Ubuntu Installation :: Pixelated Plymouth After Upgrade/fresh Install?
Apr 25, 2010
I upgraded from Karmic to Lucid via Terminal, and everything is working nicely. However, after switching the desktop on, the OS loads OK up to GRUB loading, when new Plymouth is supposed to kick in. But all I get is a pixelated image. The five dots still flash correctly signalling the OS is loading. Apart from that, I did not notice anything else wrong.
Just to check whether it was the upgrade process to have gone wrong, I did a fresh install of Kubuntu RC, this time. As soon as I inserted the live CD, however, I could tell the end result would be the same, for the same pixelation appeared while the CD was loading. And in fact, after installation, I got the same problem (see uploaded photo). So, I'm guessing, maybe it depends on my graphic card? I'm on a Matrox G450, which has always worked fine (for example, on Kubuntu it uses kwin without a hiccup). I'm currently on Kubuntu, but the issue occurs both on it and Ubuntu, where Compiz is deactivated (don't even know if that matters), and I'm only on Metacity. If Plymouth can't be correctly displayed by my card, shouldn't it have a sort of fall-back mechanism allowing users like me to have a close-to-normal experience?
I just activated backports and partners and I got it.
-------------------
I just bought a newish asus x83vm-x2 and am dual-booting seven and lucid lynx. On my last two computers I had migrated completely to Ubuntu, but windows 7 has a few compelling features...Anyways- I'm having issues upgrading the kernel on my fresh install of ubuntu (not that it matters, but I installed via jump drive).In update manager, the kernel upgrades are grayed out.
In synaptic, I get these (current kernel version is 2.6.32.21.22 btw)-
Code: linux-generic: Depends: linux-image-generic (=2.6.32.24.25) but 2.6.32.21.22 is to be installed linux-image-generic:[code]....
It appears as thought "linux-image-2.6.32-24-generic" is not in the repository... but if that were the case, you'd think that my machine would just auto-update to an earlier version. IDK- I'm confuddled.
Still in 8.04 hardy heron, ordinary upgrade via automatic upgrade does not work, some essential pieces missing, but also my bios does not support usb cd and my "original" cd drive is broken. So........ I have burnt a cd Ubuntu 10.04 Lucid Lynx desktop version 32 bit (intel).
1) I have broken cd drive and old bios, i have usb cd drive instead which is not supported by bios when boot from cd.
2) I have still Ubuntu 8.04 Hardy Heron but if i upgrade to 10.04 from there via automatic upgrade, this does not work, some patches missing, whatever, but upgrade this way does not work and in the end the system is set back to 8.04 again...
3) I have burnt a cd with entire Ubuntu 10.04 Lucid Lynx which i had downloaded from the web at ubuntu com; within my 8.04 i want to install all of it, so i want to install 10.04 this way, so a fresh installation via my usb cd (this is also the way i had burnt this cd image; the cd shows all the files so it is the right way burnt), so just not via bios boot, or how to explain this best.
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
Every where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
Upgrade to lucid (by running update-manager -d) succeeded with no major error. But when I reboot the computer, the boot splash screen is "Ubuntu Studio" and the login screen's background is a "Ubuntu-eee" png picture. A funny mess.I was able to get to the new boot splash screen by remove --purge ubuntu-studio, which I must have installed sometimes in the past, but I don't see anyway of getting the new theme for the login screen.I have this eeepc for about 2 years and never have to fresh-install Ubuntu except the first time. I much rather not have to fresh-install just to solve some aesthetic problems.I am pretty sure it's due to some package I installed in the past, but I don't see any Ubuntu-eee related package in Synaptic either.
last week I encountered the following problem: The update manager suggests a distribution upgrade (strange enough since I already have 10.4 and 10.10 is not released yet). The even worse part is that 24 packages shall be removed from my system, including acpi, cryptsetup, network-manager, nvidia-current, plymouth-x11, samba and wine. About 5 weeks ago I experimented (without success) with disabling plymouth because I wanted textmode during booting. I found some warnings that one should not completly remove plymouth because lots of dependencies including cryptsetup (which is vital to my system). So I did not remove plymouth (a look in Synaptic confirms this), but I may have changed some settings concerning plymouth.I am not sure what this upgrade is about.
I upgraded my Ubuntu server install to 11.04 and could not connect to anything outside of it. Its a weird issue because if I run a ping against it as its booting up for about 20 seconds or so I get responses, then it says unreachable. (This is a wired connection by the way). If i login fast enough on the server itself I can ping google for instance and get a response, then it just stops and says host unreachable from that point on.
I then decided to setup a fresh install on the system (virtual server) and I get the same issue. All throughout the install it connected fine, just up until it fully restarts. Its like some service starts that just kills the connection. I rolled back to 10.10 on my other instance and it can connect fine.. Ive been trying everything I can find on the forums but I am pretty stumped by this,
After logging into a fresh Debian 5.0 (lenny) install from a VPS (virtual private server) provider, I run 'apt-get update' and then 'apt-get upgrade' in attempt to get all the security updates, assuming that's what said commands do. Along the way exim (exim4) and possibly other programs (not confirmed) gets installed and is setup to run on bootup...despite it not being installed previously. Why is this? I would expect that either 1) previously uninstalled pkgs are not installed with the 'upgrade," or 2) if 'upgrade' essentially performing a "install everything that's not already installed" maneuver, I wonder why it's not installing a LOT more packages (then just the view I see installed on my system during the 'upgrade.')
