Ubuntu Installation :: Upgrade Wants To Remove Lots Of Packages (possibly Depending On Plymouth)?
Oct 5, 2010
last week I encountered the following problem: The update manager suggests a distribution upgrade (strange enough since I already have 10.4 and 10.10 is not released yet). The even worse part is that 24 packages shall be removed from my system, including acpi, cryptsetup, network-manager, nvidia-current, plymouth-x11, samba and wine. About 5 weeks ago I experimented (without success) with disabling plymouth because I wanted textmode during booting. I found some warnings that one should not completly remove plymouth because lots of dependencies including cryptsetup (which is vital to my system). So I did not remove plymouth (a look in Synaptic confirms this), but I may have changed some settings concerning plymouth.I am not sure what this upgrade is about.
View 3 Replies
ADVERTISEMENT
May 13, 2010
Using Xubuntu,I have upgraded from Karmic to Lucid. Post upgrading when attempting to install a new package with aptitude, it is reported that cups is "BROKEN" and a host of packages are marked for removal.
View 1 Replies
View Related
Jun 7, 2010
I had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although
Code:
joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)
View 10 Replies
View Related
Jun 1, 2010
I did a clean install of fedora 13 on my sys, however when i run
Code:
rpm -qa |grep fc12
lots of and lots of fc12 packages pop up. below is the list. if there is fc13 version of these packages, and if there is (which I suspect for at least some of them there should be) why my sys doesn't update to those packages?
here is the list of fc12 packages:
Code:
~$ rpm -qa |grep fc12
ctan-cm-lgc-fonts-common-0.5-17.fc12.noarch
plexus-compiler-1.5.2-4.3.fc12.noarch
texlive-texmf-errata-fonts-2007-7.fc12.noarch
[code]....
View 5 Replies
View Related
Jun 2, 2010
I managed to successfully upgrade FC11 to FC13. While doing the post upgrade steps, I made a HUGE mistake. After identifying the unsupported packages, I used "yum remove package1 package2" command to remove the obsoleted ones without realizing the yum was also removing many FC13 packages! Here are the cmd sequence used:
# package-cleanup --orphans
...
# yum remove compat-db45-4.5.20-5.fc10.i386 flash-plugin-10.0.32.18-release.i386 gnome-spell-1.0.8-5.fc9.i386 ifd-egate-0.05-21.i586
[code]....
I simply typed Yes and left unattended for a few minutes after yum prompted there were # of packages to be removed as I blindly believed it would do the job. After returning to the computer, I found many installed icons were disappearing, the wireless suddenly turned off etc. I killed the yum process right away but it was too late.
-Is there anything I could do to undo the yum remove process?
-How to safely remove supported packages?
View 14 Replies
View Related
May 5, 2010
Upgrade to lucid (by running update-manager -d) succeeded with no major error. But when I reboot the computer, the boot splash screen is "Ubuntu Studio" and the login screen's background is a "Ubuntu-eee" png picture. A funny mess.I was able to get to the new boot splash screen by remove --purge ubuntu-studio, which I must have installed sometimes in the past, but I don't see anyway of getting the new theme for the login screen.I have this eeepc for about 2 years and never have to fresh-install Ubuntu except the first time. I much rather not have to fresh-install just to solve some aesthetic problems.I am pretty sure it's due to some package I installed in the past, but I don't see any Ubuntu-eee related package in Synaptic either.
View 3 Replies
View Related
Sep 21, 2010
How to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies
View Related
Apr 25, 2010
I upgraded from Karmic to Lucid via Terminal, and everything is working nicely. However, after switching the desktop on, the OS loads OK up to GRUB loading, when new Plymouth is supposed to kick in. But all I get is a pixelated image. The five dots still flash correctly signalling the OS is loading. Apart from that, I did not notice anything else wrong.
Just to check whether it was the upgrade process to have gone wrong, I did a fresh install of Kubuntu RC, this time. As soon as I inserted the live CD, however, I could tell the end result would be the same, for the same pixelation appeared while the CD was loading. And in fact, after installation, I got the same problem (see uploaded photo). So, I'm guessing, maybe it depends on my graphic card? I'm on a Matrox G450, which has always worked fine (for example, on Kubuntu it uses kwin without a hiccup). I'm currently on Kubuntu, but the issue occurs both on it and Ubuntu, where Compiz is deactivated (don't even know if that matters), and I'm only on Metacity. If Plymouth can't be correctly displayed by my card, shouldn't it have a sort of fall-back mechanism allowing users like me to have a close-to-normal experience?
