Ubuntu Installation :: Upgrading To 10.04 Failed?
May 22, 2010
I went to upgrade from 9.10 to 10.04 and it wouldn't upgrade. This is the error:
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
I looked for the same errors on here and on the Internet and these were some solutions, but they did not work (I included the errors form the solutions)
1. I tried in the terminal to apt-get clean, sudo apt-get -f install and this is what I got:
E: Could not open lock file /var/cache/apt/archives/lock - open (13: Permission denied)
E: Unable to lock the download directory
View 4 Replies
ADVERTISEMENT
Oct 31, 2010
I'm trying to upgrade from 9.1. Originally I was using update manager, but the upgrade failed. Now I have a big icon red with white line on the top toolbar. When I hover over it, it tells me to run Package Manager in order to fix Broken Packages. However, that doesn't work. If I try to run the upgrade again I end up being told to use the terminal and run sudo apt-get install -f. When I do that I get the following ...
[Code]...
View 8 Replies
View Related
May 8, 2010
I'm trying to upgrade everything on this computer to the release Lucid, and am getting errors retrieving some files, here's a sample of one of the errors, (the rest are very similar)
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.88.31 80]
View 2 Replies
View Related
Sep 21, 2010
I've just upgraded from ubuntu 9.10 to 10.04 64 bit, and everything went well except for the fglrx driver installation, which failed. I've checked the troubleshooting guide and tried to purge the drivers, with only partial success.
When i type dpkg -l '*fglrx*'
I get this,
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
[code]....
View 7 Replies
View Related
Oct 20, 2010
i used to use ubuntu 9.04 on my lap compaq 515, it worked well. But on upgrading to the higher versions(9.10, 10.04) the system failed to boot. Whenever i tried to install, the laptop would freeze and just show a blank screen. The Configuration of my system is below
Processor-AMD Athlon X2 64-bit
RAM- 1.7Gb
HDD- 150Gb
Graphics Card-ATI Radeon 3200 HD Graphics (256MB)
Is the problem actually with the operating system?. Does the new versions of ubuntu support this configuration or not?
View 2 Replies
View Related
Mar 10, 2010
I have an old 8.04.02 installation that I would like to upgrade to 9.10. I'm trying to use the incremental upgrade path: 8.04 -> 8.10 -> 9.04 -> 9.10. Unfortunately, that computer can't use the internet for some reason, so I have to use the alternate CD. (A partition with a fresh 9.10 installation can use the internet just fine, but I want to carry over everything from the 8.04 installation into 9.10 -- and finally use the internet again). I tried following the directions at https://help.ubuntu.com/community/IntrepidUpgrades . I inserted the disc and went through the automatic upgrade dialogs. After clicking "No" on the "Include latest updates from the Internet?" dialog box, the upgrade starts then instantly returns this error message:
Failed to add the CD.There was a error adding the CD, the upgrade will abort. Please report this as a bug if this is a valid Ubuntu CD.The error message was:'Unable to locate any package files, perhaps this is not an Ubuntu disc or the wrong architecture?'I get the same thing if I try this on the command line: gksu "sh /media/cdrom/cdromupgrade"I checked the architecture. My computer uses amd64 and the alternate CD is for amd64.I got the disc image fromso I think it's a valid Ubuntu CD.PS: Also posted as a bug report at https://bugs.launchpad.net/ubuntu/+bug/534240 I'm just hoping someone has either experience or a workaround that can get me on my feet again.
View 2 Replies
View Related
Sep 29, 2010
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies
View Related
May 30, 2010
I installed Lucid (clean install after several attempts at upgrading from Karmic failed), and I have an Intel 8xx video card. I was able to get Lucid installed by adding "xforcevesa" into the command line at startup. Now I would like to try changing my computer away from Vesa and seeing if I can try to get the i915 driver working.
That being said, I cannot figure out where to go to change my kernel boot configurations. Every tutorial I've found refers me to /boot/grub/menu.lst which I cannot find. Ever since I moved from Karmic to Lucid, I've regretted it as it seems like all the How-To documentation is no longer valid, everything has been changed and moved around.
I don't know why it is dumping me onto Vesa, or why my stupid driver was blacklisted; everything was working fine under Hardy, Jaunty, and Karmic. Why problems now? Does anyone know how I can get into my boot setings and replace "xforcevesa" with something that will make the intel driver work?
View 3 Replies
View Related
Oct 29, 2010
I was recently watching an avi file, when suddenly, my tower (the computer) got really, really noisy. That's pretty normal when I'm on my Windows side, but very unusual for Ubuntu Linux. I knew something was in the wind then and there. So I exit my Dragon Player to discover that ! gasp ! KDE is down, replaced with the default wallpaper for GNOME, and no bars anywhere. I reset the system only to find that it refuses to boot into either KDE or GNOME. Having been in something similar to this situation before, I decide that Xorg.conf must be broken somehow. In an effort to get to the GUI where I can safely edit it, I try reinstalling KDE and GNOME, which both failed.
So I try installing xdm...which results in only being able to access the login screen for XFCE. Whenever I try to log in using the correct credentials, it simply refreshes the log-in screen.
1. Is this, indeed, the sign of a broken Xorg.conf, or a broken Xserver in general? Or is there something larger that was changed?
2. How do I fix this? (I've already tried using Ubuntu 10.10 64 in rescue mode, but I can't seem to change anything in the system itself.)
3. Is this possibly a result of upgrading straight from 10.04? Is it possible that having both KDE and GNOME contributed to this?
View 1 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
Jan 30, 2010
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
View 9 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Mar 4, 2010
I've just installed 8.04. and I was googling on the net and saw that there's a more new version 9.10 is it? So I tried following the guide on [url]
View 6 Replies
View Related
Mar 9, 2010
I'm trying to do the upgrade but get the following error:
Quote:
root@server:~# do-release-upgrade
Checking for a new ubuntu release
Done Upgrade tool
Done Upgrade tool signature
Done downloading
[Code]....
View 2 Replies
View Related
Apr 30, 2010
I've had the 10.04 installed on a notebook for about a week now and I want to upgrade to the LTS that was released today. When I go to check updates it shows me that everything is already updated. How can this be? Is there another way to upgrade from RC to LTS that I don't know about?
View 5 Replies
View Related
Jun 16, 2010
Installed 7.04 on a toshiba satellite M115 Laptop. I want to upgrade to 10.04. Made a boot disk and tried to launch but 7.04 always opens. How can I get this upgrade done?
View 9 Replies
View Related
Jun 24, 2010
I am upgrading to Ubuntu 10.10 Alpha 1. This is on my gaming machine so I can test it and if it screws my system up, I can reinstall. I have not seen any issues so far. I think there might be a thread already open for talking about 10.10 but I am creating this thread anyways.
The upgrade is going faster than when i first did the upgrade earlier this month.I am testing Ubuntu 10.10 on a computer with a 1.6Ghz AMD 64 processor.It has 3 GB ram and a 500GB hard drive. 128 MB video ram.
Note: This is The emachines EL 1200-06w I am using a Belkin wireless card which is only able to be used with the help of Windows Wireless Drivers (ndiswrapper).
I plan to report bugs in launchpad. Last time, Ubuntu could not start after an update. Now, I am risking down time by using the Alpha version again. I am installing by going to: Applications -> Accessories -> Terminal In Terminal, I enter in
Code:
sudo update-manager -d and then it asks for a password to open update manager. Then it shows the upgrade is available. I am still at the process of upgrading the computer. I am running Ubunut 10.04 32 bit at the moment.
UPDATE: I didn't need ndiswrapper, and I am able to now use Natty, where it works as it should.
