I'd like to choose correct linux-header.it could be that I don't haave appropriete drivers for my machine (don't know)it's true sound and video works but when it comes to gaming everything works soo slow and I get multy freezes from wine + "log out" problems with some games not like from windows (dual boot)now I saw some linux headers from synaptic.
View 4 RepliesI was extraction some file through command line then I encounter on notification from winrar. This file exist what u want to do
replace
never
quite
I don't want that winrar will prompt me to choose action. Everytime whenever this situation occur it will overwrite / skip that file
Syntax I am using for unrar
rar e -pmypassword filename
Yesterday, I think I did something stupid: I removed kernel-headers, gcc, glibc-devel and glibc-headers. My box is a CentOS 5.4 webserver (it has loads of packages installed, but that was done through Virtualmin config, so it's quite coherent all in all). The thing is that now I need to reinstall at least the headers and glibc, but hey! this is what I get :
[Code]...
been a programmer for a while; on windows mostly but I'm starting to learn all that I can about linux software.I've picked up a funky little NAS which has ssh access to its (i believe uLinux) environment. I've also managed to find a compiler for it (gcc compiled for ARM - GNU/Linux).The plot thickens.I've had some headaches but I've now managed to compile Apache2 without DSO support... so far so good.In getting this far I've been told by a number of people i will need "the headers" specific to the device (the NAS didn't come with source code).
Since Apache 2 (without DSO) compiled fine I know i definitely have some headers. But DSO won't build with errors that lead me to believe it may be a header issue.The question:So i have some headers which educated guess work suggests to me that these are the headers for the std c/c++ libraries.finding "the headers" to know what they are the headers for
When I installed Wicd, and ran it for the first time, I got an error something like: "Could not connect to Wicd's dbus session- check the Wicd log file for more info". However, later when I restarted my computer, Wicd started, but I can't connect to my network, it shows up as <hidden>, I can connect to linksys, so I know that wireless is working on that computer. I know that there's nothing wrong with my wireless router, because I can connect to my network in this computer.
View 3 Replies View RelatedMostly just curious since everything works but in the essence of learning I'd like to know what this means.
Code:
The following packages have been kept back: linux-generic linux-headers-generic linux-image-generic 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
It is easy to see what is held back, so the question is why? I'm running Linux Mint 10 Gnome edition.
Code:
Linux 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686 GNU/Linux
I have just added an additional 1 tb drive to my system. Before I upgrade to 10.04 which should i choose to put my /home folder on and which should contain my sytem files and backup folder:
1. 1 TB 16 mb cache; or
2. 1 TB 64 mb cache
Also should I format the drive ext4 or ext3?
If I install "kde standard" form synaptic package manager, i will be able to choose kde at login. Is my understanding of this correct?
View 2 Replies View RelatedI am a new ubuntu user. Some problems about GRUB.
My pc:
Intel core i7 3.06 GHZ
Gıgabyte X58A-UD3R
9500GT
1 TB SATA2
4GB RAM
I HAVE A BIG PROBLEM. Starting from the beginnig. I installed Win7 Ultimate to my pc first. registered and updated bla bla.. then I divided into 3 partitions.
[Code]...
If I insert an Audio CD into my CD/DVD Writer, I cannot choose an application. So I launched Nautilus and chose Edit>Preferences>Media. Here's the problem. All options under Media Handling are grayed out and show "No application found" except for Software.Why can I not select any applications for CD Audio, DVD Video, Music Player, or Photos?I use Ubuntu 10.10 x64.
View 9 Replies View RelatedI just installed Ubuntu 11.04 amd64 on my computer alongside my Windows XP partition. However, on startup, my monitor displays "Video Mode Not Supported" which I assume is the Grub2 interface to choose my OS. Unfortunately, it keeps booting into Ubuntu, and I cannot change it. So, through the command line, I made the default OS on startup windows xp. But now I don't know know how to change back... Is there anyway I can change the display settings to be supported by my monitor (it's native resolution is 1440x900)Any help would be appreciated, Been using macs all my life, so I am a noob when it comes to Linux and Windows
View 1 Replies View RelatedFor two days I've been trying to update and install packages on a Lucid 64-bit system. It's a fresh install and I've never had any problems with any apt-get commands before in the two years during which I've installed Ubuntu on everything I own. It just hangs at 0% [Waiting for Headers]. I can provide more information if needed.
I suspect his may have something to do with it: (copied from terminal output)
Err [URL]
My sources.list:
# deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release amd64 (20100816.1)]/ lucid main restricted
deb-src http://archive.ubuntu.com/ubuntu lucid main restricted #Added by software-properties
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code].....
Is there anyway to make it so I don't have to use it? And just use the regular one which shows what Os's to choose from, like on most Windows machines when you dual boot etc?
View 6 Replies View RelatedKPackageKit sometimes tell me there are packages to upgrade, and some are tagged as bugfixes, and some as security upgrades. Are there any ways to find out from the command line which packages are which? I'd like to only apply a certain class, automatic, without using KPackageKit. Using 'apt-get upgrade' I get a list of upgradeable packages, but no list of which class they are. Is there a way?
View 1 Replies View Relatedi installed ubuntu 10.04 and accidentally choosen ext3 over my home partition ext4...and now it erased(?) all the files in my home folder...
is there a way to return the ext4 files??
I would like to include BPM data in all my id3 headers. I can do this one song at a time with banshee, but I have lots of songs, and it would take a very long time. In this thread I read about bmpdj and I am attempting to install this from source. I run into problems with the make command which gives me:
Code:
Link targets:
User Interface Resources:
[uic] ui-about.h
[uic] ui-album.h
[uic] ui-beatgraph.h
[uic] ui-bpmcounter.h
[uic] ui-bpmdj-pref.h
[uic] ui-bpmmerge.h
[uic] ui-capacity.h
[uic] ui-clustering.h
[uic] ui-freq-mapping.h
[uic] ui-importing.h .....
Source Files:
make[1]: *** No rule to make target `profile-clock.o', needed by `profile-clock'. Stop.
make: *** [.source-creator] Error 2
I don't know what profile-clock.o is, or what package provides it.
I am a somewhat new user to Ubuntu, and I just upgraded to 10.04 from 9.10. I did not do a clean install, just an upgrade by running "update-manager -d". Once I upgraded, lots of problems started happening:
- I booted up, and nothing came up but text like in a command prompt; not a splash screen. Is that correct? - When I logged in, none of my windows had tops (i.e. Window Title, Buttons for minimize, maximize, and close). I changed the theme and turned on the max graphical effects, and that fixed it. (by the way, I know my graphics card can handle it because that is how it was set up on 9.10)
- ...Then, I took off the bottom panel and added Docky. Once I added my icons to it, I restarted, and then the window headers were once again gone, and Docky popped up a message in the top right saying it needed Composite support turned on (i.e. Metacity or Compiz). I turned it on in Metacity (I also have Compiz installed), but nothing changed. So now I have no tops to my windows and have to resort to ALT+F4 to close windows, etc, and I have a huge black rectangle taking up the lower 1/4 of my screen that is just black, with Docky in it...it isn't just a border around it like some other posts have said, but rather takes up almost half my screen.
When I logged in, none of my windows had tops (i.e. Window Title, Buttons for minimize, maximize, and close). Also docky give an error msg : Docky requries Composting to work probably. And I should click on compiz fusion icon and select compiz window manager every time I boot up. So how can I fix it please??
View 6 Replies View Relatedi am trying to install: kiso-0.8.3 but when I try ./configure I recive this error >>>>>>>>>>
configure: error: Qt (>= Qt 3.2) (headers and libraries) not found. Please check your installation! For more details about this problem, look at the end of config.log
I'd like to upgrade a live ISO file before burning a new CD.
So, following the instructions in "How to Customise the Ubuntu Desktop CD", I chrooted to the squashfs and ran "apt-get update/upgrade/dist-upgrade", expecting apt-get to upgrade the chroot kernel... only to find out that apparently, even when being chrooted, this command upgrades the actual kernel. I guess it makes sense, but I was under the - wrong - impression that chroot would build a filesystem totally isolated from the underneath host.
So I rebooted to use this new kernel:
Next, since the Nouveau video driver requires the kernel header files, I ran the following:
Code:
I don't understand why apt-get upgrades the kernel but won't install its header files.
I have a script which uses a function and also uses expect.
If I have #!/bin/bash as the first line, the function is recognised. The expect calls are not, failing first with spawn.
If I have #!/bin/expect as the first line, the expect and spawn work fine. The function is not recognised.
My friend Google brings up examples with both these lines one after another in script files, just like Im doing. Except for me it doesnt appear to work.