View 2 Replies
View Related
Feb 16, 2011
Distro: Ubuntu 9.10 (partially upgraded to 10.04)
Terminal log below:
In addition, I was unable to uninstall libreadline5 (since I already have libreadline6 installed).
It appears that libreadline5 may be the source of this problem with dependencies.
View 2 Replies
View Related
Oct 26, 2010
I am currently in the process of moving around 20TB of data from one server to another. Security is not a concern, since the data are freely available to anyone on our network anyway. There are a couple of things that I'm trying to decide on:
(1) protocol choice
Of all the choices I have--nfs, ftp, scp, rsync, samba--has anyone done any benchmarking to show which would be the fastest/most robust transfer protocol? I know nfs has slow write speeds for synchronous transfers. Asynchronous would be faster, but less robust. I'm leaning toward rsync since it performs md5sums to confirm the file transfers. (Remember if there's a 1 in a billion chance that a byte will get corrupted, then I'll have 20,000 corrupt bytes in the transfer.)
(2) Nautilus emblems
We use emblems in Nautilus to categorize files. The old and the new server have the same directory structure.Is there any way to copy the Nautilus emblems from the old server to the new server. What I want is that if a user had marked a particular file with a star on the old server, then that file would be marked with a star on the new server when he/she logs in.
View 1 Replies
View Related
Mar 29, 2010
I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
View 1 Replies
View Related
Aug 3, 2011
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
View 5 Replies
View Related
Jul 20, 2010
I want to remove the Plymouth frame buffer display from my Fedora 12 desktop. I have replaced the plymouth executiable with a simple bash script but the display still appears. I tried rpm remove plymouth but there a dependencies :
Code:
rpm -e plymouth
error: Failed dependencies:
[code]....
View 4 Replies
View Related
Mar 22, 2010
I installed java and my computer went off in the middle of the process and some packages didn't install correctly. I decided to reinstall them but it doesn't let me. I have tried to remove them using the synaptic manager, I also tried to remove them manually. I've tried: apt-get -f install also. I tried to re-install it using:
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
but this error comes up
Errors were encountered while processing:
sun-java6-jdk
sun-java6-fonts
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 7 Replies
View Related
Jan 7, 2011
Whenever I do an apt-get upgrade, I get this warning:Install these packages without verification [y/N]? How to remove this warning? Nothing in the forum has seemed to work so far for me.
View 9 Replies
View Related
Apr 15, 2011
I can't seem to figure out what's going on here. Whenever I use synaptic to attempt to add/remove anything I receive the following error: (Reading database... 65%dpkg: unrecoverable fatal error, aborting: files list file for package 'dnsmasq-base' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install.
View 3 Replies
View Related
Jun 3, 2011
I was installing some packages using the generate download script in synaptic and 'sudo dpkg -i -R ...' because I don't have my own internet connection at home but somewhere else. I think I got carried away a little and installed some packages that have some dependency issues. Now I have three broken packages that need to be removed, but I don't want them to affect (remove) other packages which would be marked whenever I try to mark them for removal, for fear that their removal might affect other functions. I think my machine was just fine before I started to fumble with individual dependencies; that's why I don't what the other dependencies removed. My question is how do I remove those dependencies only using the terminal without removing the others?
View 3 Replies
View Related
Jan 5, 2010
After updating to Karmic, Synaptic shows almost all of my installed packages in the category "Installed (manual)", including about half of the packages that belong to a clean Ubuntu installation (e.g. apparmor, apt and hundreds of others). As a result, I can't easily get a list of those packages that I did indeed install manually and may want to remove. Is there a way of removing the "Installed (manual)" flag from all packages?
If I could do this, all packages that do not belong to the core Ubuntu system should show up as "Installed (auto removable)" and I could individually mark only those as manually installed that I really still need and let apt/synaptic uninstall everything else. I know that with today's hard disks, disk usage of installed packages is not an issue. But those packages accumulate over time and need to be updated with every security update and every ubuntu dist-upgrade, wasting time and bandwidth.
