I m new user for Ubuntu..I m using ubuntu for last 5 Months.I love very much and also i m spreading ubuntu community in my place.I have a problem now to use Ubuntu.When i on the ubuntu...Its says in grub kernel is not load...
View 1 Replies
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
I have windows xp and now I have installed UBUNTU 9.10. When my laptop starts it comes up with the option of Windows Xp and Ubuntu. Selecting windows xp works fine here but Selecting UBUNTU comes up with another screen giving three options.
1. UBUNTU
2. UBUNTU recovery and
3. Windows Xp
Selecting any of the above doesnt work here. With option 1 & 2 it gives the error message
error: you need to load the kernel first
I am totally new to this UBUNTU.
I've finally gotten around to installing Ubuntu 10.10. I currently have it installed on on a 320GB HDD. It's the 64bit. I also have Windows 7 x64 on a 1TB HDD. After I installed it, I keeping getting "Error: You Need To Load the Kernel First." Windows 7 boots up fine, but Ubuntu doesn't. I'm almost completely new to Ubuntu so I don't know how I would go about fixing this.
View 9 Replies View Relatedim dual booting ubuntu and win7 (i installed ubuntu using wubi)yesterday i ran the update manager and i noticed it installed a kernel update.since then, whenever i reboot i get the boot loader menu asking me to choose between win7 and ubuntu, but when i choose ubuntu, instead of the regular menu that asked me which kernel version i wanna use i get a command-prompt-like interface with the title:
View 1 Replies View RelatedI successfully installed Ubuntu 9.10 Netbook Remix on an Asus EeePC in a dual boot mode with Windows XP. Because the computer has no CD drive, I used a USB stick to download the files for installation. Twice now, after upgrading to a new kernel (2.6.31-17 and 2.6.31-19 I think), when rebooting after the upgrade and selecting Ubuntu from the operating system menu, I get a message:
sh:grub>
along with a notice about limited shell commands being available. The ls command results in:
(loop0) (hd0,3) (hd0,2) (hd0,1)
In trying some of the other commands, I get a message that a linux kernel isn't loaded. The computer still runs Windows fine - or at least as fine as Windows ever runs. I'd like to recover Ubuntu without doing another full installation.
I've been using Ubuntu since 7.10 Gutsy Gibbon. I only recently fully switched to Linux OS's, and Ubuntu is now my primary. I currently have 9.10 installed. CURRENTLY I also have Backtrack 4, and Fedora 12 (Ugh!).Previously, I thought something was wrong with my my filesystem in Ubuntu 9.10, and after an upgrade of the linux kernel, I started to get Error: You need to load the Kernel First. That's where my problems started. I had upgraded to 9.10 from 9.04 and I still had Grub Legacy, so I went through hoops to try and get it to work, but eventually everything just kind of broke, and I completely wiped off my partitions on it and started fresh installs of all 3.
And now that the new linux kernel is released, 2.6.31-20 generic (I think... That's what the highest number on a file I can find in /boot is)I went through a few more hoops and ladders and tried to get it to work, but to no avail. I've looked the internet for a solution to this and tried just about everything but there is no unified answer, and I've seen on Launchpad there are alot of bugs that are classified as 'Fixed', but the problem still remains.I took out the 'quiet splash' part in the GRUB2 line for the newest kernel and it didn't do anything. It only changed it to "Error: Couldn't find file".This is the top two kernels (Main and Recovery for the new, and Main and Recovery for the previous working one)
Quote:
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
[code].....
So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies View RelatedAfter installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
View 9 Replies View RelatedAfter to trying make a Multiboot live USB using MultibootSystem, my Ubuntu (10.10 install in Windows 7) is not booting anymore. I have moved the folder c: ubuntu (to saved my data) uninstall Ubuntu and reinstall it still nothing. I have the grub but when I select Ubuntu I have the following error message:
error : out of disk
error : you need to load the kernel first
Press any key to continue...
When I press anykey () I no have the message
error : unknown filesystem
error : you need to load the kernel first
Press any key to continue...
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
View 8 Replies View RelatedI am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
I upgraded my ubuntu version 8 to 10.. I was using my new version normally, but on the GRUB screen, I have two choices (ubuntu 1 and 2.. something like 'generic-2.6-32..) I could only choose the second option.. because the first option, return this error: you need to load the kernel first.
