Ubuntu :: GUI For Parts Of Server 9.10 And Zimbra?
Mar 11, 2010
I am completely new to Ubuntu so please make your answers really simple ! I want to set up a mail server for a home network and have been suggested I use the Ubuntu solutions. I am fairly proficient with Windows programs and even construct databases but I am a complete novice when it comes to command line instructions. Yes, I know I have been spoon fed!
I have been told that it is possible to install Server programs from the Desktop version and that they provide a GUI in most cases. Is that so? I have the desktop version running and up to date but I am unsure what to do next. Starting the Server ISO CD from Desktop seemed logical but when I did I was not sure if it was correct and backed out. I have also read a thread on this forum that suggests the use of Zimbra as a Mail Server, it sounded like my kind of solution so I think I would like to try that.
One last factor. I have an existing P2P network (2 Vista, 1 Mac Book and this Ub' desktop/server) running already which uses the Router for DNS. I suspect I am going to have to do things in a certain order if I am not going to go backwards and ruin the families email and surfing!
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
Is there some step by step? for ubuntu 10.04 server? or there is something better ? if there is something like colaborative email server like gmail will be great.
Got a Zimbra server FOSS edition running on CentOS5.5. Everything was running fine until couple of days just found out that web administration interface just does not give the proper status. Web console says that none of the services are running which infact is not true. Only service that is not running is logger. This is the zmcontrol status output
Just the logger service is not running all the others are. But web admin interface shows all are stopped. Also it can be seen that zmlogswatchctl is not running. Starting it manually does not do any good. It does not start and it dies out by itself.I tried to google and found a couple of bugs related to logger and web interface but those were old and should have been done in this version 6.
I want to setup either Zimbra, qmail or sendmail. i have no idea of these three mtas (i am new to these mail servers)but give me the suggestion that which one is better in case of security, fast routing the messages, scalibility and portability and cost.
I want you help me to configure the Zimbra mail server. I want install system mail server Zimbra, about 8000 user then How configure server ?( RAM, CPU, HDD) (account email 100MB - 300MB). forward to the help from everyone and Administrator Linux
I am having trouble configuring Zimbra to restrict sending for some users. A subdomain has been added in the ZCS web page for the domain, resulting in two potential mail addresses:
[URL]
The subdomain needs to be restricted from sending mail to the outside world and to other users on the same subdomain. It should only be able to message users on the main domain. The users on the main domain should be able to email anyone in the world. Is it possible to configure this without installing Zimbra on two machines?
Can someone recommend piece parts construct a reliable green server?
I am thinking: -Case with hot swapable drives, and energy efficient power supply -SSD harddrive for 5900 RPM drive -low power CPU, but one with a decent amount of power, IE. 2.0ghz dual core or better.
I'm trying to install Zimbra and Apache. I'm having difficulty setting up DNS (if necessesary) and also configuring my /etc/hosts show me what the /etc/hosts should look like.
When I try to install Zimbra 7.1.2, the installation fails because it cannot find sqlite. I used strace and found that it uses "rpm -q sqlite" to find the package. But it fails-"package sqlite is not installed". Although I have sqlite installed:
i have successfully installed zimbra on Debian machine but am failing to log in to the console admin. i have used my server name as well as my ip address but both do not work.
I am attempting to install zimbra onto Ubuntu Hardy 8.04 x64 bit edition using this tarball:
Code:
zcs-6.0.6_GA_2330.UBUNTU8_64.20100505202919
However when I run the install script I get this error:
Code:
Press Return to continue
Checking for prerequisites... FOUND: NPTL FOUND: sudo-1.6.9p10-1ubuntu3.7 FOUND: libidn11-1.1-1
[code]....
Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at [URL] the Perl Home Page.
I installed CentOS 5.5 this morning with zimbra 6.0.7. Everything seemed to go perfectly until at the end the following zimlets failed to install com_zimbra_phone...failed. com_zimbra_email...failed. com_zimbra_dnd...failed. com_zimbra_url...failed.
I installed zimbra successfully on Fedora 11 before. But I heard how stable CentOS is so I decided to switch. I read a lot online about how a lot of people have had zimbra on CentOS5 without any issues that were not easily solved. Zimbra appears to be working fine. I was able to add my domains, accounts, and send/receive email. So I'm not quite sure how important these zimlets are or if I even need them. But I'd like to know that the software is working the way it's supposed to. Since I'm new to Zimbra I want to make sure I get full exposure so I can learn it well.
I have a very dumb questions regarding run-parts utility. I've created few shell scripts, chmod them to be executable, placed them into one particular directory and tried to run them using run-parts utility like this
run-parts dir_name However it doesn't seem to be working or I might just be missing out something. I have even tried different options like --test or --list - NONE of them produced any output. If I run each of the script manually they all work just fine. Is this is a known bug or somethng ?? or am I really missing out something...how are the /etc/crontab entries then being executed when the run-parts doesn't seem to be working on such a simple case ? ps: I noticed one interesting thing though...when I run run-parts like this: run-parts --list --regex 'some_regexp_patern' dir_name -> the output actually produces a list of the files whose file names match the given regexp pattern .
Suppose that I have this text : 1 abc 2 def 3 ghi 4 klm
Now I want to copy(yank) only the parts: ab from line one and hi from line three at the same time So how can this be done with vim? I know how to copy one line and one part of a line. What I want to do is to copy two parts from 2 different lines at the same time and paste them as they are some where else in the file.
parts of my screen keep freezing and locking in place so that nothing new can be seen in that section, it happens when i click a menu or close a window, the part that freezes only goes away after i log out and then back in
I'm using Epson TX110 printer at the moment, it contains both scanner and printer.
I've installed Epson TX109 driver on Ubuntu, and it prints fine.
The problem is, how do I get the scanner to work? In the previous Windows, there's a program that allows you to scan and edit files, can I do it here too?
Ubuntu 10.04.1 LTS: It appears that run-parts does not run scripts with a period in the name. I had a script upg.sh which run-parts did not recognise; when I changed it to upg it did. This is surely a bug!
So I have Ubuntu 10.10 64 bit, and I'm having strange problems with parts of windows staying up on screen after I close them. Check the attached files to see what I mean. I have Visual Effects turned off, and I've tried removing compiz altogether, but I still see this happen every once in a while.
Could someone help me find a way to rename a file to a different name containing parts of its old name?
For example:
Original file name: filename1.abc.xyz.some.other.stuff Final file name: filename1.abc.xyz
The length of the file name is not constant. the abc.xyz is not constant but that format is (three numbers.three numbers) the .some.other.stuff is not constant and its what i want to get rid of
Without a long tale; suffice it to say I had to do a clean install when I upgraded to 10.10 version. I have messed up evolution e-mail and my document viewer settings. I have what I need as far as by ISP settings but the Evolution folders; well that is messed up. What I am looking for if it is out there would be links {read directions to} tutorials for Evolution and Gnome. Everything comes into the unmatched folder on evolution so I think I need to find where to read up on 'Folder rules and permissions'. The document view just is not working so I know I need to read up on that; I think it is part of Gnome but I'm not positive.
upgraded from Lucid to Maverick, panels lose pieces randomly then come back just as randomly. sometimes i have to right click on them other times they just come back after a few minutes on their own. enable desktop effects even though my driver is working fine. and if so is this a driver issue or an xorg issue or a kernel issue and how can i trouble shoot to find out and fix?
I am having a big /home partition. I need to make it small and create one more partition from it which will be used for some other purpose. Can you tell me please how to do it? I searched on google and found some methods which were very different from each other.I don't know which one is good, so, I thought I will ask you experts before doing anything.
I'm trying to get my program to go through the string typed in by the user and strip it of EVERYTHING but the numbers. I can't place my finger on what I'm missing.
Code: Code: #include<iostream> #include<string> using namespace std ; int main()
