i recently installed ipplan on my server .. but cuz i am new at it i am nt any good . is there some way i can read or refer some book or website and learn all its functionalities ??
1. how do i create a new dns and assign bandwith to it ?
2. how do i assign bandwith to a specific ip in general ?
i am programming to get a real number to show real-time system bandwidth used ? that mean the bandwidth used at the time my fuction running? am using C language to do that. so help me please!
View 4 Replies View RelatedI have 2 ISP where give me IP Public with ISP A (/29) and ISP B (/28). So, I connect this two ISP to unmanaged switch. And from that switch, I take one cable connected to eth0 on the server. (Note : My server have 2 dev ethernet, eth0 and eth1). eth1 will go to the Switch which will go to the LAN.
My Question is : 1. Is this possible to make bandwith control on the gateway server with mode separating International bandwith and local bandwith (my country bandwith)? ie, for my Mail Server I will give the "intl bandwith" only 512 kpbs and for local bandwith with 1Mbps. What a software can I use for this model ?
2. Which model I should to used, with NAT or with Bridging router? That's all for now..
We are using squid deplay pools successfully in our lan and it is working very fine but now i want each computer bandwidth to be shaped for each port means that whenever the user make ftp connection with ftp software or whenever the user access outlook express for email each port like smtp,ftp,remote desktop connection will be shaped or otherwords each pc will get fixed bandwidth.
Our Broaband having 1Mbps connection and we have 16 user who access the internet so i want the 1Mbps will distribute in each user. Our Six Users of internet is our directors and managers of the company so i want to give them max speed and 10 users will get low speed.
Six Special users Ip address: 192.168.1.3 to 192.168.1.9. Other Regular users Ip Address: 192.168.1.10 to 192.168.1.20.
We are using RHEL4 AS U5 and Sendmail version sendmail-8.13.8. How to find out total mail transfer size (month basis) through Sendmail service. Is it possible in linux.
View 1 Replies View RelatedI have a webserver with a few users on and i wonder how i can limit the bandwith usage for each user on my server ?
View 1 Replies View RelatedI'm using mint 10 - ubuntu 10 derivative. I'm a programmer with 10 years experience with linux comfortable (but not a genius) with the command line. Adept with vim. My security knowledge is woefully low.
My bandwith usage has gone way up. To make a long story short, I am suspecting an intrusion of some sort on my machine. Currently I'm using a router with wireless turned off. I'm running iftop and the Rx total for today (still high) is showing 333MB.
For starters, I have two questions:
1)What should I be looking for in /var/log?
2)Any recommendations on software that might help here?
I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
I'm running Ubuntu 10.04 on my Lenovo laptop. Sometimes I use USB KB which doesn't have the Multimedia keys. It would be great if I will be able to control my Volume etc using some Keyboard shortcut. I know that this can be done using Preferences->keyboard Shortcut. But the problem is it "replaces" old key (e.g. dedicated volume key on laptop ) with new one which I don't want to happen. I want to keep both keys for same operation.
View 5 Replies View RelatedObviously I don't know that much about CPU architecture. I have a fancy new quad core CPU in the machine I just built. Now, given the current state of technology, two or many times three of those cores are pretty much sitting idle.My question is: Is there any way to utilize those extra cores with programs not optimized to take advantage of them? If I have some CPU intensive application, is there any way to tell it to utilize a core that's idling instead of the first core that's probably already got a bunch of processes running on it?
View 7 Replies View RelatedI have installed a ssh server on a computer (Ubuntu 10.04). This computer will be reboot many times, so the IP address is going to change. As a result, I couldn't connect with an other computer on this server via ssh. That's why I search a solution: either I assign a static IP on my server computer or I heard that I could use a dns name. I don't know if the latter solution is good so I hope to have some precisions. Also, I tried to have a static IP by editing the file : /etc/network/interfaces but it doesn't work.
View 5 Replies View RelatedI know their are several threads pre-taining to keyboard remapping, I own a Toshiba X205 S7483 laptop running Ubuntu 10.10 32 bit with the latest updates installed. I like this os overall but here is my question.
My laptop keyboard letter, "b" has broke and Im copying and pasting when I need to use it. Is there a way how I can change either the assigned b letter key to like one of the alt keys or windows menu keys or fn key?
how can one assign or change the label on UDF dvd+rw disks??
View 1 Replies View RelatedI am new with Linux but really be interested in it. I would like to ask that if it is possible to make each VirtualHost only controllable by a specific and different user? If so, how to?
View 3 Replies View RelatedHow can I assign a directory to a specific partition (another hard drive)?How would someone move / home/ username/music to another drive or partition? But do so in a way that it no longer writes MP3's (or FLAC) files in the original directory of the root drive?
View 9 Replies View RelatedI have a hdd of about 225gb when i installed ubuntu it gave a nice split down the middle on the partition and a 3gb swap. I tried to manually assign a data partition but was unsuccessful; kept getting a root error and couldn't fix it so i let it do it automatically.
Now win7 has a 60gb partition and the rest is on ubuntu side.