Ok, i'm using the second option... but when i'm tried to install the driver of my nvidia 3d board, the second option of boot is also not working.. =(return this erros: kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (8,33)... both are kernel problems.. my instalation of ubuntu 10.04 was perfectly successfully (aparently)..
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I can choose which kernel I want to boot by default, instead of having to hold the shift key down every time I want to choose the kernel I want to boot into. I am running multiple kernels.
View 1 Replies View RelatedMy machine starts and the grub rescue> flashes .... i tried to manually load into my ubunutu 10.4 kernel-2.6.32-24my commands were
grub rescue>
set prefix=(hdx,y)/boot/grub
insmod linux
[code]....
i have just finish compiling a new kernel from source and would like to know how to load it in to grub2 i know grub the older version was easy to setup with the new kernels but i am not really in to grub2 to know how to load a new kernel to it.
View 1 Replies View RelatedI am running Maverick and I want to install kernel version 2.6.35-25. I marked all the available options in Synaptic, but the new kernel won't load in burg. What else am I supposed to install?
View 3 Replies View RelatedWell after a power failure yesterday this is what I get:
Grub loads with 4 options ....
Choose to load Ubuntu I get ...
Error: cant load file Error: you need to load kernel first
I'm a N00b, got ubuntu 11.04 loaded on a 250 gig worked great till power failure
On Grub legacy i used a menu entry to boot from a DVD since the bios on my pc doesn't recognize my DVD burner.... So before on the old grub i can just added this menu entry and it all worked...title DVDroot(hd0,0)kernel /boot/grub/memdisk.bininitrdboot/grub/sbootmgr.dskthen grub 2 came along and that all changed..on the 40_custom file i added this
menuentry "Boot DVD Drive" {
set root=(hd0,0)
linux /boot/grub/memdisk.bin
[code]....
I went to fire up Lucid this after noon and it gave me this error message. I didn't want to write all of that down so I took a picture. After several minutes it did nothing. I then decided to do a hard restart. This time it isn't giving a signal to the monitor. The monitor is less than half a year old, but I tried another. Still nothing. It show's no signal like it's not even hooked up to a machine. It doesn't even show the BIOS menu! I don't know if this is the cause or not but, I left my computer at my mothers house last night were they had a thunderstorm.
I have several applications like Virtual box and Mobloquer that took a hell of a long time to setup. Plus three guest operating systems, and some work that I didn't backup like videos. If we can get this up and running without re-installing.
Title describes the problem rather well. After selecting Linux 2.6.23-22-generic 64-bit in the GRUB bootloader, I am staring at a black screen with a white flashing underscore for almost 2 minutes (usually between 1min40sec and 2min). The Linux kernel is loading here, and it's taking forever!
Once Plymouth starts it barely even manages to flash into view before it's done and I get to login, so bravo @ Canonical.
But seriously, I need that boot time cut down A LOT.
Since I'm assuming it has quite some relevance, here's all my installed programs: (So if you know any offenders you can point them out)
EDIT: I can see it also lists packages I've removed after installing them. Removed packages are listed as "deinstall" and are, obviously, NOT installed or functioning, but their config files remain I assume.
Code:
acpi-supportinstall
acpidinstall
adduserinstall
adium-theme-ubuntuinstall
aisleriotinstall
[Code].....
I've installed LTSP on 10.04. I can get a couple of (fairly new) laptops to boot from this so all appears to be fine.
But my key goal is to get ASUS K8S-MX motherboard with sis 190 lan to boot so that I can set up a computer lab.
All seems to go well on boot but
When loading essential drivers, nothing seems to load and I get a done.
Then running /scripts/init-premount I get no interfaces found.
Then mounting root file system It starts Running /scripts/nfs-top and drops into kernel panic.
xubuntu 9.10 I have a Drobo, sort of RAID storage device. It makes use of volumes of 2TB. Only the first volume (LUN) is shown up. According this information;[URL]... that happens if the scsi_mod kernel module is not loaded.
View 1 Replies View RelatedMy nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[Code].....
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.
I have installed Ubuntu 10.10 on a USB 2.0 flash drive (8GB),like this: [url]
The installation was successfull, but when i want to boot ubuntu, it shows the grub, and after it, an error message: "You need to load the kernel first. Press any key to continue"
I've got a Macbook Pro 13'' (2010 edition) with a Intel processor.
My grub.cfg file is here:
Code:
