I have just upgraded my gnome version from gnome 2 and gnome 3 and its not working as I had hoped. The graphics seem laggy and when I go to aditional drivers, I see that my nvidia card, while active, is not in use. anyone have this problem? If so, how did you fix it
View 5 Replies
how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View Relatedis there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
View 1 Replies View RelatedIn Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedI installed the "recommended" graphic driver that pops up at top right and once I restarted the laptop, my graphics card no longer works with Ubuntu.
using Nvidia GeForce GT240M
I've put a second video card in my computer running 9.10(64-bit) to setup a 3rd monitor.
I'm using the following video cards with the 190 driver from nVidia:
Video Card 0: nVidia GeForce 9500 (PCI express x16)
Video Card 1: nVidia GeForce 6200 (PCI)
but when i run lspci the second video card isn't seen in the list. The bios is set to automatic detection, and I've seen it work on a identical second system that has windows 7 so I know the bios is capable of running the two cards concurrently.
I've verified the 190 driver is compatible with the 6200 series and have tested it by setting the bios to use the (PCI) device manually.
Is it possible to run a box with 2 graphics cards in it with one card being a PCIe x16 and the other being a PCIe x1?
Unsure whether this would cause all sorts of problems with ubuntu and/or the nvidia drivers (2 quatro NVS 290's).
I want to run a system that acts as a basic file server, I want to remove the graphics card for the sake of power saving and less heat in the box. My machine can boot without the GPU, and I can ping it and use putty to do things, but I'm still new to Linux and don't really know what I'm doing so GUI is best for me atm.
From somewhere I picked up that this is possible (the XDMCP server machine can have no GPU). This post here [URL].. seems to be what I am looking for, but I don't know how to "convert" these instructions to Ubuntu (the files mentioned do not exist on my install anyway).
[Code]...
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
View 8 Replies View RelatedWhat is the best graphics card for running compiz and win 7, geforce 5700le agp, geforce fx5200-dv128, geforce 5600ep agp or geforce mx4000-dv128 agp?
View 2 Replies View RelatedI want to update my graphics card :s How do i do it ?
I run ubuntu 10.04
I have the latest Ubuntu version with the PAE so that I can have the 4 gigabyte ram memory. I have had difficulty in fixing the graphics card. What should I do?
View 1 Replies View RelatedUbuntu is not the problem; I don't think. I'm running Maverick 10.10. With my computer I have to unplug and plug back in the graphics card every time I want to start up the computer so I usually keep it running 24-7. There was a power surge and when I got it back running, once it reached the load boot screen and it was stuck their for awhile. Then it instantly sent me to x-term. So I tried logging in and typing:
sudo start gdm
It said it was already running but I could not display anything or login the normal way. I restarted and the same thing happened. I managed to get to Recovery Mode and I fixed broken packages and then I ran it in low graphics mode. It said that the display, monitors, input, and graphics card could not be detected. If there was a way to resize the screen to something more tolerably than 800x600 in low graphics mode I'd be glad to hear it. I could at least stick around to using that until I can fix some stuff up.
I've just installed ubuntu 10.10 on my desktop system. it worked fine with my 5770 but when using my gtx 460 it has a crashing problem. After roughly 30 secs running the screen has a red cast and a grid pattern to the bottom right of the mouse. Need directions to solve this such as new drivers or an exact sequence etc as i've only got 30 secs to completee process before it freezes. Specific graphics card is a gainward gtx 460 GLH too btw
View 4 Replies View RelatedI purchased a new computer and the desktop has a 512 (MB) NVIDIA G310 GeForce video card. It doesn't have an HDMI interface but DVI, I'm not sure if ones better than the other. I'm wondering if I should upgrade the video card. I'll be running windows 7 and Ubuntu but the thing is I won't be doing any gaming on the computer other than casual gaming. I have a play station 3 that I do gaming on. Would there be a need or would I notice a difference if I updated the graphics card for everyday and multimedia computing? Do I want to have a card that runs thru PCI Express 2.0 x16?
View 1 Replies View RelatedAccording to some info I've been given that helped solve a video flicker, I'm in need of a replacement graphics card for my new machine. can I have working flicker free video and CCSM effects? or is it a case of one or the other?
Quote:It is hardware dependent...in my experience it varies from card to card.Current Machine spec: Asus M4A87TD/USB3 870 Socket AM3 8 Channel Audio ATX Motherboard Corsair 4GB (2x2GB) DDR3 1333MHz Memory Kit Unbuffered CL9 AMD Athlon II X2 250 3.00GHz Socket AM3 2MB L2 Cache Retail Boxed Processor Asus GeForce G210 512MB DVI VGA HDMI Out PCI-E Low Profile Graphics Card I want to get rid of the graphics card anyway, for something passive (very annoying fan on the current one), but was planning to just get a passive g210. Does anyone have any other suggestions that might allow me to have desktop effects and reasonable flicker free video playback? similar in budget to the original would be good.
I have recently started using openshot to edit video and have found it very good. Previously I have been using Kino and openshot certainly seems more intuitive. Trouble is the more ambitious my productions the more juddery and prone to crashing the program becomes So I am thinking of an upgrade. At the moment I am using on board graphics. Or would more ram be the first thing to go for.
View 1 Replies View Relatedtrying to get Ubuntu to work properly on a Del Dimension 2400. It has on board Intel Extreme graphics card. [URL] It installs and but runs slowly when the ubuntu GUI is up and running. The CPU is maxed out for quite small tasks. Selecting additional drivers gives nothing, so I guess it isn't running the graphics card in hardware acceleration - which is slowing down the system. I want to buy a graphics card to use on this Dell PC. It uses PCI expansion cards. I'm thinking of ebaying a second hand graphics card.
View 4 Replies View Relatedthe only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time.
The exact message is:
The current settings cannot be applied. Possible issues may include:
- Display(s) cannot be enabled.
- Setting(s) cannot be applied due to insufficient video memory.
So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question:
First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. UPDATE: I got my active adapter in the mail today (it's DisplayPort to DVI) and so far things seem to be better. I can run my third screen, drag things seamlessly between them, and I am also running compiz. The adapter I'm using is a "B087B-005B" made by "Accell", UPC is "826388106239".
There's still a couple "annoyances" that need worked out though: The left most screen is always the primary monitor. Which means the "gnome bar" (is that what you call the applications-places-system menu?) is always on the left most screen. It also means that new dialogue boxes always opened centred on the left screen, which is counter intuitive. Especially if you're using a program like GIMP and the text editor or color picker pops up on the left. Does anyone know of a way to change it so that new windows always pop up on the center screen?
I just installed Ubuntu 9.10 and I was messing around with some settings and all that. I went to System > Preferences > Appearance > Visual Effects. I then proceeded to enable the "Extra" option. I was prompted to restart my computer for the effects to take place. Now it is running somewhat slow, for example when I open up Firefox, or any other program, it loads very slowly. I went back to change the Visual Effects back to "None" but it was already on that option, I don't know why. I went to my Hardware Drivers and I didn't have the recommended graphics driver on, so I put the recommended on and that had no help.
View 3 Replies View RelatedSo I'm trying to download some firmware for my ATI radeon graphics card using
Quote:
sudo wget -O /var/lib/firmware/`uname -r`/radeon/R600_rlc.bin http://people.freedesktop.org/~agd5f...e/R600_rlc.bin
but I keep getting 'such file or directory'
I'm just starting out with ubuntu (10.04), and installed it using a live cd on my alienware m5500. I had the update manager update everything, and then went looking on how to properly use my nvidia graphics card (geforce go 7600) because the graphics weren't looking very good, and I couldn't use any desktop effects.
I followed the directions found here in order to blacklist nouveou and enable the current nvidia driver. However after rebooting, and every time I time I turn on the computer, it never makes it to the desktop, i usually end up seeing the ubuntu startup and/or the nvidia logo before it proceeds to one of several screens (none of which allow me to click or type, although sometimes i can move the mouse).
-black screen
-black screen with light gray bars top and bottom
-black screen with vertical green line
-orange and purple horizontal stripes
-purple and light purple horizontal stripes
Thinking that it could be one of the listed bugs from the directions, I followed the work around for "Screen Blanks/Monitor Turns Off", but the problem persists. I have used the live disc to do a fresh install and attempt it about 3 times.Anyone know what this could be, or have advice for troubleshooting? Let me know if I can provide any other information that may prove useful - I'm fairly new to linux in general, but I can probably get some information from recovery mode if I've got a little guidance.
i am running 10.04 64 bit and did an update today and now i do not have any graphics card drivers and my virtual box is not working at all i have tried to reinstall the drivers through the hardware drivers and get told i have to look at the installation of this driver failed.
have a look at the log file for details: /var/log/jockey.log
and when i try to open my virtual box i get
Failed to open a session for the virtual machine Server 08.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND).
[Code]....
i have to at least get some info off the virtual box
for some reason my graphics card is no longer detected by Ubuntu, just and hour ago everything was working perfectly (as Ubuntu usually does for me) and now it acts as if it's not there.
View 9 Replies View RelatedOkay first off I'm a noob with Ubuntu. I've been trying to get Warcraft 3 and WoW to run on ubuntu via Wine, so far I managed to get them installed and running but I always have problems with graphics (poor rendering as oposed to when I ran them on windows). So I figured that maybe the graphics card/driver aren't installed correctly.
On the terminal I got this information: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) I checked System > Administration > Additional Drivers When it finishes searching for drivers I get the message "No proprietary drives are in use on this system" (I have no idea what this means, I read elsewhere that I should check this) So um, I don't know If any of this is useful or necessary to fix my problem.
My laptop is an HP Pavilion dv6 3078-tx. It is was a great laptop when it was running windows 7 but when I tried installing Ubuntu, I slowly began to hate it more and more. The issue is with the ATI and Intel switchable graphics card. Ubuntu installs fine and things seem to be great but I cant use the better graphics effects in ubuntu. I installed the driver that ubuntu provides for ATI and it didnt work and ubuntu booted into a terminal etc.. and I had to put it back to the way it was before. After sometime researching on the internet I know the problem is with the swtichable graphics.
Unfortunatley there is no option to turn off switchable graphic in my bios and hp arent much of a help. I dont know what to do now ? Is there any way to get switchable graphics to w ork with linux, is there way to get version of the bios that lets me disable it ? any variations of ubuntu or linux that it works with. I would prefer to use the ATI if i have to disable one or the other cause Im usually running on ac power anyways.