How can i give win7 more room? qparted for linux side or partition magic on win side?
Which will be easier for me?
My goal was to give win7 around 80gb and ubuntu about the same or less and make a third partion and name it "Data". Data will be storage for both os's or whatever.
I am using ubuntu 10.04 and opensuse 11.3. I would like to know how to assign each application to a specific worksapce. For example，when I open a pdf file, it will be moved to workspace2. When I open a movie, it will be moved to workspace3. In Leopard, "Space" have such features. I would like to know the way to achieve this in ubuntu and opensuse, in an easy way, meaning that just need to install a small package, not a big one , like compiz
View 1 Replies View Relatedbut is it possible to assign a key on the keyboard to make a specific letter - eg. ?
View 9 Replies View RelatedSamsung N150 LaptopI installed WICD. I can see all the wireless networks, and wired works fine, but everytime I try connecting to a wireless network it says, "Unable to get IP"Can someone help me remedy this? I am very new to ubuntu so I have no idea how to do ything..When I go to Network Tools, I see:Network Device: Loopback interface
IPv6 - Ip Address: ::1, Netmask: 128, Scope: Host
Network Device: wlan0
IPv6 - IP Address ::, Netmask 0, Scope Unknown
[code]....
I am trying to manually set up a number of static IPv6 addresses to one of the physical network interfaces on my 8.04server box.
I tried to use the "ip" utility like that:/ip addr add [myIPv6addr] dev eth0 label eth0:0
which was accepted by ip (no errors) and the IP address was correctly assigned to eth0. But using "ip addr show" I do not see any reference to the label I defined and "ip addr show dev eth0 label eth0:0" does not come back with anything (empty output).
This seems to contradict the information I found on the ip manpage and I wonder if this is a bug or a misconfiguration on my side. Did anyone successfully used the label functionality with ip?
Is there a command similar to MS-DOS's 'attrib'?? to hide the file??
View 4 Replies View RelatedI dismayed to find that Ubuntu Netbook Remix 10.10 no longer allows a user to assign the Super key (Windows key/Mod4 key) to keyboard shortcuts.
There seem to have been a number of unfavourable changes to UNR 10.10, but this is the worst. Super key functioning is essential for launching applications for many users.
I am no longer able to use UNR and I must uninstall it today. I think this is a shame, because I have always wanted to support it.
Using Ubuntu Server maverick here - after altering /etc/network/interfaces to use a static ip and checking /etc/resolv.conf (no alteration needed) no network services were working at all. Here are the contents of interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
broadcast 192.168.1.0
gateway 192.168.1.254
I was fairly certain that this was verbatim from my previous server which is no longer attached to the network. After hours of fooling around with no success I changed the address to 192.168.1.99 and it worked perfectly. So my question is: why? My old server used 100. Could the router refuse to give a new server the same address or something like that since that address had been taken in the past?
I would like to know if it is possible to assign new keyboard shortcut combinations for actions such as:
Action: switch tabs
Actual Shortcut: Control+(Alt)pgUp/pgDown
New Shortcut: Control+Tab (as it is on Windows)
Action: activate combo boxes item lists
Actual Shortcut: Alt+Down or F4
New Shortcut: still don't know yet
I have not found a way of doing this under gnome-keyboard-properties or gconf-editor.
I had created an amazon instance and installed my application and files, now my file size in increasing rapidly and I see only 4.5G of unused space in /dev/sad1 which would get filled very soon. How can i assign more space to /dev/sad1, i see /dev/sdb, having a lot of free space.
[Code]...
I am a certified newbie into linux. I am using now ubuntu 9.04. Now here is my question. Is it possible to assign your own IP address on your ubuntu desktop, I mean a fixed IP address? Because everytime I start my computer, my internet service provider will automatically assigned a NEW IP address to my computer, but when I'm on windows the ip address is fixed.
I've installed and configured lampp and joomla. I am trying to learn how to use the joomla under ubuntu using only my computer as my local host. But when I restart my computer, the IP Address that is assigned is different to what I used when I installed joomla so I cant access my website even if I am using the same computer when I installed it. Is it possible to assign a fixed IP Address to my computer under ubuntu.
my Apache2 was running fine for a while. Bur yeserday when I tried to start it again after a couple of weeks of vacation, I got the message:
* Starting web server apache2 [Sat Mar 20 10:48:12 2010] [warn] The Alias directive in /etc/phpmyadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.
[code]....
I'm using Ubuntu 9.10, and I want DHCP to assign an IP address automatically. I can ping my router, and get a reply. I just have no idea how to do this.I'm trying to get my Ubuntu machine onto my Windows network.
View 9 Replies View RelatedIs there an easy way to get a line from a text file into a variable in a bash script?
I have a file called outside_temp that has a single number, say, 63.2
I would like to make a variable in a BASH script have that value.
I know how to use the input redirection and reassignment of stdin using code...
how necessary it is to assign a password to the grub-boot loader? and how I go about doing it to make the system more secure.
View 7 Replies View Related