I'm on 9.04 and decided to upgrade to 10.04 LTS, by upgrading 9.04->9.10 and 9.10->10.04. However, I'm stuck in the first step because my installation doesn't see anything to upgrade to:
[Code]...
I do have a USB stick with which I can do a clean install of 10.04 LTS, but for fun and education I want to do it the messy way first. So what could be causing this? Should I post my /etc/apt/sources.list?
I have a netbook with no CD Drive and no spare memory stick. I am trying to updat from 7.04 to 10.10 or whatever is latest. Update manager wont show the update button though to upgrade to the next version of Ubuntu.
It said something about statsux repository or something had no key so I remove it. Had to remove medibuntu too and eepc repository along with opera. Then update manager worked with no errors but still gave no updates for software or a upgrade to next distro button.
i want to upgrade from 9.04 jaunty to 11.04. i already have my 11.04 on my usb and will be booting from it, now, i dont know what to do to install it over my 9.04 having it dual booted to window 7.
View 9 Replies View Relatedi used the Update Manager to upgrade from 9.04 to 9.10.. then it said:
NO VALID MIRROR FOUND
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'jaunty' to 'karmic' entries. If you select 'No' the upgrade will cancel.
I choose yes, then is said that there's something wrong with the network I'm connected to..then it closes..the upgrade failed.
I've just upgraded to the newest distro (and was amazed how smooth it went) via the update manager, but it seems that I've lost firefox (and my bookmarks :/ ) in the process. Is there any chance that I get my bookmarks back?
View 9 Replies View RelatedI'm trying to keep my desktop without a net connection as up to date as possible. It currently has jaunty installed, but I'd like to upgrade to lucid via dvd, is it possible without going through karmic as an intermediate? I prefer not to waste my DVDs, I'm even passing my lucid disk around to friends after the install.
View 1 Replies View RelatedI seem to have made a hash of moving a machine from jaunty to maverick. It used the kde3 remix, and pearson's site seems to be bouncing up and down, mostly down, for that at the moment. I've ended up with a machine that is console only. I've tried installing ubuntu-standard, which put a bunch of things on, but still no GUI.
staying with KDE3 would be nice, but I don't have time to mess with it. I find KDE4 painful, and have been put off by the ideological "purity" that caused the gnome split since its inception. I guess that leaves me with Unity. But how do I get the bloody thing up. Heck, xdm & fvwm sounds pretty good right now, too.
I'm a newbie to ubuntu and I only used ubuntu less than a month, and I really like it. I would like very much to upgrade my ubuntu jaunty to ubuntu karmic but I have several concerns. If I choose to upgrade via update manager: 1. Will I lose my compilers and configurations? For example, some of my programs in current ubuntu are using gcc 4.3 and g++-4.3. I know that Karmic uses higher version of gcc and g++ and I have installed these programs in higher version of gcc and g++ and I got some problems. I would very much like to stay with my current compilers and configurations. I mean, do have to install all these previous version of compilers when I upgrade to Karmic? 2. What about my data in my home folder? Will it be erased? 3. What about my data in programs such as firefox? Will it too be erased? 4. What will happen to all third party software if I upgraded to Karmic?
View 9 Replies View RelatedI had an old machine running Feisty.I followed the EOL guides and upgraded from 7.04 => 7.10 => 8.04 => 8.10 (intrepid).Now that I'm at intrepid, I want to use the update manager to upgrade to 9.04 (Jaunty). Whenever I launch update manager (System->Administration->Update Manager) everything looks fine until I choose "New distribution release '9.04' is available" and click the Upgrade button.
At this point, Update Manager complains and says "Could not find the release notes" "The server may be overloaded". I'm assuming this could be a faulty URL somewhere, but I wouldn't know where. My sources.list seems to work fine for regular intrepid updates, so not sure there would be anything there that could be the fault. Once I get this error, I can only click "close".
Extracting the upgrade failed. There may be a problem with the network or with the server. Obviously, my general networking is fine (or I wouldn't be able to post this message)..and again, standard updates work fine.Any insight into what is causing this (or maybe how Update Manager works so that I might try a bit of debugging myself?
I am trying to upgrade from Jaunty Jackelope to ubuntu 9.10 and this is the terminal message that I get....
Setting up debhelper (7.0.17ubuntu4) ....
Setting up java-package (0.42ubuntu1) ...
Setting up cacao (0.99.4-1) ...
Setting up sun-java5-doc (1.5.0-19-0ubuntu0.9.04) ... This package is an installer package, it does not actually contain the J25DK documentation. You will need t ogo download one of the archives: jdk-1_5_0-doc.zip jkd-1_5_0-doc-ja.zip (choose the non-update version if this is the first installation). visi Java SE Downloads - Previous Release - JDK 5 now and download. The file should be owned by root.root and be copied to /tmp First off I don't know which file to download from the website, and then once I do download, how to use zip files with ubunu? Is this something I can do in a few simple steps with the sudo apt-get and get the file that way?
Been using since summer 2009 the xserver no backfill from PPA: [URL] and it was working fine with my ATI video card. No heavy CPU usage when restoring from minimized and a general performance boost were the results of that use.But recently made an upgrade and realized that xserver-xorg-core package (check it from synaptic manager) has been upgraded to a jaunty-proposed version and the problems started to appear again!So using Synaptic I selected this package and hit CTRL-E key in order to choose the nobackfill version. This way things got back to normal!
View 2 Replies View RelatedI upgraded fro Jaunty to Karmic and then to Lucid and my TV card has stopped working. I had been informed that this was a result of the splitting of the linux-firmware into two separate packages, but having installed the linux-firmware-nonfree package the problem persists. The card is a Hauppauge WinTV PCI and although it is properly recognised by commands like lsmod, lspci and in the sound card settings, I can't tune in a single channel. It worked out of the box in Jaunty. Is there anything else that needs to be done to get the nonfree firmware working properly?
View 3 Replies View Relatedi havent really had a chance to ask this for a while, but im in a bit of a bind. im trying to do a release upgrade of 9.04 through to 10.10. I'm stuck at getting karmic to reboot because of a grub problem. I keep getting "error 15" file not found. Not one single forum post has helped for some reason which is strange. Release upgrades have always worked even though not recommended, but this one of all has been the worst of the lot and totally insane.
Im testing in a vmware before i do this for real on the production server, I am using a raid1 setup and boot partitions set to md0.
my fstab after the upgrade before i reboot looked like this
# / was on /dev/md1 during installation
UUID=######################## / reiserfs relatime 0 1
# /boot was on /dev/md0 during installation
[Code]....
I tried to first install grub2, i confirmed it installed and worked perfect, and therefore removed grub legacy.
Ran do-release-upgrade , it completely uninstalled grub2, and it also fails at building /initrd.img-2.6.31-22-server and adding into the grub menu therefore the upgrade fails with this error. I reinstalled grub2, the menu came up fine but trying to load a kernel gave me something like
alert ! /dev/disk/by-uid/############## does not exist.
What is the go with this ? Ive been trying to make this work off and on for 6 months
I just upgraded from jaunty to intrepid. The upgrade tool went through everything without a hitch and when it finished it told me to restart my computer. When I did, ubuntu began to boot, got past the initial loading splash screen, but immediately after, before the login splash, the screen freezes with some strange graphics glitch and refuses to work from there. How can I fix this to any workable state, upgraded or not?
View 1 Replies View RelatedOn a fully updated Ubuntu 9.04 system, I had successfully configured wvdial to connect using a USB modem ("Update" brand) with an ID of 067b:0611 (uses the pl2303 driver module). In considering an upgrade to Ubuntu 9.10, I tried a LiveCD and was unable to connect using wvdial. However, because I had made the CD a couple months before, I went ahead with the upgrade (via the internet; not a fresh install) in the hopes that it would end up working or I would be able to find a solution for it.
The Problem: The upgrade was a success as far as I could tell, but when I tried to connect to the internet with wvdial, I was not able to. I checked the wvdial.conf settings to make sure they were the same as before, added some new ones I thought it might need, unplugged the modem and replugged it, restarted my system, etc., but all to no avail. Whenever I would try to run wvdial to connect, I would get the following output:
Code:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
[code]....
This was different than the output I used to get with wvdial, but when I went over to my browser (Firefox) the internet worked fine. I'm assuming my email client and other things will work okay as well, but have not tested them as of yet.
A final touch I did to make connecting a bit less 'painful' was to right-click on the panel (at the top of the default Ubuntu screen), and click on 'Add to Panel'. Then I selected 'Custom Application Launcher', chose 'Application in Terminal' for 'Type', gave the launcher a name, pasted in that 'horrifically' long command line above, gave a brief description in the 'comment' box, then pressed 'OK'. Voila! I now have a launcher on my panel that with a single-click will bring up a terminal screen where I enter my sudo password and it connects. Then when I want to disconnect I just go back to that terminal, press Ctrl+C, which promptly disconnects me and causes the terminal to vanish into thin air.
Now, I don't know enough about this stuff to know why this command worked and wvdial didn't, but if you know, feel free to post a reply. Or if you'd like to see what settings I had for wvdial that worked in 9.04 but not in 9.10, let me know. Or if you think it's worth checking to see if this should be posted as a bug in either wvdial or Ubuntu, you can mention that as well.
I am tired of the bugs in 9.10 that make using Ubuntu almost impossible so I thought I would try Jaunty. I cannot find the download however for it.
View 2 Replies View RelatedIt says invalid rom contents. I installed the desktop netinstall one
[url]
Told me to get it. Should I get the alternate one instead? I am not sure what's going on lol.
I have an iBook G3 Laptop
But I think the problem is not with that.I suspect the DNS server .. All has been running fine .. then suddenly a warning triangle appears and when I click on it it starts update manager .. then I do a "Check"and it says something like "25 packages need downloading .."Then I get this error (25 times !)W: Failed to fetch http://archive.ubuntu.com/ubuntu/dis...ic/Release.gpg Could not connect to 192.168.1.1:8080 (192.168.1.1). - connect (111: Connection refused)
View 1 Replies View RelatedUbuntu Jaunty i386 server used 8% of the available 2GB RAM. After upgrading to Karmic, usage is now at 30%.Seems many more mysqld instances running
View 8 Replies View RelatedI have a dedicated server running Ubuntu-server Jaunty. As you know, this OS no longer has security updates. I'm trying to upgrade it to the latest LTS (Lucid) but first thing's first: I'm having trouble upgrading from Jaunty to Karmic.
Here's the problem. I get the following when I try do-release-upgrade:
Code:
$ sudo do-release-upgrade -d
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
[Code]....
force an upgrade to Karmic instead of Lucid? (And no, sadly, re-installing is not an option as this is a server with no direct physical access)
I have Jaunty 9.04 and I was sitting online yesterday and the update manager came up. I let it do its thing as usual, but it seemed to have an issue with some firefox related package (having to do with branding?) and then the little flipping-out icon showed up in my tray saying that a package broke. It did not, and the firefox launcher turned into a missing puzzle brick and clicking it causes a small window to come up with the following message:
XML Parsing Error: undefined entity
Location: chrome://browser/content/browser.xul
Line Number 31, Column 1:<window id="main-window"
^
So I might have tried to uninstall firefox from synaptic or something, but this just created more errors and I don't think it worked properly anyway. Inside Synaptic, there is one listed as a "broken" package in the broken filter. It is something to do with Firefox Branding AMD64 and all that goodness.
When I use a package manager (aptitude or synaptic) to install updates to firefox (3.6), I get the following error:
[Code]...
I have a working system running Jaunty. For various reasons I want to move to Karmic, but I don't want to use the "upgrade" feature in the software update manager. I need to swap some hard drives around, so I want to do a fresh installation. My question is, what is the easiest way to "migrate" a user to a fresh installation? On a Mac you can simply run the migration tool and it moves everything into place with relative ease, whether from a backup drive or from one computer to another. Is there any analogous program in Ubuntu? Or is it just so simple that such a program is unnecessary?
View 1 Replies View Relatedi was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies View RelatedGrub use to open an old kernel I tried to edit /boot/grub/menu.lst to open the one I wanted. The edit gets saved but it still opens in the wrong kernel. i.e when edit menu.lst it has no effect. I have tried running sudo grub-update. I've read piles of forum entries to no avail. I am running Jaunty.
View 7 Replies View RelatedI decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
