to 11.04, but the updgrade crashed, and now it has some errors with Unity crashing every time I open a terminal. Is there any way to re-install without having to reconfigure all my programs? I am running a dual-boot.

View 3 Replies View Related

Ubuntu Installation :: Installation Errors And Boot To Console Always

Apr 29, 2011

I installed and then reinstalled UBUNTU 11.04 /x86 server into clean HDD1. It was done however with errors and boots in console tty mode

After the last installation there was message regarding 4 errors

Then login prompt.

Configuration:
Intel Pentium 4/2,4 MHz, 512 RAM
Graphic card GeForce 4 MX440 /AGP8
2 HDD (HDD0- 230 GB Windows XP+GRUB, HDD1-180 GB UBUNTU 11.04)
CD ROM Plextor, FDD
GRUB boot to UBUNTU

View 3 Replies View Related

Ubuntu Installation :: Two Different Boot Errors With 9.10?

Mar 30, 2010

I'm having two distinct Grub boot errors with Ubuntu 9.10, stemming from two different setups. Anticipating that I'll be asked I ran BootInfoScript on both setups. This is the first setup, where I put a Flash ROM card in the Flash ROM port in front of the computer. This setup will not boot at all, and I get a message something like "Insert appropriate media and try again."

[Code]....

View 2 Replies View Related

Ubuntu Installation :: Upgrade 8.04 To 10.10 - Errors ?

Jan 12, 2011

I am trying to get Ubuntu 8.10 upgraded to Ubuntu 10.10, I'm having all sorts of errors:

Code:

While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.

Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'hardy' to 'lucid' entries. If you select 'No' the upgrade will cancel.

Continue [yN] After pressing yes

Code:

View 4 Replies View Related

Ubuntu Installation :: Apt-get Errors For Autofs

Feb 2, 2011

Tried to update autofs feature. As per this link: [url]

I tried

I get error:

I get similar errors when trying to update some other packages as well. Is there a location where the packages are ?

View 2 Replies View Related

Ubuntu Installation :: 404 Errors While Updating

Feb 8, 2011

I went to update today and got these errors. Anyone else getting these?:

Failed to fetch http://us.archive.ubuntu.com/ubuntu/...tu1.2_i386.deb 404 Not Found [IP: 91.189.88.46 80]
Failed to fetch http://us.archive.ubuntu.com/ubuntu/...ntu1.2_all.deb 404 Not Found [IP: 91.189.88.46 80]
Failed to fetch http://us.archive.ubuntu.com/ubuntu/...tu1.2_i386.deb 404 Not Found [IP: 91.189.88.46 80]

Now, what can I do to resolve this?

View 2 Replies View Related

Ubuntu Installation :: Cannot Upgrade To 11.04 Errors

May 4, 2011

I receive the following errors every time the upgrade option appears and cannot get past it.

W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/...ty/Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname)
, W:Failed to fetch http://security.ubuntu.com/ubuntu/di...ty/Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname)

[code]....

View 3 Replies View Related

Ubuntu Installation :: 9.10 / Can't Get Updates / Getting 'crash Errors'

Jan 10, 2010

1 month ago we bought this computer. It has a GS7610 motherboard, AMd Athlon 3000+ with 2 gig ram, Seagate 500Gb HD and that's it.

I installed 9.10 64 bit, and all was flawless. Worked straight away, no troubles at all.

Then it was telling me the HS had bad sectors, so we took it back to the store today, and they said there was no problem. They also said that the vertical fuzzy lines were an OS problem, when we thought it was a monitor problem.

They also said that installing Windows would solve the problems.

Ok, so I went through the motions of trying to install a proper copy of Win7 pro I have here, and that went ok, albeit annoying

So, back to Ubuntu and did a full, clean re-install of 9.10 64 bit from the same CD I originally used that worked perfectly.

All installed, and I am hitting serious troubles.

There is a network connection, and I can ping anywhere with a small packet. Anything bigger, no go. I can bring up google, but no further. I can't bring up Ubuntu.com. I can't get updates, so even if they would correct the problem, it doesn't matter because I can't get them into the box.

It can download some updates, then finds one that it can't swallow and just locks up. I am also getting 'crash errors' that aren't a good thing.

It worked just fine, and now it's not.

I have searched and re-installed for the past 8 hours straight and still nothing.

I have this here box running 8.04 that just keeps ticking flawlessly, so it's not an update issue. I am here, so it's not a network or internet issue. Win7 got the internet just fine (sans sound).

I am almost willing to just accept Win7 without sound because at least it's something more than a non-updatable Ubuntu.

(And FWIW, you name anything that has been already said to fix the problem, I have already tried it at least twice already...)

Just re-installed for maybe the tenth time, and this time, for whatever reason, it is working just the way it was originally, and it even has the static on the screen going flat out, which I would really like to know how to solve...

Even got it dual booting with Win7 without effort.

View 9 Replies View Related

Ubuntu Installation :: Get A Long List Of I/o Errors

Jan 20, 2010

The image disk boots OK and comes to the screen that gives the option to try or install. I opted for the "try Ubuntu" once, but got a long list of i/o errors. Tried the install option, and same thing. The install did get to an apparent Ubuntu background, but never any further prompts. Is the iso bad? I'm trying to install on a Dell Inspiron 7500. Currently has Win2000 loaded.

View 4 Replies View Related

Ubuntu Installation :: 0.04 Alpha Updating Errors ?

Apr 11, 2010

I get these from a Synaptic "Mark All Upgrades" and "Appye".

Code:

View 4 Replies View Related

Ubuntu Installation :: Upgrade To 10.04 LTS From 9.10 - Errors Began To Pop Up

May 1, 2010

I decided to upgrade to Ubuntu 10.04 LTS from Ubuntu 9.10 earlier today. I started the upgrade process, after around 4 hours everything was starting to install. But then certain errors began to pop up. Soon after, the upgrade dialog exited because of too many errors (a screenshot is attached below with other documents).

Right now I have to back up by files and do a fresh reinstall.

Icons are all over the place, some have been deleted, and application menus are "scrambled". Nothing really seems to work except my web broswer, Opera, which isn't a Canonical Ubuntu application.

I have attached to screenshot of the upgrade dialog and the other documents the error dialog wanted me to attach.

View 1 Replies View Related

Ubuntu Installation :: 10.04LTS - Errors After It Ejects The CD?

May 3, 2010

I just purchased a HP G2-144DX.

Ubuntu 10.04 installed like a charm (I only need to find out why the headphones work but the main speakers do not), but at the end when the procedure ejected the CD, I immediately got:

I/O Error on Device sr0

repeated over and over for a couple dozen blocks.

I did a hard reset and the system is acting normally, but I'm wondering if other people have had the same problems?

Also, when running glxgears, is a score of 3000 normal for the Intel GMA HD video chipset?

View 3 Replies View Related

Ubuntu Installation :: Getting Errors When Trying To Fix FGLRX / Sort It?

Jun 27, 2010

A few weeks ago either after the upgrade to 10.04 or on a subsequent system update I have been having problems. I have not been able to use Compiz Desktop Effects and playing videos in full screen is awful slow and choppy. I have tried numerous things to try and fix this and now at this point whenever i try anything through the terminal I get the following error.code...

View 5 Replies View Related

Ubuntu Installation :: ACPI Errors - How To Run Script

Aug 11, 2010

I'm a total Linux newb, and I seem to have got the wrong laptop for that. An L505D-GS6000. Apparently, it's hard to install linux on it unless you do some things (it stops with a bunch of ACPI errors. I found a solution, but I have no idea how to do it.

To summarize:
for L505D GS6000
Install 10.4
Boot with pci=noacpi
Run HexOr's script found here: [URL]
Get wifi drivers from here [URL]

I have 10.4 working on my Toshiba Satellite L505D GS6000, with everything fine, power controls, trackpad, wifi now." How do I boot with pci=noacpi? How do I run a script?

View 3 Replies View Related

Ubuntu Installation :: Configuration Errors Appeared?

