I recently upgraded a program from a PPA to the latest version and there seems to be a regression.
How can I revert back to the version I had installed, now the second-but-latest version from PPA?
Two weeks ago I consumed all available FC13 updates. It was a terrible mistake. After that my my PC does not function properly and I have no clue how to fix it. I would like to get my PC in the previous (healthy) state. Is there an easy way to undo the updates? More than 60 packages were updated, but I do not remember which ones.
View 11 Replies View RelatedIf one accepts an update of a specific package via apt and decides the update isn't desired, what does one do? In other words, what is the most sensible and relatively easy way to rol-back to the previous version of that specific package without affecting anything else (dependencies aside of course).
I want to do this with a recent adobe plug in.
I recently upgraded the kernel in 9.10 to fix a problem of no sound on my laptop but this killed wireless However I could still boot into the previous kernel to use wireless (albeit without sound). I found a fix for this problem on the forums: [URL]... but It didn't work so well in my case. Specifically after executing the command
[Code]...
If anyone knows how to undo the rmmod dell_laptop command or has some insight into what I might be able to do let me know
please provide solution to [URL]I have updated ubuntu 10.4 to 10.10 and VLC get crashed. Now I am not able to do uninstall/ install VLC or any other software/updatehere are things I have tried but no use.
Code:
sudo apt-get clean
sudo apt-get autoclean
[code]....
I am trying to get Ubuntu up and running on my Dell XPS 400 desktop. I verified the checksum of the iso (ubuntu-9.10-desktop-i386.iso) I downloaded, and I ran the cd check before installing. I also ran a memtest for 16 hours with no errors.
So I install Ubuntu, and everything seems ok. Now, I try to update my software packages, and the upgrade always fails after all the packages are downloaded (sometime during actual installation). So, I have to reboot, and the file system will not mount. I run fsck and reboot, and now I cannot even boot normally or to a shell... This has happened to me twice in row.
What is the best plan of attack when a package fails to install midway? I want to use Ubuntu, but this is making it pretty hard.
I tried to upgrade my pc from 9.10 to 10.04 version with the alternative cd as the update manager was not showing the new release. There were some problem in installation and the process stopped somewhere. Then, when I tried with the update manager I got some error.
View 9 Replies View RelatedI'm running Lucid, and after one apt-get upgrade I get hangs with the mysql package: Preparing to replace mysql-server-5.1 5.1.41-3ubuntu11 (using .../mysql-server-5.1_5.1.41-3ubuntu12_i386.deb) ... no matter what I do I can't get it to remove or install the mysql package. I've tried doing:
sudo dpkg --remove --force-remove-reinstreq mysql-server-5.1 but even that just hangs forever. I just want to remove the package so I can install the other updates
I've only been using Linux for a few days (Specifically - I installed Ubuntu 9.10 last week on my laptop for learning the OS and updated to 10.04 over the weekend). I have searched Google (and found answers) for every problem now except for this new one. I apologise in advance for the length but I wanted to include my own troubleshooting as well.
When I installed and setup Ubuntu Karmic - I added my work software. Autopackage wasn't installed by default so I used terminal's package install <filename> command for the first file - and double clicked on the rest to install.With the OS change I wanted to check to see if these packages would have problems installing on 10.04 (mostly to double check).First I checked my Manage 3rd Party Software to remove them - but all my entries here are blank. (I should have quite a few actually - I've done a lot of installing and downloading in the last few days).I double clicked to re-run them but that failed saying there was a problem with the packages. So I swapped to Terminal and found the following:
When I try to install a software package:
sudo package install "SMART Product Drivers 10.package"
Reply: package: can't open config file /home/test/.mailagent
If I type in just
[code].....
What's interesting, is checking my Fedora and Debian builds (I've done a lot of learning for only a few days! But I know a ton about grub 1 and 2 now) - I can't see a /home/test/.mailagent file or folder to copy either. The only thing I can think of is I have never setup an email account on my system (I've only been using it for a few days) and maybe the blank Manage 3rd Party Software tab is indicating a different problem.
I'm looking into upgrading my laptop from 9.10 to 10.04, but before I do I wanted to find out if I can limit the number of packages the system must install for this purpose. I began the process to upgrade, and the wizard informed me that on top of package upgrades, 288 packages needed to be downloaded, for a total well over 1GB of downloading. While my internet connection can support this, I don't feel the need to install 288 packages, most of which I'm certain I will not be using, nor will most of these be dependencies for things I do use.
In short: can I pick and choose what gets downloaded and installed in the upgrade? I've asked this question before, and somebody said the answer was 'yes', however I see nowhere to control this. No buttons, no config files.
Is there a way of excluding a software package when issuing the 'apt-get dist-upgrade'command? For example the newer 'pm-utils' packs are incompatible with my hardware and my laptop starts to glitch. What I do is I uninstall and replace the package every time I run 'sudo apt-get update && apt-get dist-upgrade'. Which is kind of annoying. I know that you can hide updates from the update manager, but what about the terminal? I'm sure there are codes like "dist-upgrade [except pm-utils]"
View 2 Replies View RelatedIn the "software sources" windows under the "Updates" tab I have checked "Pre-released updates" and installed all the updates. I no longer want to track the proposed updates and have unchecked that item. Now am back to just security and recommended checked. How do i get it to downgrade the packages that it has modified when I had "Pre-released" checked? I want to get back on the stable "Recommended Updates". It seems to have changed what it looks at for updates but did not downgrade the packages.
View 1 Replies View RelatedI've tried to update Audacious 2.1 to a version, 2.3, that isn't yet on Karmic or Hardy repositories, by adding a PPA to my software sources through this line:
Code:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update && sudo apt-get install audacious
[code]....
I seem to have a small problem. Since september, i hooked up an old Acer laptop (with just 560 RAM and a 16 mib graphical card) to a computer screen, a keyboard and a mouse, so that i had an extra 'computer' for my mother to use. Old people prefer bigger screens to ponder upon.
But anyways, each time i want to update or upgrade the 9.04 Ubuntu distribution, it freezes. This is quite annoying since i really want it to upgrade to 9.10, for possible faster results.
My normal update/upgrade of packages on a LAMP server (Ubuntu 10.04) for my business has resulted in the following error:
Code:
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.32-24-generic-pae /boot/vmlinuz-2.6.32-24-generic-pae
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 10
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.32-24-generic-pae.postinst line 1003.
[Code]...
I have recently upgraded to Ubuntu 11.04 from Ubuntu 10.10. After the upgrade, I wanted to do a system cleanup using Synaptic Package Manager. After, I have marked a package for removal, the "Apply" button is still shaded, i.e., I am not able to click the "Apply" button. The "Apply" button is still not functional even I am able to download and install packages.
View 2 Replies View RelatedI,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies View RelatedAll of a sudden when I ran an update with the usual
Code:
sudo apt-get upgrade
I got an input / output error for a specific file followed by an exit with dpkg returning error code 1.
In this case the package (ubuntu-docs) is not exactly life threatening, so I would prefer any update process to simply skip that particular package and move onto the ones that are getting held up. I then opened Synaptic Package Manager where I located the erroneous package. I then unmarked the particular package (ie the blob in front of the package name was green, and the status line shows zeroes for all categories (broken, upgrade/install, remove). So far so good. I then found the 'lock version' menu item under the packages menu. I clicked it, and ran the reload thing. After that thought the package was marked for deletion however, and I once again couldn't get by this one bad package.
So (tl/dr perhaps), how can I make Synaptic / apt-get / or whatever to skip this bad package for real so that I can update my system normally going forward? (Why is it that the whole upgrade process is that fragile by the way? Surely there must the the occasional dud package upgrade that people want to skip, no? Having the whole process grind to a halt because of one issue seems border line paranoid to me. Of course on a minimal server installation where every package counts this behavior makes sense perhaps, but on a IMHO bloated plain vanilla ubuntu install?
I have upgraded my Laptop from Fedora12 to Fedora 13 via DVD image (x64 version). After the upgrade, I tried to update via YUM every package that still needed upgrade (especially nvidia drivers), and I got
[Errno 14] Could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-nonfree-fedora-13-x86_64
So, I tried to delete and reimport the rpmfusion repos, but when I go to this page:
[URL]
and try to install the RPMs, it only allows me to open them with Archive Manager!
So I looked into GNOME menus and... damn, apparently I can't find Package manager anymore!
Where did it go? and more importantly, why can't I install RPMs anymore? Can anyone enlight me on what went wrong?
Being the fool that I am, I forgot the good old terminal. I have still to nail down in my brain that going by terminal always works better than GUI. Using RPM -Uvh I managed to re-import all repos whose GPG key wasn't signed, and so I finally can upgrade my packages.
Package Manager is missing from GNOME. I have a couple of packages that I installed outside from repositories (they are SongBird and PersonalBrain), and I want to upgrade one (SongBird) and delete the other (PersonalBrain) but since I am in no way an expert when it comes to use the Terminal, I don't know how to uninstall them both (and then reinstall an upgraded version of SongBird).
I keep getting this message while I try to run updates. The Update Manager says I have 35MB to install but it doesn't do it. Can anyone tell me what the problem is and how to maybe fix it? Also, how do I 'report this bug against the update-manager package'?
View 3 Replies View RelatedIhave Ubuntu 9.10. would like to upgrade soon to the new version of Ubuntu via the package manager. If i upgrade this way will my programs and files and pictures stay as is. I have all my stuff backed up anyways, but would like to know how this upgrade works.
View 5 Replies View RelatedUsing Lubuntu 10.10. I uninstalled Apache Server (it was once installed). But the update manager is cites many new Apache updates that I need. But again Apache is not installed anymore. Synaptic says it's not installed. I have a checker for orphaned packages it says nothing about Apache. Why does the updater say this? Maybe there's a "residue" of Apache somewhere?
View 1 Replies View RelatedI want to upgrade from 9.10 to 10.04, and Update Manager is telling me that it will take several hours to download 1.5GB of updated packages on my relatively slow connection. Because of the use of the machine, I don't really want to leave it downloading and updating for several hours.
Is there a way that I can download the required packages to a cache, maybe over several sessions, and then separately kick off the installation process once everything is available?
Synaptic has a tickbox to "Download package files only" which does a similar thing to my request for normal package upgrades, but I don't see a tickbox like that in Update Manager when doing a major version upgrade.
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View RelatedI am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I just finished installing a dual boot XP/Ubuntu 10.04 LTS for desktop about half an hour ago, and it's my first experience with a Linux OS. Now that my *complete idiot noob* flag is flying, I have an error I think I need to report:An error occurs with the Package Manager, I get this message when I try to run it, and when Ubuntu boots:
E: Encountered a Package with no Package: header
E: Problem with MergeList /var/lib/apt/lists/
us.archive.ubuntu.com_ubuntu_dists_lucid_restricte d_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
This usually means that your installed packages have unmet dependencies I tried to download and install Chrome, and it came up with a similar error.
Is my install corrupt/incomplete or something? My setup is a P4 2.4Ghz, 512Mb RAM, onboard graphics, wireless internet and the HDD is 40GB, split into 2 partitions, and my Ubuntu Partition is 10 GB. I'm running Ubuntu 10.04 LTS distribution, and the other OS is Windows XP Professional SP3.I installed Ubuntu by using the Wubi installer.
I've been trying to install the latest updates on my Ubuntu 10.10 system but keep getting the same error in Update Manager and the terminal:
Code:
dpkg: file triggers record mentions illegal package name I've tried running sudo dpkg --configure -a and sudo apt-get upgrade -f after running sudo apt-get update but to no avail.
After searching the forum and google I haven't been able to find this issue or a solution to a similar issue that works for my problem.
I want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View RelatedIs there a way to undelete a just-deleted file in JFS? I can't seem to find any information on it. I'd have sworn I did this before but didn't save the steps.
View 1 Replies View Related