I'm running Lubuntu 10.10 and I would like a way, any way, to edit the Main Menu. No Alacarte does not work with Lubuntu unless you have Gnome installed and I do not plan on installing Gnome. Is there any other way to do this?
View 2 RepliesI have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
Xubuntu: Grub Editing, Menu.lst not present
ver: 10.04 Lucid Lynx
performed update
Grub now features Redundant options upon boot
similar to the following
Ubuntu, kernel 2.6.32-22
Ubuntu, kernel 2.6.32-22 (recovery mode)
Ubuntu, kernel 2.6.32-21
[Code]....
is there anyway to edit or better yet remove the LiveCD menu you get when you first boot up with the liveCD and just boot right into a desktop?
View 2 Replies View RelatedI am trying to edit grub so that it doesn't timeout the menu. I've found a lot of solutions to this where I edit menu.lst. However, this file is blank when I open it. I just upgraded to Lucid and kept a lot of my old grub settings (I had customized it somewhat). Also, I am not sure if I have grub or grub2. How can I figure this out?
View 4 Replies View RelatedMy hard disk is :
/dev/sda2 Primary Linux ext3
/dev/sda3 Primary Windows
/dev/sda5 Logical Linux ext3 /boot
/dev/sda6 Logical Swap
/dev/sda7 Logical Linux Ext3 /home
/dev/sda8 Logical Linux ext3 /
[Code]...
After this install I wished to try out Backtrack 4 which I installed on /dev/sda2. The version of GRUB which was installed with Ubuntu 9.10 got wiped out and the version of GRUB with backtrack was installed . However the menu did not consist of the Ubuntu 9.10 booting option . How should I edit menu.lst so that I can get all my Ubuntu 9.10 booting option along with my backtrack installation
I used to be a pro at editing Grub's menu.lst file so I could have my menu look clean, simple, and easy to read. Now that I have set up 10.04 (Working beautifully now after a couple setbacks) the menu.lst file is no longer where it used to be (/boot/grub/menu.lst)
How do I edit my boot menu now?
I'm trying to find out which hard drive my vista installation is labeled in ubuntu so I can finish editing the grub menu.1st file.
All it says on the sourceforge page is
Quote:
Root - You likely have something along these lines "(hd0,1)". "hd0" refers to the your hard drive while 1 points to the partition. Note that for GRUB, partitions start at 0 and not 1. for example 0=Partition 1, 1=Partition 2 and so on.
It doesn't say how I can find out which one my vista is. So I need to know what my hard drive is in linux. Is it hd0,1 or hd0 or what?
As Unity have too much serious regressions to be usable desktop (I'll list some so maybe somebody could get an idea what to change for Ocelot 1110 edition):desktop switcher is obnoxious for somebody who is used to having 8-12 virtual desktops and to see in system tray what desktop is taken and what desktop is free. I do not see Pidgin icon in system tray anymore. And I hate (not dislike, but hate) Empathy, so I do not want to hear "Install Empathy". Have empathy for users who just want their apps in system tray! Launcher is bugged. I added Synaptic to it, place in launcher was taken, but there was no icon until restart. I added dconf-editor, there was no icon for it also after restart. weather applet is no more part of date/time tray indicator, but you can install it separately. Yes, you can install it separately, but you can not add your location, and that applet is not smart enough to read your old settings of weather and 1-5 locations for time zones should I go further? In short, 1104 is stable but default login (Unity) is not functional. It is better than M$ Vista which was not stable, but I expected that Ubuntu would adhere to higher standards than one shitty commercial company which wants only money of users and therefore rushed non-functional software to market.
My question (finally): In Ubuntu classic items I added to right click menu using nautilus-actions are not there anymore. They are still present in Nautilus, but not in desktop right-click menu. I googled a bit and found zilch, so I ask here. Please share how to do it (scripts folder is still there, but that would be regression to be unable to edit right click menu, FFS Ubuntu is not proprietary software so we would be helpless and could not tweak our favorite OS how we like it).
Would like to eliminate from the Grub menu of startup options all but the latest kernel update? Have made some attempts, but don't have authority is the message.
View 2 Replies View RelatedI've reduced my Grub2 menu(using Ubuntu 10.04) list to only 1 item.I want to automatically boot into the one item without providing a password (it does this now). I also want to disable someone from being able to bring up the Grub2 menu and hit 'e' to edit the menu item. Any ideas how to do that? I've been sifting through the forums, but I haven't had any luck finding a post about this
View 2 Replies View RelatedI'm interested in editing the Grub startup menu to take out some of the previous versions of Ubuntu. First, is there a reason Grub keeps the previous versions available to boot to in that list? If it is just in case of a problem with the new installation wouldn't it make sense to only have the most recent previous installation? Anyway here is the problem, when I run: Code: "gedit /boot/grub/menu.lst"
The editing program opens the file named "menu.lst" but the file is empty. How is it possible for this file to be empty yet I have multiple boot options and they all work? Does anybody know what I am running into here?
I would like to edit the destination a launcher which opens a program using WINE. It is Applications >> Wine >> Programs >> World of Warcraft >> World of Warcraft. When I use Edit Menus to check the launcher properties I learn it is set as Type: Application, and Command: [URL]...How would I instead have it point directly at opening, with WINE, /home/dusf/.wine/dosdevices/c:/Program Files/World of Warcraft/Wow.exe?
The -opengl argument shouldn't matter as I have it preconfigured to run with opengl in the config. If relevant, when I navigate to c:/Program Files/World of Warcraft/, and open Wow.exe manually, it opens using WINE automatically.
Recently made the switch to F15 and GNOME3. The changes are a little jarring, but I'm trying to have some good faith, see how I adjust to things, etc. Any ways, the applications menu (in "fallback" mode) or the 'activities -> applications' menus (in "full" mode) have every application I've ever installed, some times poorly classified. I'd like to edit these, making more minimal menus.
There is, of course, the "alacarte" application. While it runs just fine -- the changes are not reflected in the menus (in either mode). One could manually edit the desktop configuration text files, I assume, but as much work as I need to do -- I was hoping for a GUI application. Does an alternative exist? or a way to interface them?
First things first, I've just moved from Ubuntu with Gnome to openSuse with KDE. So I'm lost as doing some things in this environment. However, I'm loving what I'm seeing with suse/kde combo. I'm planning on making an extensive right-click menu to categorize all my applications. Basically I want to have the "start" menu available to me when I right-click. I've google casually for a couple days and haven't found much that helps, but I think its because I'm not using the correct keywords seeing as I'm new to this environment.
I have a feeling I'm going to have to make a [Desktop Entry], but I'm not sure how to handle hierarchy and stuff like that.
I am very new user to ubuntu and new to this community,first of all if i make anything wrong in this post please forgive and guide me,
My friend have a laptop which was running in windows 7.Last week he installed Ubuntu 10.04 Lucid Lynx.But after that boot menu is not showing and it is automatically booting to ubuntu.
So i pressed Shift key during boot and checked boot menu list,which is showing only linux OS ,Linux OS recovery mode and memtest86,No windows 7 option.
So I did following things.
Step1: Tried to find out the partitions using fdisk -l
2.So i tried to add a manual entry by editing the /etc/grub.d/40_custom file like below ,and changed the permission using chmod +x update-grub command
3.Run the update-grub command
But it is not updating the manual entry,The above update-grub command output showing the update-grub command not even entering into the /etc/grub.d/40_custom file because i put echo in that file in that ,and that also not coming.
I am running debian 8 with GNOME3.14 with the Applications menu extension and i want to know how to edit the listings and all that stuff ... Also is there a support IRC?
View 2 Replies View RelatedI've had Fedora 14 installed for some time now, but decided I needed dual boot for some things I have that are built only for windows and need usb support.
I installed windows to hd0,4 but when I edit a windows 7 entry in grub, as:
title windoze 7
root (hd0,4)
then boot it, it doesn't find it.
It was actually the 4th partition, so hd0,3 not hd0,4 I apparently also needed to put in "Chainloader +1" too... what ever that does...
I've just installed suse 11.2 with gnome. Now I need to modify entries in the applications menu, mainly so blender starts in windowed mode. Right click on applications will let you hide an entry, not modify it. Right clicking on the suse computer menu won't even allow that. If I could find the file(s) which hold the actual data I could modify as required, but where are they?
View 3 Replies View RelatedIBM 600X Thinkpad, 328 MB RAM
This laptop is currently running Ubuntu 10.04 just fine....if you count running
a bit......slow.
