I'm running xubuntu 9.10 and would like to create audio cd iso files for some of the music programs I have recorded to my hard drive. The only gui I know of that might do that is k3b but I don't want to install a lot of overhead. One of the sites I found on the web said that xfburn could make iso images, but there is no button or menu item that I can find to do it.
View 9 RepliesI want to run SoundRecorder (or audacity). I just want to create a small audio file. I can't seem to get the mike to record. I start the record function and expect to see changes in the "Level" indicator that correspond to sounds that I utter.
-Search of google shows lots on solutions for non fedora 14
-FAQ - no hits
-Musicians Guide is 248 pages long and I did not see a solution for this simple case.
I have installed jack-audio, audacity and dependencies.
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View RelatedI would like to convert OGV files to audio format.
View 4 Replies View RelatedI have a mp3 file and would like to convert for video, the jpg will be the image of the video.
View 6 Replies View RelatedIn Sound Preferences I can see that there are a handful of predetermined profiles.I was wondering if it is possible to define other profiles. Specifically, what I want is an Analog Mono Output profile.
View 1 Replies View RelatedI want to create a few audio cd's and the only burning software I have is K3b. But when I open it a window is displaying that says there is a system configuration problem and literally saying:
Mp3 Audio Decoder plugin not found. K3b could not load or find the Mp3 decoder plugin. This means that you will not be able to create Audio CDs from Mp3 files. Many Linux distributions do not include Mp3 support for legal reasons. Solution: To enable Mp3 support, please install the MAD Mp3 decoding library as well as the K3b MAD Mp3 decoder plugin (the latter may already be installed but not functional due to the missing libmad). Some distributions allow installation of Mp3 support via an online update tool (e.g. SuSE's YOU).
knows any other program to create audio cd's
My 1st and only grandson turned 1 year old and we have taken about 1 million pics of him. I wanted to make a video from pictures taken in the past year. The first one is an ultra sound picture. The last one was taken this last Saturday. I have 153 12 MPixel pictures in a folder. They are named C001.jpg - C153.jpg (I can rename them if needed).
I had noticed mencoder or ffmpeg can create movies from jpegs. But, I didn't think about the frames per second. Would I need to make like 20 copies of each picture and then make it like 10 FPS? or something like that? Optimally, I would like to have a video where each picture lasts for 8-10 seconds or so and I would be able to add a song as audio. (I think I know how to use mencoder to add the audio).
What program can make audio CDs out of MP3 files? In Gnome.
A friend sent me a zip file of mp3s for an out-of-print cassette tape that I was trying to get for my husband to give him for his birthday and I'd like to be able to make a CD.
I've installed both fluidsynth and qsynth, but get this error everytime I run qsynth. I'm trying to use my m-audio keyrig 49 just to practice playing the piano. I don't really care about having a whole DAW and whatever, I just want to play my keyboard. Maybe there is a better way than qsynth? Also, this happens:
Code:
/etc/rc.d/rc.alsa restart
Loading ALSA mixer settings: /usr/sbin/alsactl restore
No state is present for card K49
[code]....
I don't know that it has to do with my qsynth problem or not. I just thought I'd throw it in just in case it does. Also, xmms recognizes my keyboard in the alsa preferences, where the mixer device is.
Kernel 2.6.21.5, GNU (slackware 12.0).
KDE 3.5.7
K3b 1.0.2
I have a FLAC file with 24-bit samples instead of 16 bits. I could use the flac linux command to obtain a WAVE file and then cdrecord to burn the audio CD. Unfortunately, cdrecord requires 16-bit digital audio as input. Is there a program able to author 24-bit audio CDs either from a FLAC file or from a WAVE file?
I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
Is there any program/script that can create a torrent file for each file in a directory? I have been looking all over but can't seem to find anything of the sort. I have 700+ files I REALLY don't want to make my self.
View 1 Replies View RelatedI want to create a logon script (or somesuch) that creates a file (if it doesn't already exist) and checks the file for some info otherwise. If it finds a given trigger in that file, it logs into a local database and does some operations.
Now my problem isn't with creating that file or even getting it to function as a logon script -- it's with permissions. After the logon script creates the file, I want that user to have read access on it ONLY. Further, I don't want to give the user any kind of root access so that they could do the database operations in question or chown/chmod the file.
What's the best practice here? I'm noticing that whenever the script runs (in .bashrc right now) the script runs with the current user's permissions. Ideally, I'd like to make it so the login script can run at a higher level of permissions, (higher than the user has). Is this even possible? What's the best way to do this?
So I use the following to rip audio from one .mp4 file and then generate one .mp3 file.
Code:
caleb@linux-vmp1:~> ffmpeg -i a -ab 128000 -ar 44100 01.mp3
Obviously, this takes a file named a and makes a file named 01 that is an mp3. It works great and I have used it many times. The problem is, I would like to rip the audio from several files all at once. I am sure there is a way to do it but I haven't stumbled upon the way to do it.
