I do have libstdc++6 and libstdc++6-4.4-dev installed though. I can't seem to figure out why it wouldn't detect it. Is it just a bug in ncurses' configure or what?
View 5 RepliesI was trying to install sopcast today but it said i needed stdc++5 library.i was wondering how u install that?
View 4 Replies View RelatedI want to read a pressed key or a combination of pressed keys from the keyboard and perform some action afterwords.
e.g.
Ctrl-Alt-F1
Out of ncurses lib. and the termios struct which can be used best for the above purpose and why ?I tried to search on Google, the differences between these two but couldn't get much !
i try to compile a c code which uses SSH library,but i get this error
Code:
libssh.h: No such file or directory
i searched and i found that This happens if a library used for linking is not present in the standard library directories used by gcc.
By default, gcc searches the following directories for header files:
/usr/local/include/
/usr/include/
and the following directories for libraries:
/usr/local/lib/
/usr/lib/
i update my libssh from libssh-0.4.2-1.fc13.i686 to libssh-0.4.6-1.fc13.i686, and there are files called libssh.so.4 and libssh.so.4.0.2 in /ur/lib, but i still can't compile it with this command:
gcc test.c
My system is slackware64 13 and I am having problems during compilation of libdnet library. How to compile this program? I compile like this:
Code:
configure --with-python && make
I know this is not slackware related but I want to give it a try...
My brother gave me a copy of Ubuntu 10, since my upgrade from 7.04 to 7.10 screwed up. Installed it easy. But strange problems occur. After a few minutes of starting the system, it enters a command prompt, regarding "Checking batter state" yet my computer runs on an adapter, no battery exists (except the built-in one on the motherboard), and I have to restart my computer.
View 7 Replies View Relatedi know how to install software but i don't know
1: how to install library .a or .so files
i: how to install tar.gz i use the method like ./configure. make make install but most of the time i got the message nothing to make .in lots of tar.gz there is no installation document no make file no .configure file that make me quite confused how to install them or run them.now i got sample source code of cuda i got them in tar.gz form when i extract them i found a folder in folder i found folder like c ,doc,shared etc when i open each folder i found more folder n file like that src, doc common ,lib, in these folder i found source code file header files libraries file make files .i don't know how to run this kind of project can the be installed on the system .how to run them they don't have .run file or script they don't have configure file .how to compile them ,how to run them & how to install them
I have been working on this for a long time.
I could get the static libcurl library ( a "libcurl.lib" file and a "curl.h" file), which supposed to be working under Windows.
Yet I tried Visual c++ 6.0 but it wasn't working at all.
Some idea on that ? I don't mind to try MinGW and Dev C++ if it will really work. (Cygwin is not good since it require client to have cygwin.dll in run-time folder).
I want to build a package from source using src2pkg, but I don't know how to avoid library miss match. Suppose I have Firefox 3.5.2 on Slackware 13.0 64 and I want to upgrade it to 3.6.2. Last time when I venturesomely installed Firefox-3.6.2-current into my Slackware 13.0, I got library miss match. Thus, instead of upgrading the whole packages to current (which is impractical and cumbersome), I want to build 3.6.2 from source. How can I do this? Is there any guideline how to use src2pkg? Or should I rather use makepkg? Do I need to create a Makefile?
View 7 Replies View RelatedI have tried to compile the fakeroot 1.15 on centos 5, but it always failed to load the shared library libfakeroot.so file. I tried compiling 32 as well as 64 bit version of library but always it failed to load the library and give the following error:
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
any workaround to get this working?
I've decided to make the plunge and switch to linux! Actually, I plan to dualboot Win XP and Ubuntu 10.04. I figure I might as well keep XP for a few games and for syncing my iPod nano with iTunes.I want to set up my computer so that my music library on my windows partition will be accessible to Banshee (or perhaps another program) so that I can listen to my tunes in Linux. However, I want to make it so that Banshee can't actually edit my files/tags (I want to leave iTunes in charge of that). I just want it to be able to play the mp3s and aac's (none of my files are in DRM format luckily). So I guess what I am asking, is can I make my iTunes folder on the Windows partition READ-ONLY to the Linux OS maybe?
View 1 Replies View RelatedI am trying to compile & install vlc 1.1.11 under Lucid.
./configure completes without any errors but make prints
Code:
CC libvlccore_la-revision.lo
CCLD libvlccore.la
CC control/libvlc_la-core.lo
[Code]....
I am a happy Ubuntu user, I run it on all of my servers.
A few days ago I setup a new slice, and now I want to use it to convert ULAW (μ-law) WAV files into MP3's.
If I would only install LAME this would give me an 'Unsupported data format: 0x0007'. Because LAME doesn't support ulaw encoded wav's only Linear PCM's.
I have read that one can use the Libsndfile and use it with LAME --fileio=libsndfile (or something like that) when 'MAKE'-ing Lame. In this case because of the additional encoding library sndfile Lame can read and encode the ulaw into mp3.
I have also read another solution is to first convert the ulaw-wav into a pcm-wav with sox, and afterwards convert the output into an mp3 with lame. This seems to be a lot of extra system resources.