Where am I making my beginners mistake in not understanding how this works ?
I'd like to upgrade a live ISO file before burning a new CD.
So, following the instructions in "How to Customise the Ubuntu Desktop CD", I chrooted to the squashfs and ran "apt-get update/upgrade/dist-upgrade", expecting apt-get to upgrade the chroot kernel... only to find out that apparently, even when being chrooted, this command upgrades the actual kernel. I guess it makes sense, but I was under the - wrong - impression that chroot would build a filesystem totally isolated from the underneath host.
So I rebooted to use this new kernel:
Code:
# uname -r
2.6.32-24-generic
Next, since the Nouveau video driver requires the kernel header files, I ran the following:
Code:
# apt-get install linux-headers-$(uname -r)
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
Today I had this weird new icon appeared on my Cairo dock (The grey rectangular box sitting in the middle).Right click on it, choose whatever action, it just won't disappear
View 9 Replies View RelatedHow do I choose a wireless network to connect to? The Ubuntu 8.10 help tells me to open NetworkManager, but the only thing I can find is 'Network Configuration' in System>Preferences. If I try to run NetworkManager in usr/sbin as a root, nothing happens whatsoever. nm-tool lists several available Access Points for my WiFi antenna.
View 2 Replies View Relatedhow do i choose to write in assembly on Gedit? is it "Makefile"? i'm writing for ai386
View 5 Replies View RelatedI have three routers (linksys wrt54gl, ddwrt). I'm trying to use wds bridging, got two of them linked, but not the third. All three routers have the same SSID. I'm using Ubuntu 10.04 netbook remix.
My problem is I need to choose which of these my laptop connects to. Right now it connects to the one router which isn't playing nice with wds. I need it to connect to one of my other routers. I see the other signals using nm-tool, but they don't show in nm-applet. I created a connection in NetworkManager specifying the SSID + mac address of the correct router, but the tray applet doesn't show any options for connecting to manually configured networks, and I can't find any other useful app. I suppose I could rtfm for iwconfig et al, but Ubuntu ought to have an easier way.
This Ubuntu desktop has 3 network interfaces:LAN eth0: ip address 192.168.3.6 gateway 192.168.3.1VPN tun1: ip address 192.168.7.4 gateway 192.168.7.1VPN tun2: ip address 192.168.9.2 gateway 192.168.9.1For Chrome or Firefox, by default the 192.168.3.1 gateway is used.How do I change this such that:I can manually choose the 192.168.9.1 or 192.168.7.1 or 192.168.3.1 gateway.From the command line.Before running Firefox/Chrome.Without re-configuring any network interfaces.So that ONLY Firefox and Chrome browsers are affected
View 1 Replies View RelatedHow do i choose a previous Kernel without a GRUB?? I have a netbook with only Ubuntu (UNR) installed so every time i update my kernel and so on i cannot see/choose the kernel version i want (i believe it enters the most recent one by default). Is there a way to do that without a grub or i have to install it even if i dont have a second OS?
View 3 Replies View RelatedI had an dualboot problem, after updating ubuntu to 10.04 my windows vista option in the grub of ubuntu was gone.Now I have installed windows 7.And the grub does not appear again, there is no grub at all.Now sombody told me I could fix or repair the boot record in windows 7.Does somone know how I can repair the grub in which I can choose between windows 7 and Ubuntu?
View 6 Replies View RelatedI am currently using Ubuntu Lucid on my desktop (stats are in my signature). I have an older computer, with an Intel i8xx chipset as my graphics card. This has had some instabilities on the previous two Ubuntu releases for me (10.04 and 9.10) which I am hoping will be fixed for Maverick, but thankfully the Ubuntu Wiki managed to provide me with fixes.
After much tweaking and some luck, I was able to get Ubuntu to work without constantly crashing on kernel versions 2.6.32-21, 2.6.32-22 and 2.6.32-23. Unfortunately, when 2.6.32-24 and 2.6.32-25 came out, I was unable to cease the crashes.
While I am still looking into tweaking the latest kernel version to work perfectly, I would like to know if there was a way for Ubuntu to default boot into a kernel other than the latest. This is because I want to run 2.6.32-23 by default (the latest kernel that I have tweaked properly) until I can configure 2.6.32-24 and 2.6.32-25 as well. I have less computer-savvy family members that use my desktop as well, and it would be a pain for them to have to press shift at every boot and have to select the correct kernel.