I am running Intrepid Ibex 64-bit, and I have recently ripped a cd with EAC on one of my windows boxes, and it produced a cue sheet and one single wave file for the entire cd. My question is this, is it possible to take the wave file, burn an ISO image that acts exactly like the original cd? In other words, take the single wave file, using the cue sheet splitting it back into it's individual tracks, and then reading the subsequent ISO image from a program like Sound Juicer, so it can write all the metadata and convert it with my own preferences. I know this is a very strange predicament, but it's one that would save me a world of hassle.
View 5 Replies View RelatedI have iMac 2.4GHz with rEFIT installed. I installed Unity on one of the partition. Kernel is still 2.6.38.8. I am getting error message when I run the command
sudo gedit /etc/x11/xorg.conf
The error message is
(gedit:2139): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.AC7YXV': No such file or directory
(gedit:2139): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
I was just testing specifying limit on file size to a user and have added the following to /etc/security/limits.conf bob soft fsize 100 This basically should have said not to allow bob to create anyfile greater than 100Kb in size.
But the interesting thing is, if bob already has any file which is greater than 100Kb in size, it even doesn't allow to log him into the system both from console and SSH. Also nothing is logged in logs.. How do I configure it so that, bob can login to the system even though he has any file greater than 100Kb (but doesn't allow him to create file which are greater than 100Kb) ??
I want to back up an entire Linux system on a 3Tb external Western DIgital USB3 drive.
I do not want to reformat it from what it is, apparemtly NTFS.
Is there a utility that can act like a file manager like mc, that will permit me to create an ever expanding (to 320Gb) TAR file that will retain all the original file permissions. I have had nothing but disappointment with Linux backup utils with a FAT32 external drive, and I am concerned if I just try an tar the entire drive at once, with around 3 million files, I might run out of memory.
All my torrents go to my home/username/Download/ folder, I could read/write yesterday but now I cant even copy the files to a flash drive.The error i get is "Cannot create regular file '/home/username/Download/file' : Read only file system.
View 14 Replies View RelatedI am testing my ftp server configuration.Anonymous download works , however anonymous upload does not.I am getting the following error message from both Windows and Linux 5.4clients : 553 cannot create the file.And i am running Fedore 12.
View 3 Replies View RelatedEverything in Linux is a file, right? And everything can be represented by a file? Is there some way I could create a block device file that represents (i.e., provides an interface to) this image file? If so, then I could use fdisk on the device file to split it into partitions, format the partitions, and then mount them as directories. I could create a file system within a file system, which would be fun.
View 2 Replies View RelatedWhat I plan to do is, create a duplicate file of a text file, and then append some text into the new text file.
View 1 Replies View RelatedWhich program can do it? Many can rip audio fil by file. I'm looking for software that can rip a whole audio CD to 1 file.
View 1 Replies View RelatedI have tried this file on multiple different video players, none of them will play the audio(mplayer, vlc and xine). Seems like a codec issue to me. I do have the medibuntu, and the w32codecs. Here is a screenshot I got from xine.
View 1 Replies View RelatedNow I have a problem with mencoder.When I tried to use mencoder to interpret a mp3 file (test.mp3) from 1:30 to the end like this :mencoder -o out.mp3 -oac mp3lame -lameopts cbr:br=128 -of rawaudio -ss 1:30 test.mp3I found it failed:ASF file format detected.asfheader]audio stream found, -aid 1Video stream is mandatory!Exiting.
View 6 Replies View RelatedI have a few music videos in mkv format that are edited. I'm trying to replace the words that have been edited out, but having trouble aligning the audio and saving a finished product. In Windoze I would use Goldwave and/or Multiquence for any simple editing needs. I tried using Multiquence via wine, but it needs DirectX and winetricks isn't enough to alleviate the problem.
I figured there must be some similar apps available for ubuntu and there definitely are, however they're not for simple editing like I'm attempting and more for the advanced user looking to do multi-track creating and editing. I've tried to find online tutorials and help via searching but am just getting a headache.
I would like to know how to demux the audio from a flash video file (copied from /tmp while browsing a video site). I would prefer to avoid re encoding if possible.
View 5 Replies View RelatedI've got a short mp3 file from the BBC's League of Gentlemen comedy show. In the clip, Papa Lazarou tells his dwarfs to put a poster in the local shop. Then he says "Tell them the circus is coming to town."I'd like to grab that sentence "Tell them the circus is coming to town" so I can make it into a ringtone for my phone or something.
View 1 Replies View RelatedI'm looking for a program that will allow me to remove the vocal from an audio file, and also provide the ability to remove background noise (as much as possible). I have an audio recording for a presentation we did at work recently, but the quality of the recording is not the best and there is quite a bit of background noise. I would like a way to clean up the file and amplify the vocals. I tried to use Audacity for this, but couldn't get it to work. Has anyone used a software program that provides this ability?
View 1 Replies View Related