Aug 12, 2010

Recently my beloved ubuntu setup died and I'm struggling to fix it.One day I turned it on and I received the following message:"Your screen graphics card and input device settings could not be detected correctly'Attempting to continue with the recommended lower graphics settings does not work and I am not sure where to go from here. Sometimes it will advance at the lower graphics setting until an error regarding the configuration defaults for the GNOME power manager that have apparently not been installed properly.I didn't change anything and my windoze partition works well. Running Lucid Lynx with nvidia graphics card and ndiswrapper.Other error messages are:(EE) [drm] failed to open device(EE) Failed to initialise GLX extension (Compatible NVIDIA X driver not found)If I reinstall ubuntu will I lose all my programs and data?

View 7 Replies View Related

Ubuntu Installation :: Over Old XP Install - SQUASHFS Errors

Jan 19, 2011

I'm installing 10.10 on another laptop (after successful and enjoyable install on previous laptop) but am running into some snags:

-Inserting 10.10 disc I got in the mail from Ubuntu, laptop boots from CD as it should, logo pops up and install begins.

-Start getting a string of error messages, most of which are the "SQUASHFS" errors.

Is this an issue with my XP configuration? Would I be better suited to format the HD and erase XP and start from there?

View 1 Replies View Related

Ubuntu Installation :: Getting Errors From Update Manager?

Jan 30, 2011

I get errors when I install applications..including errors from update manager when I do a regular update.

Code:
installArchives() failed: Selecting previously deselected package linux-image-2.6.35-25-generic.
(Reading database ...
(Reading database ... 5%

[Code].....

View 1 Replies View Related

Ubuntu Installation :: How To Start MySQL In 11.04 Without Errors

Aug 4, 2011

I am new to ubuntu. I want to start mysql but its not working! error occurs!
"
root@drazer-GA-MA785GM-US2H:/etc/init.d# mysql.server start
mysql.server: command not found
root@drazer-GA-MA785GM-US2H:/etc/init.d# mysql
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
root@drazer-GA-MA785GM-US2H:/etc/init.d# mysql start
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
root@drazer-GA-MA785GM-US2H:/etc/init.d#
"
I have installed mysql client and server packages.

View 4 Replies View Related

Ubuntu Installation :: Boot Errors / Resolve This?

Aug 21, 2011

I've had a lot of success over the past year with Ubuntu 10.4; however, recently I've been experiencing nothing but problems. It all started with an upgrade a month ago that caused me to experience a boot error. Now every time I re-install the system, I will have a random boot error. I have been trying to install the system on a friend's computer and getting the same thing. I've tried a different download and burned different discs, but I am still experiencing problems with the system having a boot error. Sometimes it is immediate after installation and other times it might boot fine for a day or two and then suddenly it will no longer boot. Is there some kind of bug with 10.4 now? I never, never had this hard of a time with Ubuntu. I've installed it on several computers for myself and other people.

View 1 Replies View Related

Ubuntu Servers :: Xorg-common (Installation Errors?

Jan 5, 2010

I have setup the Ubuntu server on Dell Powerdge 2900 (the latest server version 9.XX)I would like to install the 'minimal' X11 package so I have done the following Step1:Quote:

$ dpkg -l x11-common
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend

[code]....

View 6 Replies View Related

Ubuntu Installation :: Getting Errors Installing At - Aptitude -f Install At

Jan 19, 2010

The following packages have been automatically kept back:

The following packages have been kept back:

View 1 Replies View Related

Ubuntu Installation :: 9.10 - Cannot Install Bootloader Getting Continuous Errors

Feb 22, 2010

I have a new computer with two 500 gb hard drives which I use in raid 0. I tried to install Ubuntu 9.10 off the live cd but it was unable to partition the raid and kept failing. I was then told top use the alternate cd. I use that and my raid is detected, partitioned, and the system is installed. However now I cannot install a boot loader as I get continuous errors. Right now I am left with no ideas with what to do. I have Ubuntu installed to my hard drives just no way of accessing it.