View 2 Replies
View Related
Jun 7, 2010
I added Sid to my /etc/apt/sources.list, so that I could install KDE4 (as described on some random KDE4/Debian web page). However, I now think that was a mistake and it would have been better to attempt to backport KDE4 onto Lenny. Over time, more and more sid packages have crept into the system to resolve dependencies, and now my system seems a bit broken; 'top' won't run, complains about missing libtermcap which is there, my cron jobs seem to be ignored and so on.
So given a system that is a mix of Lenny and Sid, what is the best way to uninstall all the Sid packages and then get back to a clean Lenny install? Is there some way that I can list all Sid packages, maybe to a file, then use that to tell apt what Lenny packages to install after sources.list has been updated to remove Sid?
I kept a log as the system was built, of everything that had to be manually set up after the debian installer has completed when I moved from 32-bit to 64-bit, so I could just do a clean install of Lenny then reconstruct the system from scratch. However, would much prefer to use the package management tools to revert to a clean Lenny.
View 14 Replies
View Related
Mar 31, 2011
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies
View Related
Mar 11, 2009
I've installed Fedora 10 Gnome from DVD. How do I let yum and "Add/Remove Software" first check the DVD before downloading packages from the Internet?
View 1 Replies
View Related
May 16, 2010
Am trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies
View Related
Aug 13, 2010
I just started having a problem with my ubuntu Jaunty.When I try installing Gimp and VLC through Synaptic I get the following error Could not mark all packages for installation or upgrade The following packages have unresolvable dependancies. Make sure that all repositories are added and enabled in the preferences
gimp:
Depends: libgimp2.0 (>=2.6.10) but 2.6.6-0ubuntu1.1 is to be installed
Depends: libatk1.0-0 (>=1.29.3) but 1.26.0-0ubuntu2 is to be installed
Depends: libc6 (>=2.11) but 2.9-4ubuntu6.2 is to be installed
I get similar message for VLC as well
I installed Amarok after this problem started and it installed properly.
View 9 Replies
View Related
Oct 11, 2010
I've just upgraded 10.4 to 10.10 and everything works fine and looks good but I now have the usual palaver of needing to remove some default packages that have been installed but which I don't want such as Empathy and Evolution. Is there any way to upgrade to a new release without getting all the default software packages?
View 1 Replies
View Related
Jun 3, 2010
i was trying to install ubuntu 8.04.4 LTS on my dell latitude c800 and the install is hanging at "checking for packages to remove..." and i was wondering what steps followed this, and if any of the steps that follow this one are critical to the laptop functioning... so, is it safe to restart my laptop when the install is only at 96% ?
View 1 Replies
View Related
May 4, 2010
I'm trying to upgrade my 9.10 desktop to 10.04, and it is failing to fetch the following two packages:
[URL]
I've made sure everything is patched current prior to the upgrade and have tried clearing out the contents of /var/cache/apt/archives/partial first as well to no avail.
View 3 Replies
View Related
May 25, 2010
Since I had problems with Openoffice since the upgrade to 9.10, I've tried to uninstall all openoffice. I've searched for 'openoffice' in synaptic and uninstalled all thet I've found. It has uninstalled many other things, thunderbird, firefox and god only knows what other. Now, there is a way to know what are the packages installed by default? Or, to install all the dafault packages? Or, there is a log of what I've uninstalled?
View 1 Replies
View Related
Oct 12, 2010
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies
View Related
Nov 13, 2010
After upgrading from one version of Ubuntu to another, what happens to packages that have been installed prior to the upgrade that have higher version numbers (are newer) than the ones that are supposed to be installed via the Ubuntu upgrade?Specifically, I'm referring to compiling the latest version of FreeType to try to alleviate some dependency issues related to compiling Wine (I need a custom Wine patch), and I was wondering what would happen if I had a newer version of FreeType installed if I then later upgraded from Lucid to Maverick, and if Maverick used an older version of FreeType by default than the one already installed on my system.
View 5 Replies
View Related
Feb 27, 2011
I have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies
View Related