I have heard good things about Lubuntu and that it can speed things up, and that it uses pretty much the same installer as Ubuntu. However, just after I select either TRY or INSTALL (it doesn't matter) the screen goes black and the computer reboots.
A fellow on another forum mentioned he has a IBM 600e with only 128 MB RAM running Lubuntu. The 600e is a lessor form of my 600X, both coming out the same year. So, technically, my 600X should have no problems as they are the same machine, I just have more RAM and a higher Mhz.
I can boot Lubuntu liveCD I burned on a desktop machine just fine so, on the face of things, it looks like the cd is OK.
I am running Ubuntu 10.04 with Gnome as my desktop enviroment. I used Wubi to install from my laptop's default OS, Vista. I keep most of my media on the Windows partition, mostly for ease of use - such as streaming a movie through my xbox etc I would like to know if there is a way to edit the Gnome 'places' menu to have Music, Pictures etc direct to my /host/users equivalent.
View 4 Replies View RelatedI have upgraded Ubuntu 10.04 to 10.10 in my laptop which is also having windows7. But now I am getting three boot choices for windows. How to remove the unused windows boot options..
View 5 Replies View RelatedI have an old laptop that I installed EasyPeasy Lucid on. I have never used Grub2 as my other Ubuntu installs still use Grub Legacy. I have studied all the tutorials which instruct that the grub.cfg file should not be edited directly.This old laptop has one of the dreaded Intel graphics chips for which the kernel automatically loads the i915 module. Of course (like a multitude of others with Intel graphics and Lucid) I booted into a black screen but knew the workaround was to enable mode setting through grubI used the
Code:
i915.modeset=1
and added it to /etc/default/grub line GRUB_CMDLINE_LINUX, just after "quite splash", just
[code]....
my first go around with LXDE has been miserable. I got every machine I've had my hands on working great with KDE, Gnome (both in netbook too), and XFCE. however I decided to get as light as possible with my netbook after this glorious Lucid upgrade (I hate to change when I've got it how I want... but it was time for a LTS) and try Lubuntu.
So here's the snag. I have a HP mini 110 1125NR and travel very often, and speed is sometimes of the essence, and because for the netbook I don't need all the eye candy yet and want something fast. I got Lubuntu for it's built-in netbook interface and got the install fine (in safe graphics of course).... and I don't like any build I've seen with the Chromium OS except maybe Hexxah's Flow so I'm sticking to debian
Now, install went great and I'll modify things later, but I cannot seem to get past the BIOS boot, it sits there with a black screen with the cursor (solved with UNE by editing GRUB temporarily).... but nothing I've tried yet has worked, or I did it wrong...
How can you get Compiz to work in Lubuntu. I tryed to change the window manager, but can't. Is there a way?
View 9 Replies View RelatedI need to remove pcmanfm but I don't know how I can replace pcmanfm by xfdesktop.
I tried to remove pcmanfm, install xfdesktop and replace in /etc/xdg/lxsession/LXDE/autostart @pcmanfm on @xfdesktop. It doesn't work.
Thinking of uninstalling GNOME/ubuntu-desktop and installing LXDE/lubuntu-desktop in its place. Just a couple of Qs. Got some hunches, just want to confirm/deny them:
* Does LXDE use GDM for login, or something else?
* Installing lubuntu-desktop would uninstall network-manager. Need to reboot if I do this, I take it?
[Test with lubuntu 10.04 in VirtualBox]
I try the menu "Install Lubuntu" from LiveCD but it does not work. And I remaster Lubuntu follow the methods LiveCDCustomizationFromScratch
and make the custom initrd with preceed file inside to use the option "automatic-ubiqiuty" but it does not work too.
Is this a bug of Ubiqiuty in Lubuntu?
I recently installed Lubuntu to a USB. It was up and running and worked fine, however, upon exiting and going to boot into windows, I noticed it had installed a GRUB bootloader. I use whole disk encryption on windows, which has its own bootloader, so I can't be having some other bootloader on the PC interfering with this. I used my rescue disk to restore my WDE bootloader, but the USB stick will not boot now.
I also tried using pendrivelinux but this copies the live cd version onto the USB stick and nothing saves when you log off.installing Lubuntu to USB without a boot loader?
I just installed lubuntu on my eee 901, and everything seems to be ok, but my wireless card doesn't seem to be detected?
if I type ifconfig -a, it does not show (in ubuntu it worked like a charm)
[URL]