I am looking for a hands on tutorial howto wget, compile, install and run LAME with Libsndfile on Ubuntu Lucid (commandline only) so I can encode incoming ulaw files into mp3's?
I tried to mex two C files under matlab but faild. The system warned stdc++ cannot be found. I need the mexa64 files urgently. if someone can mex the C files using his/her machine. My server runs Debian GNU/Linux and the Matlab version is 64-bit R2010b. So the extension for the generated file would be mexa64. I'm using hotmail with the same user name as in here.
View 2 Replies View RelatedI tried to mex two C files under matlab but faild. The system warned stdc++ cannot be found. I need the mexa64 files urgently. if someone can mex the C files using his/her machine. My server runs Debian GNU/Linux and the Matlab version is 64-bit R2010b. So the extension for the generated file would be mexa64. I'm using hotmail with the same user name as in here.
View 1 Replies View RelatedSometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies View RelatedI've modified a program to show * instead of letters when typing a password. I'm trying to make it so that when pressing backspace a * will be removed.Here's a rough example. The problem is that when trying to do this in the real program,' is not recognized as backspace.
View 6 Replies View Related./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I have some ideas about writing a small game in terminal ( just for fun ) using ncurses library. I want to use some kind of menus (in Midnight Commander's style), but there are some problems with rendering windows, that I don't understand. I create a window with newwin(), assign a color pair to it calling wattron() (for example, I want to fill a window with blue background), and then I call my own function wnd_fill() :
Code: void wnd_fill (WINDOW* wnd)
{
int i;
[code]...
On an Ubuntu Server I am running, I wrote a small Ncurses program in GCC. It worked just fine.
Then, I copied the executable over to my Ubuntu 10.10 desktop edition with sftp. No matter what I did, it kept giving the error:
error opening terminal: xterm.
I had copied other non-curses programs and they all ran just fine.
Finally, I copied over the source, recompiled with GCC and voila, the executable now runs fine.
I actually have two reasons for posting this. One is to see if there's an actual name for characters like this:Hopefully that will show up correctly for you. If not, it's a little box with four numbers in it, one in each corner. I don't know their name or their reason for showing up, so it's hard to look for help.
My main problem, though, is that I wrote a program that prints some output to a console using ncurses as it runs. These characters show up on the console, seemingly at random, and disturb the whole thing. Sometimes I'll also get sets of characters like "[13;" I'm not printing anything bizarre on there, just strings and floating-point numbers.
I'm running headless server, and need to sort all packages in YAST by size. I can't see the option in YaST anywhere.
View 5 Replies View RelatedWhere can I get ncurses developemnt libraries for Debian Squeeze. I am using the Sheeva Plug hardware platform.
Doing a make on source code that needs the ncurses dev libraries.
My system is mostly slack 11.0 (Absolute Linux 11.0 actually) I have been trying to build stfl from SlackBuilds.org. I think I'm missing some ncurses wide stuff but don't know how to compile for ncursesw.
I have stock ncurses5.5 on my system.
Compiler output is:
I have /usr/include/ncurses on my system but not /usr/include/ncursesw/ncurses.h
My goal is to compile newsbeuter but this dependency is in the way.
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
I'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
As my previous thread about compiling the good old Amarok 1.4.10 for 9.10 and make it work properly again was well accepted, I post here the script for doing the same for the recent version 10.04.
In the old thread, there are some really great improvements like a better wiki-patch: [url]
Code:
The ~/ before Downloads makes sure, that you can run the script from wherever you are in your system (stands for your home directory). Further, omit the checkinstall line, as this is not necessary in a script.. The sleep commands in between allow users to check, if everything went fine before going to the next step.
I can confirm the above script is working and Amarok 1.4.10 is set up correctly on a justsetup system.
And yes, I was to lazy too write a proper error handling^^
I didn't perform any larger testing.. Open the program an playback worked. My iPod worked also including artwork.
By the way: Because of self-compiling, a nice little extension program is working again, amarokFS (FullScreen).
That's the way to install it:
Code:
I'm running Debian squeeze and my packages are all up to date. I usually do my updates by typing 'aptitude update' and 'aptitude safe-upgrade' at the command line as root.Sometimes when doing regular updates aptitude, or the package that's being updated, shows a ncurses-style dialog box on the screen, usually to have the user 'OK' a change, or to select which version of a configuration file to keep. Recently I've found these dialog boxes to be slightly messed up... in that the spot at the bottom where I would expect the 'OK' button to be is replaced by nonsensical characters.
There seems to be no problem with the way that the program functions, as I can press the tab key and then the return key, or just the return key alone, and the dialog goes away, seemingly doing it's job. But I would like to know what this program is. It's likely been updated recently, but looking through /var/log/aptitude and /var/log/aptitude.1.gz I cannot figure out which one it is. I'd like to file a bug report, or simply be able to follow the progress of someone else's bug. That's all.
using squeeze and trying to install asterisk on it. after entering the ./configure command this error appears configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing) i've tried to find the soultion in google, but i couldn't.
View 1 Replies View RelatedHow can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
View 4 Replies View Related