View 2 Replies
View Related
Oct 23, 2010
Recently I wanted to install Ubuntu 10.04 from a CD which I had sent to me, but which I never actually used. So I put the CD in my laptop, used Wubi to install Lucid Lynx next to Windows in dual-boot, and restarted the laptop. Everything was OK. I noticed that the Update Manager didn't come up yet. I glanced at the notification area, and I wasn't connected to the Internet. So I entered wireless connection password and so Internet was back.I then opened Update Manager, changed release options to "Normal Releases" and was told of upgrade to Ubuntu 10.10. So I pressed the button, successfully updated and restarted. BUT, when Ubuntu tried to reboot, it gave a whole list of errors, and proceeded to shut down. Right now I'm manually downloading 10.10 64-bit, and Wubi. And I uninstalled previous installation. If this works, then great. But I still want to know, just out of interest, why the hell did it do that? Is there issues with the upgrade? Was there errors in my Ubuntu installation?
View 1 Replies
View Related
Nov 28, 2010
I have perfectly working Ubuntu 10.04 on my Dell Vostro 1500 laptop. But, yesterday I upgraded it to Ubuntu 10.10. There were various error messages during upgrade process, but it showed that I can continue without certain package. But, after restarting the laptop, I didn't found the new kernel entry in the GRUB. So, I continued with booting using older kernel version. It showed that ubuntu is booting but after sometime screen went totally blank. I even tried to boot into recovery mode, but faced same problem.
Then I booted with live CD, and chroot to the root folder of ubuntu on my HDD. After running command "dpkg --configure -a" I got error messages which are stored in attached file error-msg.txt.I cannot format the linux partition for a clean install. Please suggest solution for either recovery of 10.10 or restoration of 10.04.
View 9 Replies
View Related
Dec 26, 2010
I currently have Ubuntu 9.04 Installed and everything works perfectly. Its no longer allowing me to do the automatic updates saying my distribution version isnt supported anymore, and want to upgrade to 10.10.
When version 9.10 came out I upgraded through the Update Manager, and it screwed up the install and nothing worked. I ended up deleting everything and started from scratch. I dont want to go through that again.
I was wondering the easiest way to upgrade to version 10.10, because even the Update Manager only gives me the option to upgrade to version 9.10
View 7 Replies
View Related
Apr 7, 2011
I have an acer emachines netbook and I am looking to upgrade from 9.10.
View 3 Replies
View Related
Apr 16, 2011
I have what it may seem to most of you a nooby question but it is the first time for me that a new version of Ubuntu comes out, so I want to know if I will have to do a new "clean" installation of 11.04 when it's released or will it be some sort of upgrade from software center. If I have to do a new installation is there a way to reinstall all the programs I have all at once or maybe take a backup of them or will I have to install them all one by one?
View 3 Replies
View Related
Apr 29, 2011
I am trying to upgrade from 10.10 to 11.04 and I have Failed to Fetch error. I tried to change Download Server but it didn't help.
View 1 Replies
View Related
May 3, 2011
I found no similar threads so I created a new one.
I have w7 and ubuntu on a dual boot arrange. I need them both and I need ubuntu to see my files in c:.
Life was fine before the upgrade, but now I just can't see my c: drive.
View 9 Replies
View Related
May 7, 2011
Is it possible to accomplish this? Or do I have to install each subsequent version until I reach 11.1? When I run the update manager it never informs me of a new release.
View 7 Replies
View Related
Feb 26, 2010
While upgrading from 9.04 to 9.10 using Alternate CD, the OS crashed. I had updated the 9.04 with latest updates and then started the upgradation to 9.10 using a Alternate CD. But after some time, the computer resarted and the screen displayed six line of 9.04 startup line. I waited for ten minutes but nothing happned.
What can be the reason and what should be done in that situation.
View 5 Replies
View Related
Mar 22, 2010
I'm upgrading from an AMD XP 2300 chip on an ECS motherboard to a intel i5 chip on a ASUS motherboard. I was wondering if I will encounter any problems or if the system will work right away without reinstallation.
View 2 Replies
View Related
Mar 25, 2010
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
View 2 Replies
View Related
Apr 29, 2010
I'll probably be taking my netbook up to Lucid here in a few days. My question is if I should bother with the Netbook Edition or just get the standard edition? Are there any packages in the netbook edition that can help with processing, power, etc on a netbook? More importantly, can the special netbook desktop be turned off in favor of the standard UI?
View 9 Replies
View Related
