Ubuntu :: How To Bunzip2 Sparse File
Dec 8, 2010
I have a bzip2 compressed disk image, and I would like to uncompress it again onto my disk without using up lots of space, in fact there isnt enough space on my disk if I were to uncompress it as is. However it was a sparse file with lots of space in its original form, so I know it will fit if I can uncompress it directly as sparse. Is there some combination of bzip2, cat, cp, dd or friends I can use to pipe the output from bzip2 directly to a sparse file again?
View 1 Replies
ADVERTISEMENT
Jul 31, 2010
I have a bunch of disk images, made with ddrescue, on an EXT partition, and I want to reduce their size without losing data, while still being mountable. How can I fill the empty space in the image's filesystem with zeros, and then convert the file into a sparse file so this empty space is not actually stored on disk?
For example:
> du -s --si --apparent-size Jimage.image
120G Jimage.image
> du -s --si Jimage.image
121G Jimage.image
This actually only has 50G of real data on it, though, so the second measurement should be much smaller.
This supposedly will fill empty space with zeros: cat /dev/zero > zero.file rm zero.file But if sparse files are handled transparently, it might actually create a sparse file without writing anything to the virtual disk, ironically preventing me from turning the virtual disk image into a sparse file itself. :) Does it? Note: For some reason, sudo dd if=/dev/zero of=./zero.file works when cat does not on a mounted disk image.
View 4 Replies
View Related
Jul 19, 2011
Since there is no directory recursive option for bunzip2, any ideas on how to do this as I have lots of .bz2 files scattered throughout from an unknown archive program.
View 3 Replies
View Related
Jun 24, 2010
I have a matrix of dimensions 100 x 100. It is a sparse matrix. It has 460 non-zero values (9540 are zero values).
I want to find inverse of this matrix.
View 14 Replies
View Related
Dec 29, 2010
I am interested in setting up speech recognition on my notebook. I have installed Sphinx3 and pocket_sphinx for my distro (Fedora 14), but have googled without success looking for an entry-level guide to get me started.I am wading through the doco at CMU, but I'm finding it hard to relate their text to the installed files on my system. They assume the user has downloaded and compiled from source, whereas I just used 'yum'.
Better: is there a front-end which presents a more usable interface than the fairly sparse man pages available? The sphinx3* tools do not seem to have any man pages and pocket_sphinx has man pages that assume I know what I am doing. As far as speech recognition is concerned, I am very much a pbeu (poor blinking end user) with no training.
View 5 Replies
View Related
Feb 3, 2011
There is a very conspicuous inaccuracy in the output of df. I should mention, that it was noticed to to a sudden change in the amount of space that was left on the backup partition. The df -h command produces the following output.
[Code]...
View 3 Replies
View Related
Jul 16, 2010
I would like to convert OGV files to audio format.
View 4 Replies
View Related
Nov 7, 2010
I want to convert fdf file to xsf file or xyz file on ubuntu 9.10_32 bit .
View 5 Replies
View Related
Jul 25, 2010
I downloaded three iso-images, 1 dvd-image and 2 cd-images:
openSUSE-11.3-DVD-i586.iso
openSUSE-11.3-GNOME-LiveCD-i686.iso
openSUSE-11.3-KDE4-LiveCD-i686.iso
Being paranoid, I created iso-files from the burnt DVD-R and the two burnt CD-R to verify integrity.
The iso-file of the DVD-R was identical to the downloaded image. Both iso-files created from the CD-R were different in size.
The original size of openSUSE-11.3-KDE4-LiveCD-i686.iso is 719.323.136 Bytes.
I only got 718.938.112 Bytes when recreating an ISO-file from my CD-R.
The CD-R is from Sony. When the length of my ISO-file doesn't correspond to the downloaded one, the checksum file verification doesn't work.
View 3 Replies
View Related
Apr 6, 2010
i have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies
View Related
Mar 3, 2011
I have a linux.img image for ubuntu.I want to edit file inside it, how can open it, edit a file, then remake the bin file?
View 7 Replies
View Related
Dec 16, 2015
I am trying to upload some pics on my Facebook account using Firefox. When I click on Facebook's file upload icon, Firefox bring up a 'File Upload' window. I noticed that smaller image file is previewed on the lower right hand corner, while bigger image file is not. Is there anyway I can change this behavior or maybe change what Firefox is using to browse my files?
View 2 Replies
View Related
Feb 15, 2010
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies
View Related
Jun 2, 2010
I downloaded the demo of Penumbra Overture, it is a .sh file (113Mb). I can't open the file. In a terminal I ran chmod +x PenumbraOvertureDemo-2553.sh and then sudo ./PenumbraOvertureDemo-2553.sh and I get an error "./PenumbraOvertureDemo-2553.sh: 2: Syntax error: "(" unexpected" . The quotation marks are my own. Is the file corrupted? One of my lugmates thinks it might be a shar file, but Karmic says that it is a shell script. Another friend says that it is too large to be a shell script. Here is the code:
john@john-laptop:~$ cd /home/john/00
john@john-laptop:~/00$ chmod +x PenumbraOvertureDemo-2553.sh
john@john-laptop:~/00$ sudo ./PenumbraOvertureDemo-2553.sh
[code]....
View 4 Replies
View Related
Jul 21, 2010
I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
View 7 Replies
View Related
Jul 27, 2010
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies
View Related
Aug 8, 2010
I was looking to download "America's Army" and was doing alright until I hit a slight snag, It had an error while loading libgtk1.2, so I scoured the Internet for a way to fix this and the find command I found just told me it couldn't find the package, this is the first error I got when I tried to uncompress the "America's Army" version I downloaded:
/home/zac/.setup3597: error while loading shared libraries: libgtk-1.2.so.0: can not open shared object file: No such file or directory.
View 1 Replies
View Related
Aug 24, 2010
When i open any .pps file with OO.org (impress), it starts a slideshow and it doesn't let me edit the file. If i click on "end slideshow", the program exits.i ran it in a terminal and there's no error messages.[EDITED]Well, i found the answer, just renaming it to ".ppt".
View 2 Replies
View Related
Oct 31, 2010
Code:
cat ${SOURCE}/{start,universal,index,end}.txt > ${SERVER}/index.html
cat ${SOURCE}/{start,universal,02042010,end}.txt > ${SERVER}/02042010.html
[code]....
View 3 Replies
View Related
Dec 22, 2010
I followed [URL] that thread for installing BitPim on 10.04, but am getting this error:
Quote:
Traceback (most recent call last):
File "/opt/cx_Freeze-3.0.3/initscripts/ConsoleSetLibPath.py", line 35, in <module>
File "src/bp.py", line 20, in <module>
File "src/bp_cli.py", line 21, in <module>
[code]....
View 1 Replies
View Related
Apr 22, 2011
I am curious if perhaps I am doing something wrong extracting pages from a pdf doc using pdftk and creating a new file. I am only extracting the odd pages from the file and outputting them to a new file that is now only 20 pages instead of the input's 40 pages, yet the new output file is still 1.4Mb in size, the same as the original.
It seems strange to extract only half the pages of a large document and end up with a result that is the same size. how to streamline the resulting pdf's using pdftk?
BTW this is the command I am using, in case perhaps I am missing an option to optimize file size or something:
Code:
pdftk A=ch15.pdf cat A1-40odd output odd.pdf
View 1 Replies
View Related
Jul 25, 2011
I have recently switched to using LXDE on my PC and I am on the whole pretty pleased with it. However,PCMan is giving me a really odd problem. Some of the files/folders are being displayed in the wrong order where they contain numbers. They are being ordered by their first digit not the whole number.
[Code]...
View 5 Replies
View Related
Apr 14, 2010
Is there any program/script that can create a torrent file for each file in a directory? I have been looking all over but can't seem to find anything of the sort. I have 700+ files I REALLY don't want to make my self.
View 1 Replies
View Related
May 11, 2010
I've got a problem with running a program called Synapse in ubuntu 10.04.
When i run "runSynapse.sh" script nothing happens. Then i tried running it from terminal with sudo command and this is what i got:
Code:
error while loading shared libraries: libalter.so.1: cannot open shared object file: No such file or directory
I checked the synapse directory but libalter.so.1 was there.
View 1 Replies
View Related
May 28, 2010
I have asked this over on Launchpad and have found bugs filed on the eclipse bug tracker but it seems to be going nowhere so I guess ill ask here.
I am using Eclipse for some development work and having saved a file, defocus the eclipse window (to test changes in a browser) when I refocus the eclipse window I get the following error...
The file 'path omyfile' has been changed on the file system.Do you want to replace the editor contents with these changes?
I have searched and searched and this seems to be a CIFS/SAMBA problem. I even found one solution suggesting that changing his mounts from cifs to smbfs fixed his problem however that would appear not to be an option for me since using smbfs in the fstab causes cifs mounts. This problem would seem to occur in Bluefish as well as some other IDE's so it is not an Eclipse issue.
---------- LINKS TO RELATED ----------
Launchpad Question
Eclipse Bug
--------------------------------------
View 2 Replies
View Related
Jun 3, 2010
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies
View Related
Jun 29, 2010
I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
View 2 Replies
View Related
Jul 11, 2010
I'm only just starting out with the Linux ubunto 10.04 OS after yeas of wasted time on Microsoft os's,I hope I'm posting this request for help in the right forum thread, if not please accept my apologies, I have tried searching everywhere for help in installing a firmware file into the File System / lib / firmware directory and each time I get an access denied result. The file is for a DVB board and I have managed to track down the right Linux fw file for this particular piece of equipment, Could some kind helpful person either explain how to get this firmware file into the Root System directory or even send a link to another site that deals with this sort of problemI've downloaded all the programs via the Ubuntu Software Center that should be able to perform this task however all to no avail.The reason why I posted this thread in this forum board is that it (in my own personal opinion which may be wrong) seems to me to be a security problem
View 1 Replies
View Related
Aug 15, 2010
In Ubuntu 10.04 I installed VMware workstation 7.1 to run a VM - everytime I need to run it though, Workstation doesn't find a file (VMmon) and I need to run in terminal this command: sudo /etc/init.d/vmware start
How can I add this in the boot file so it starts automatically and I do not have to run it manually -
View 1 Replies
View Related
Sep 6, 2010
Whenever I try to install a game thats in a .run file format, I get the following error. libgtk-1.2.so.0: cannot open shared object file: No such file or directory
I am trying to install Unreal Tournament.
View 4 Replies
View Related