Separately: can someone confirm an 'apt-get update' followed by apt-get upgrade' on a fresh Debian 5.0 install system will basically upgrade to 5.0.8 ("current rev level" for lenny)?
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
Pretty soon, I hope, I'll get my brand new PC and wish to install a Linux disto. on it. openSuse may be it But I read recently that people prefer to do a fresh install of a newer version of openSuse, instead of upgrading it, apparently because of problems that may occur by the upgrade. As I understand, this preference apply to all Linux distributions and not only openSuse. Thus I wonder if there's a Linux distro. that's best in handling upgrades?I don't want to make a fresh new install each and every time that my disro. has a new version. I'm afraid to lose the data in that installation, and backing-up the data would be a headache. Also I plan to install a Windows OS alongside the Linux one via the Dual Boot configuration.
I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.
I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better
I have a >5 year old laptop, running Maverick (Ubuntu 10.10) but I need to do a clean install since the video driver is all screwed. The laptop is without USB boot option in BIOS. The CD drive is physically removed.
The HD partitions are /dev/sda1 (ext4) 15gb mounted as / /dev/sda2 (extended) /dev/sda5 (linux-swap) 2gb /deb/sda6 (ext4) 20gb mounted as /home
I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
I want to use my old home partition as home whereas currently there is a 35gb partition that was my old home and a new 'home' within /. how to make my old home recognised by my new install of Lucid.
I trying to dual boot Ubuntu/Windows 7 on my computer. Here is my problem:
Info: I used Wubi and ubuntu-11.04-desktop-amd64.iso. Main OS: Windows 7 Pro 64bit Videocard: Nvidia GT 240
Problems (underlined) as they occured:
1) Installed Ubuntu within Windows, rebooted, saw Ubuntu loading screen (with dots) and then I get graphics corruption (it's really bad I can't recognize anything in the screen).
Then I booted in recovery/failsafe graphic mode and I let the installation finish, then automatically rebooted.
2) Let it boot without pressing anything and instead of graphic corruption it boots in terminal.
Tried startx command but it says something relative to "x not found". Then I found out I had to install proprietary Nvidia drivers so I:
3) Booted again in failsafe graphic mode (in recovery mode) and tried to install it but... no internet connection.
I tried "sudo ifconfig eth0 up" and I got: eth0: ERROR while getting interface flags: No such device
NOTE: If I let it boot itself (terminal) I HAVE internet connection (found out with wget and ping commands).
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.
But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
I'm going crazy with the problem I posted on yesterday about Wordpress not working properly on my Ubuntu systems on the LAN. http://ubuntuforums.org/showthread.php?t=1501043
After comparing results from phpinfo() with those from my public server, making a few adjustments and still seeing the same results, the biggest thing still to be tested is the Suhosin version of PHP. My public server doesn't have the Suhosin version installed. I can't figure out how to change the PHP to one without Suhosin, but I've seen some mentions of it not being installed by default on a fresh version of 10.04.
Is this true, and if so how can I build a LAMP server without Suhosin?
I installed Ubuntu 10.04 from a Live CD today. Everything seemed to go fine, I chose to wipe the entire disk. However, it would only startup once. Now, when I turn on my laptop, all I get is a blank screen.
I had a look at my partitions with GParted on the Live CD and noticed that there was a 1 MiB unallocated space just before it. code...
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version: I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
I did a fresh install of Ubuntu 10.10 i386 on Asus EeePC S101 (1GB RAM, 32GB SSD). On the first boot of the freshly installed system I get 2 error popups several seconds after the screen goes into black graphical mode:popup 1:
Code: Could not update ICEauthority file /var/lib/gdm/.ICEauthority After I close that popup, I immediately get another:
I am new to Ubuntu for the most part, but have done a lot of research on this OS. I just freshly installed version 10.10 32 bit, and the first thing I did was follow this tutorial on installing the drivers for my HIS Radeon HD 6850. I really want to get this drivers working so I can use the 3D effects on this OS.
When I type fglrxinfo I receive:
X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 136 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 When I type aticonfig I get:
aticonfig: No supported adapters detected. The proprietary driver was never installed so I know that driver is not interfering. Originally the aticonfig was not found at all but with a little troubleshooting from the link above It seems to work, but obviously not recognize the card. The card works great on my windows 7 setup. If I can't get this working I may just remove Ubuntu all together, but any help would be amazing!
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
I've decided to do a full total fresh install of natty since I've had so many issues with 10.10, how to backup all my terminal commands and my ppa source list as .txt files? Also can I do a fresh install via ethernet cable or should I use the live cd to overwrite my current maverick Ubuntu?
I recently bought an F12 DVD (from a UK supplier) which I took to be a "full distribution". But looking back on the web site it was not described as such. After booting I selected the Replace Existing Linux System option and it listed the installation of 204 packages - much smaller than the 933 packages when I installed F9. The kernel is now FEDORA (2.6.31.5-127.fc12.i686.PAE)
My problem is that I am now faced with a very intimidating terminal. I am sure the installation did not offer a graphical interface. I have tried to get Gnome running by following the Installation Guide :- 1) 7.4.2 Booting into a Graphical Environment I type in -gedit /etc/inittab and I get back --bash: gedit: command not found
2) 15.3 Switching to a Graphical Login I type -yum group install "GNOME Desktop Environment" Response -Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
3) Again under 15.3 - bullet point 3) Type -/etc/inittab Response --bash: /etc/inittab: permission denied
I have now run out of ideas. I'm sure it is not supposed to be difficult but I don't understand the implications of the command line responses. I really don't want to be condemned to a win dependency.
