I'm trying to print files to a printer that is connected to my Ubuntu machine. Basically the printer server (and client) is the Ubuntu machine. The other client machine is a Windows 7 laptop. I have followed many tutorials and guides on how to enable printer sharing. For some reason I can't get the printer to be listed as an available printer.
View 5 RepliesI have Ubuntu 10.04 running on my desktop PC. My wife's laptop is running Windows 7. I have our Canon MP490 printer attached to my PC and I'm trying to share it so she can print from her laptop.
The printer works fine and I can print from Ubuntu. I have a VirtualBox VM running Windows XP and it can access the shared printer and print with no problems.
I have these printing related lines in smb.conf:
Code:
[Global]
load printers = yes
printing = CUPS
printcap name = CUPS
[Code]....
I have an Ubuntu laptop running 10.04LTS. I want to share its printer with a WinXP laptop. How do I get WinXP to find and use my printer connected to an Ubuntu 10.04 laptop over a wireless network?
View 2 Replies View Relatedafter much flaunching around for several days, I was able to access a windows based printer on my network from this Ubuntu 10.4 laptop. What I first discovered was I had to install Samba and Cups (cups was already installed as it turned out). Having done that, I tried several iterations of discovering the HP printer attached to a Dell Latitude on my network. Nothing.Then I read something, somewhere about using the IP address of the Latitude instead of the network name (Latitude). So I peeked into the router to find the IP address assigned to Latitude and VOILA! I plugged that into the box for location,along with the name of the printer and it did the rest. Actually it found the right drivers and did the rest.
I see a problem with that protocol, however. If I reset the router, which I have to do once a week or so, I fear that the IP assigned to Latitude will change. As it is, it has 192.168.2.2 but if I reset and bring up my Asus first, I imagine Latitude will end up with ~.2.3, in which case I have no idea what will happen.
So I have a Ubuntu box with a printer trying to share it's printer with a Mac using cups over ipp. Has anynone else had trouble with this?At first the printer would be stuck in the busy state according to the Mac. Any attempt to change it's state would only work for a split second. Then I found on the ubuntu help site (https://help.ubuntu.com/community/Ne...tingWithUbuntu) a command the run on the Mac,
cupsctl BrowseRemoteProtocols=cups
This works temporarilyand allows printing, but then it fails again some time later, seems to last only to the next restart (which isnt a long time for a laptop).
I want to share some folders over a network but, when i right click a folder I don't see sharing option in the menu that used to be in Gnome 2 I'm using Fedora 15 with Gnome 3 .
View 1 Replies View RelatedI have installed Ubuntu 10.4 LTS and I want to share a printer on that computer with my windows network (mix of XP and Vista). I have network connectivity and and can see other windows computers and they can see me, I am just stumped on how to share a printer on my linux machine with all of the Windows computers on my network.
View 4 Replies View Relatedi have a printer which is shared across the network. All the computers have ubuntu installed. I want that some computers should not be allowed to use this printer.
View 8 Replies View RelatedPrinter sharing on my Win home network.
The problem is it won't. I have an Ubuntu (11.04) computer cabled to a Belkin wireless router. The Brother printer is usb connected to the Ubuntu box - there is no problem printing directly. However, I need to print from a separate wireless connected Win7 box to the printer on the Ubuntu box and this does not work.
The Win7 can see all other Win computers on the network, but not the Ubuntu. Answers at my level gratefully received (eg: it took me two weeks, many hours and 3 re-installs to get dvds to play on Ubuntu 10). Current printer sharing information on the internet is either hopelessly above my head or outdated.
I did a fresh install of Lucid alongside Vista on my laptop, a Toshiba Satellite A205-S5804. When I went into "Personal File Sharing" under System > Preferences, it said that the necessary packages were not installed. Using the documentation at this link: [URL] I went into a terminal, opened shares-admin, and as promised it told me that I didn't have the right software installed, and allowed me to check both NFS and SMB to install. I did so, installed, and at the end, it said everything was successful.
After exiting the dialog, the window asking me to install NFS/SMB appeared again. I selected to install, it disappeared, and then reappeared. It did this repeatedly, until I decided to close it out. I then went back to the guide, and went to add a new share. But the drop down box would not allow me to choose Windows share, only Unix (NFS). How do I enable Windows File sharing? I have used Ubuntu in the past and have got it to share with Windows computers flawlessly. Now, it appears that this essential (for me) functionality is broken.
In my firewall I have these ports open:
21
143
110
[code]...
I have have recently installed Ubuntu 10.04 on my desktop pc and set-up a shared folder and a shared printer from the Ubuntu desktop. My shared folder works completely fine and is easily accessible by my windows xp laptop. My printer sharing initially worked fine and I was able to connect and print from the windows xp laptop. Unfortunately, after a reboot of the ubuntu computer the printer is no longer found by the laptop (the shared folder, however, still works fine).
I can get the shared printer working again by using the following command to restart Samba: -
sudo service smbd restart
After restarting Samba, suddenly my laptop can see the printer again. I don't particularly want to have to restart Samba every time I boot up my computer. I understand I could probably make a script that would restart Samba automatically after booting or logging in, but I would rather fix the actual problem than use a workaround like that.
Using 10.04. I use one machine mostly as a printer server: If it goes down for whatever reason I want to restart without having to enter any password. Samba seems to start and allow file shares, but does not start the printer sharing so I must manually enter "sudo restart smbd" to allow the printer sharing. From reading the various threads I guess that the samba "start command" is before the printers are "initialized" and thus are not "setup". So how can I make the samba "startup" last after everything else? I am not enough familiar with all of the commands to understand the thread posting to make it work.
View 2 Replies View RelatedI have a parallel printer working on a desktop. I want to share it with my laptop, but I don't want to have to use samba. Both have ubuntu 10.04 installed.
I'm sure it can be done, but I'll be darned if I can find anything in the skimpy admin. tools.
I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
I just installed an HP Officejet 6200 on a Slackware 12.1 machine. It uses a USB interface. If I am on the machine, I can print to it with no problem. When I am on my Debian or Centos machines, I cannot. I have midified the cupsd.conf file to allow everyone to connect to it but so far have not had any success. Port 631 is open on all machines. I have explicitly added a hosts allow 192.168.0.0/24 line in several portions of the conf file with no luck. If I use the cups interface on any of the machines using localhost:631 as the address, I can not only see the printer I can print to it, but I noticed, I am actually attached to the Slackware machine where the printer is located. Can someone suggest a debugging method to help?
View 7 Replies View RelatedI am having problems trying to share a printer on my desktop. The printer is an HP Laserjet 1020, and the desktop is running 64-bit Ubuntu Karmic. None of the other boxes on the network (wired/wireless, 32-bit/64-bit, Ubuntu Lucid/Win7/XP) can access the printer.
I have checked all of the appropriate boxes in printer properties and server settings. When I try to install the printer on the other systems, I am asked for a username and password on the desktop. I set up a user named "printer" and gave it a password, but when I try to use that username/password to install the printer on one of the other systems, I get an "access denied" error. All of the networked systems can see each other, and access shared files.
i have some problem that difficult to solve.i'm using linux debian.how can i get sharing printer from windows 7??
View 3 Replies View RelatedI am trying to set up a LAN with some basic file and printer sharing, as well as either a VPN or FTP server. I am setting up a server for an office with about 4 computers and one remote computer at a home office. I would like the server to back up a selected group of folders on all of the computers as well as share some printers between them all as well. If all of the other computers are windows computers will Ubuntu work for something like this? I would also like to host a website and e-mail server as well if the server is not loaded down too much. I know I can get windows server to work, but I would like to use something else if possible.
View 3 Replies View RelatedI installed it on a desktop today to try it out. So far I'm loving it and have gotten everything to work except for one thing:
There's a printer connected to it (HP PSC 1600), and I'd like the other computers on the network to be able to print to that computer. The other computers are running Windows 7, and one is running Snow Leopard.
When I plugged in the printer, Ubuntu recognized it almost immediately and installed it. Wonderful! I then went ahead and set it to be Shared, and hoped for the best. Neither the Windows machine or the OS X machine could find the printer...even after I pointed them directly at what I thought was the CUPS address (\mycomputername:631). To make matters even more confusing, I was able to set up shared folders and have the other computers be able to view them.
I'm going to be setting up our company with a in office server in the next few days. I wanted to use ubuntu as my servers OS but after reading some of the documentations I come to realize there is no X server in the server OS. I am OK with doing everything in terminal but would prefer to do some things in a graphic interface. Am I able to install the Xfree86 and be able to configure some stuff through that? Also the machine I am building for the server is not a true server machine just a really fast computer with lots of memory and space. The specs are a 3.1 AMD 64bit processor, 16gig ram, 2x 1TB hdd 7200rpm sata.
If the X server isn't a possibility on the server OS, I have read you can install all the server repositories on the Desktop Editions. Would that be a better option for me? Here is what I would like the server to do. I am going to be running quick books on the server with 1 workstation that is dedicated to it. We have 3 workstations and 3 users. We also would like to implement a Shared filing system and print server. Eventually when our current contract with our web host expires we would like to migrate the base website (not the ecom side) to this server.
I've recently bought a nice little HP LaserJet 1200, which was easy to configure and setup locally. However I wish to share the printer throughout the house with up to three/four Windoze machines.
I think it would be best to set this up perhaps using IPP rather than Samba, as I can't seem to get any of the Windows machines in the house to see my SUSE Box, shame really, seeing as it's superior ha ha
We are running RedHat Enterprise Server 5. We have a Windows 7 Pro with an HP Printer attached to it, and shared. I can see the printer in RedHat, but everytime I send a print job, it just does nothing but sit there. I've even tried to attach to it via smbclient, and I get the following response: tree connect failed: NT_STATUS_BAD_NETWORK_NAME
View 4 Replies View RelatedI have got a wireless network in my house with a router as the hub and my Linux Laptop and Macbook connecting to it. I have got a wireless Kodak printer which the Macbook uses, but they do not have any drivers for Linux. I have enabled ssh for both the laptops and have enabled "Print sharing" on the Macbook. Can I access the printer from the Linux laptop via the Macbook? When I have sshed to the macbook, the kodak printer comes up in the list of printers to choose from...but the printing job just goes to the queue, but does not actually complete. Is this because I have not got the drivers for the linux laptop?
View 1 Replies View RelatedI'M Batty from Tanzania ,i have question on printer sharing between linux GNOME(FEDORA) and windows xp how is it possible?i had my HP printer connected on Linux and i need to make network sharing for the printer .please give me support.
View 4 Replies View RelatedI have a printer connected to one PC running slackware. The printer is set up to be shared through Samba and I can print to it from my Windows laptop.I would however like to use that printer from another Linux machine (running Ubuntu).Do I need to go through Samba to do this or is there a better way with it being linux-linux?Everything I've found on google relates to going from Linux to Windows unfortunately.
View 5 Replies View RelatedI'm using Amarok 2.3.2 on openSUSE 11.3 with KDE 4.4.4r3. How can I enable DAAP sharing of my Music library so that I'm able to access it in Rhythmbox from my Linux Mint 9 desktop?
View 1 Replies View RelatedI have:
1) A desktop PC running Ubuntu 10.04 and a Virtualbox guest, Windows XP. My printer is connected and operates via XP. Yep, its a Windows-only printer, but the VB file-sharing allows me to print Ubuntu files.
2.) Another desktop running Puppy Linux.
3.) A netbook running XP as a native install.
No. 1 and 2 are connected to a Level One router by ethernet cable. No. 3 is wireless. All 3 machines work fine independently, with no problems accessing the internet. Getting these machines to "see" each other seems to be harder than falling off a log! How to share files and the printer, especially on how to configure the router. The manual that came with it doesn't seem to explain how to do this. It assumes that all your devices are either wired or wireless, with no hints about how to network wired and wireless machines together.
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
I've checked the forums for a guide to sharing my printer with a laptop and cannot find any entries that are specific to my configuration. [URl]... My printer is connected to a desktop running Fedora 13. I also have a laptop running Windows 7. There was one web entry that spoke about "Windows Vista 7" that didn't match my configuration. [URL].. Is there a "how to" out there that I can follow to make this work? I am not a well-experienced user, so the more detailed (and accurate) the steps, the better!
View 3 Replies View Related