View 2 Replies View Related

Ubuntu Installation :: Errors And Splash Change After Update?

Mar 28, 2010

Ran update manager and install some updates. After it asked me to reboot, I received the following message before splash: "mountall could not connect to plymouth", and the splash screen now says "mythbuntu". What?

Version 10.0.4

View 3 Replies View Related

Ubuntu Installation :: Tons Of Errors Upgrading From 8.04 To 10.04 LTS - Cannot Utime

May 12, 2010

I upgraded to 8.04 on AMD64 machine. I started to upgrade to 10.04 LTS using the System -> Admin -> Update manager. After packages started installing began getting MANY error popup windows saying dpkg exiting with errors. Looking at the terminal window I see a lot of "cannot utime" and it appears to be some error with tar. I saw on another forum that Lucid has a bug with tar. Now the distribution upgrade has just locked. What should I do?

View 6 Replies View Related

Ubuntu Installation :: Strange Mounting Errors After Upgrade?

May 16, 2010

I upgraded a linux box from Koala to Lucid, and everything seems ok except at boot I occasionally get an error mounting some partitions. Here is the boot.log:

Code:
fsck from util-linux-ng 2.17.2
/dev/sdb1: clean, 316325/17965056 files, 5723474/71844680 blocks
udevd[402]: can not read '/etc/udev/rules.d/z80_user.rules'
mount: /dev/sdb1 already mounted or /backup busy
mount: according to mtab, /dev/sdb1 is mounted on /

[Code]...

View 2 Replies View Related

Ubuntu Installation :: Errors While Launching Gedit From Console

Jun 23, 2010

I am running ubuntu 10.04 . I recently installed gmate plugin package for gedit. It was working like a charm then. The next day I did a large update & when I launched gedit from console again, it was throwing tons of warning errors & assertion failures for every action. Though I could do all things without any obstruction.I deselected all the plugins & launched it again- this time it worked clean. I have resinstalled gedit & gmate packages but still with plugins on , I get dirty console screen.

View 2 Replies View Related

Ubuntu :: GNOME Power Config And Installation Errors

Oct 12, 2010

A couple of days ago on my Fujitsu Laptop which was nearing its end (in about 2 more years, I'll have to send it to the scrap pile) I had a GNOME Power Configuration error. This is the story of my struggles and my thread of cries for help: I was booting after installing an update for Maverick Meerkat, and I got a message during the load screen that said: INSTALLATION PROBLEM: The configuration defaults for Gnome Power Manager have not been installed correctly. Please Contact your system administrator.

So I dropped into GRUB During my 5th boot (while trying to boot once more in hopes it was just a boot error) and I selected the latest/updated version of Ubuntu, but I dropped into the recovery mode version so I could attempt some commands to try and fix it. Then, I dropped into the root terminal to attempt more commands to avoid specifying my networking device, and typing sudo before the commands. I got on my alternate computer and searched my problem. I installed a whole bunch of crappy commands that didn't do anything, and ended up purging GNOME completely and doing:

[Code]....

View 1 Replies View Related

Ubuntu Installation :: Gdm/gconf Errors After Fresh Install?

Nov 11, 2010

I did a fresh install of Ubuntu 10.10 i386 on Asus EeePC S101 (1GB RAM, 32GB SSD). On the first boot of the freshly installed system I get 2 error popups several seconds after the screen goes into black graphical mode:popup 1:

Code:
Could not update ICEauthority file /var/lib/gdm/.ICEauthority
After I close that popup, I immediately get another:

[code]....

View 2 Replies View Related

Ubuntu Installation :: Dpkg Errors After Updgrade To Maverick

Nov 15, 2010

I am experiencing the same issue, with the same package, as the user from this "solved" thread.URL...My question comes as this... the fix was to change the package name to one without underscores in it. The underscores were changed to tildas. What I don't understand is where I make those changes.Crisnoh said that he tried commenting the package out of the 'file' but that didn't work. However, changing the file name to tildas did... so which file am I supposed to be editing to change these underscores to tildas?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved