Ubuntu :: I/O Error On External Hard Drive
Jul 9, 2011
A few days back, I was moving a file from my home directory to a 1TB WD external hard drive (NTFS). In the middle of the process, the power went out so moving was interrupted. Now, the file I was trying to move is there on the external hard drive, but it can not be read, moved, renamed or removed. Besides, the destination folder on the external hard drive and all other files in it can be read, but they can't be removed or renamed.
View 5 Replies
ADVERTISEMENT
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Mar 28, 2011
i have a 2TB WD external HDD, works ok in windows, although sometimes tries to run on some random driver.when connected in linux i get the following error, however, my other 500GB WD HDD works flawlessly:Quote:An error occurred while accessing '2TB Backup', the system responded: org.freedesktopUDisks.Error. Failed: Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119):
View 14 Replies
View Related
May 25, 2010
I have Ubuntu/Vista dual boot desktop with Single HDD (200GB) that i cloned to an external USB HDD (320GB) using clonezilla. My intention is to use the external HDD as a backup to up running in case my 3 year old desktop HDD fails. To make sure the clone is good to use if need, i connected external HDD to USB port and tried boot from it but got "Error 18". I tried to Google got some infoDid a fdisk -lu and got the following.
Code:
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
[code]....
View 1 Replies
View Related
Nov 29, 2009
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
View 1 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Jan 11, 2011
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
View 9 Replies
View Related
Feb 28, 2010
The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
View 4 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Dec 16, 2010
i borrowed an external hard drive from my friend to back up a load of stuff on my windows partition before reinstalling it. I am doing this through ubuntu. I am trying to zip up folders like My Documents etc and chuck them on the external hard drive but it always comes up with errors to do with read/write permissions. In the permissions tab on the folder properties of the ext hard drive it says I am owner but i have no file access (only folder access is create and delete files). When i try to give myself read/write permission it just goes straight back to nothing when i look at it again.
View 2 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Jul 10, 2009
I've been running Debian Lenny kernel 2.6.26 w/ desktop kde3.5 on my laptop for a while, and im going to take a trip in which i will be unable to take wmy laptop with me. However, where i am going contains computers and i figured if i could install debian onto my external harddrive, i could just boot onto the other computers. I install it using the debianlenny-i386 dvd image. However whenever I try to boot it from a computer. Grub returns
Code:
Grub Loading...
Error 21
and then the blinkng cursor. On one site i found something saying "you may need to activat the drive" and some command-line instructions on how to do it. However the commands have faded from memory and i am now unable to find that site again. Could anyone offer insight on how to fix this "grub error 21" or how to activate it. I run primarily debian but i have a windows partition on one of my relative's computers.
Thank you in advance for the help!!!
btw I'm installing on a western digital 500gb "passport" external hard drive with ext3 and swap partitions.
View 5 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Jan 3, 2010
So I recently got a WD MyPassport external hdd with 500gb capacity. I formatted it to NTFS so that it would be more efficient transferring data between my Ubuntu and Win7 dual boot. But now I want know if it is possible for me to create a 100gb FAT32 partition on the external without destroying the data on it.
View 7 Replies
View Related
Jan 4, 2010
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
[code]...
View 9 Replies
View Related
Jan 5, 2010
Is it possible to use Ubuntu for a malfunctioned external hard drive?A year ago my external hard drive malfunctioned and I cant get into it, though it plugs in alright and the computer recognizes it, I'm hoping that maybe precious files havent been wiped and are just stuck in there.Is there anyway that Ubuntu can help?Also, if there is, what exactly is the first thing I do or type into the terminal?
View 1 Replies
View Related
Jan 16, 2010
I'm trying to get ubuntu 9.04 to recognize a Maxtor One Touch III USB external hard drive. This drive has been formatted and used on a Windows XP. I cleared everything off but am trying to see if I can arrange it so that I can back up from linux and access (if need be) from a Windows machine.
Here is what I get with fdisk -l:
/dev/sda1 * 1 14219 114214086 83 Linux
/dev/sda2 14220 14593 3004155 5 Extended
/dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
View 6 Replies
View Related
Jan 18, 2010
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies
View Related
Feb 1, 2010
I have a 250GB external hard drive that I want to format to ext4. It will be used to store back ups of my documents, music and pictures. I tried booting the Ubuntu 9.10 Live CD (amd64) and using gparted to delete the partitions that where on the hard drive leaving only unallocated space, then creating one new partition that was ext4. I clicked apply and after a short time it said all operations completed successfully.
Now the problem is it won't let me transfer any documents onto the hard drive, or even create a folder or file. If I go into the properties of the hard drive, under the permissions tab it says I am not the owner...?
View 7 Replies
View Related
Feb 2, 2010
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies
View Related
Feb 23, 2010
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies
View Related
Mar 29, 2010
I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.
View 9 Replies
View Related
May 5, 2010
I have an external hard drive on which many of the folders are showing up as plain text files.
View 2 Replies
View Related
May 7, 2010
can just buy any External Hard Drive and it will work on ubuntu 10.04? If not could you tell me the brands that do Work.
View 2 Replies
View Related
May 10, 2010
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
View 2 Replies
View Related
Jun 17, 2010
I have an external hard drive which connects to a usb port. until recently i could unmount it by right clicking on the desktop icon and selecting unmount. now when i try that it tells me that i can't because the device is not in fstab and i am not the root. i checked mtab and it had this line '/dev/sdb1 /media/usb0 msdos rw,noexec,nodev,nosuid 0 0' i changed that to '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' thinking that would fix it, but it didn't. i unmounted using 'sudo umount /media/usb0' and restarted my computer and now the line in mtab reads '/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0' and i still can't unmount without using the sudo umount command. i also tried adding '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' to fstab and that didn't help
View 2 Replies
View Related
Aug 2, 2010
I want to backup my documents, using Fwbackups, on an external hard drive (a LaCie Ethernet Disk mini). But I can't seem to access that drive from FWbackups. As a first test, I tried a One-time backup (to backup some of my personal folders).Using Nautilus file manager, I access the external hard drive simply by going to Network, then to "Edmini FTP" or to "EDmini SMB". But when I need to pick a destination folder in Fwbackups, I can't seem to find the external hard drive. I tried "local folder", then Browse, but Network doesn't appear.
(Can I find it somewhere else?)I tried "local folder", then copy pasted the location from Nautilus [URL] but that didn't work - I get the red button, and when I do try the backup, I get "ERROR : The destination folder [URL] could not be created: [Errno 2] No such file or directory: [URL] So how do I choose my external hard drive as destination ?
View 3 Replies
View Related
Aug 11, 2010
I am setting up a Linux laptop for my parents, and want to also create some backup scripts to allow them to easily back up to an external hard drive. [And for them to be able to use it, it has to be super simple.]
For security purposes (should the external drive ever get lost or stolen), I want to encrypt the entire device using TrueCrypt. That means my scripts will have to use TrueCrypt to mount the backup volume using the device name. [Right?]
Now to the actual question(s): 1) Is there a way to ensure that an external hard drive will ALWAYS be assigned the same device name when plugged in? [That would be the simplest solution for me.]
2) Alternatively, is there a way (using bash scripting) to "find" the device name of a particular external hard drive, even if it might not be known in advance.
View 2 Replies
View Related
