Ubuntu :: Debugging SSH Connection With Public Key?
Nov 9, 2010
I am trying to debug a problem where I can't connect to a remote SSH server. I do not have admin rights on the box, however I have a valid account and can login fine with a password, I just wanted to use my public key instead.
I copied over my ~/.ssh/id_rsa.pub to the remote server to ~/.ssh/authorized_keys. I tried to connect to the server but it is not allowing me to authenticate when I ask it to use public keys instead of passwords.
Code:
ryan@TehLaptop:~$ ssh -v -o PreferredAuthentications=publickey ryan@unix.xxxxxxx.xxx
OpenSSH_5.5p1 Debian-4ubuntu4, OpenSSL 0.9.8o 01 Jun 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to unix.xxxxx.xxx [xxx.xxx.xxx.xxx] port 22.
[Code].....
View 8 Replies
ADVERTISEMENT
May 21, 2009
Does anyone know how can one improve his debugging skills or how can one narrow down the problem and try to get to the solution ASAP.Or rather how once should approach a problem.I know this is a bit vague question but I want to know how you people approach?
View 3 Replies
View Related
Aug 17, 2015
In one of my customers, the new internet connection have no public IPV4(using GCNAT), only public IPV6.
And there are various services that require external access, like, vpn (openvpn), a java/web system, ssh, rdp(windows).
fileServer(by vpn).
All is running ok in IPV4.Maybe, the solution is a NAT 6to4. We know this is the future, no more public IPV4.
View 0 Replies
View Related
Feb 11, 2009
I have a very strange problem with my Linux Router/Firewall machine where i keep losing my connection on the ethernet card.
I have installed a Debian 4 distro on a PC with 2 nics to create a router/firewall machine. On nic-1 i have connected the ADSL modem and on nic-2 a laptop for testing.
What i want is to build a DMZ with public IP addresses assigned to the servers in DMZ.
Schematic example:
Code:
We have a total of 16 Public IP's assigned to the ADSL modem from our ISP configured in routering mode. Unfortunately our new ISP does not support Bridge mode, otherwise i would not have this problem. (we had modem in bridge mode working fine with our old ISP, but they have stopped so we were forced to switch to another ISP. eth1 and eth2 both have public IP addresses from the modem set hardcoded in the /etc/network/interfaces on Linux pc and on my testlaptop in the DMZ (server-1) i have set another public IP (they all fall in the same network range) I have enabled IP forwarding on Linux router/firewall and for testing the firewall is set to allow all traffic.
When i try to ping the testlaptop in my DMZ from a remote machine outside in our datacenter i get no reply.
However when i run the following command: ip addr add xx.xx.xx.xx dev eth1 to assign the public IP i have chosen for the laptop to the inner nic (eth2) and then try to ping the testlaptop again from the remote machine it still does not reply ... but (and here is the most bizar thing)...
When i then run the following command: ip addr del xx.xx.xx.xx dev eth1 (where xx.xx.xx.xx is the ip of the testlaptop) and try to ping again from the remote machine then it seems to be working fine ... however only for a short time because then connection is lost somehow.
View 7 Replies
View Related
Feb 22, 2010
I'm sure this is possible... I'm just not sure how. Yet! I have three machines. One is at home behind my firewall and has a dynamic IP. That's fine as I don't really want to open any ports on my home firewall. The second is at work sitting behind the firewall there- and I'm not even going to ask for approval to NAT an IP to my PC at work :-).
The third is in a data center far away. I only have a shell account on this server but other than that shell account not being root, I can do most anything I like with that account. What I would like to do is SSH to this server simultaneously from my home and work PCs and, via this third machine, make them talk.
This is pure geekery so it doesn't matter what they say to each other; I just want to make them talk. Maybe one uploads a file and the other just pulls down that file. Maybe one opens a FIFO on the remote server and starts writing to it while the other starts snarfing that data. In fact, I like this latter idea best, I think. How would you do it? What scripts (fired by cron if need be since I'm ostensibly away from at least one of the PCs at any given time) would you use?
View 1 Replies
View Related
Aug 2, 2011
I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies
View Related
Sep 24, 2010
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
View 2 Replies
View Related
Mar 3, 2010
How can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies
View Related
Apr 20, 2011
ls -al ../public-back
drwxrwxr-x 4 apache apache 4096 Apr 19 03:32 templates
ls -al ../public-back/templates
drwxrwxr-x 2 apache apache 4096 Apr 19 03:33 content
[code]....
How do I move the contents of /public-back/templates recursively with permissions into /public/templates ?
View 2 Replies
View Related
Dec 3, 2010
This hasn't happened to me before, but I develop for the Android platform and (perhaps needless to say) I really need to be able to debug on a real device. On past installs, my device was recognized automatically and debugging was as easy as checking "debug" in the Android's settings, but now (after updating to Maverick from Lucid) the phone registers with adb as?It mentions some necessary tasks for set-up on Ubuntu, but only mentions this process for Dapper/Gutsy/Hardy. Is there any personal experience out there that can confirm that this works and/or is necessary on Maverick?
View 1 Replies
View Related
Aug 20, 2011
im having problems with 1 mount from several shared, AFAIK identically from windows Vista Home
Quote:
root@server2:~# mount.cifs -v //gaia/thunderbirdMail /mnt/gaia -o user=guest,password='',domain=WORKGROUP, debug=8
mount.cifs kernel mount options: ip=192.168.2.6,unc=\gaia hunderbirdMail,,ver=1,u ser=guest,domain=WORKGROUP,pass=********
mount error(13): Permission denied
[Code]...
View 1 Replies
View Related
Feb 24, 2011
Is it possible to debug a makefile? In a bash script I can use "set -x" so that all variables are shown with their values. I am looking for such feature in makefile to see the variables and their values.
View 2 Replies
View Related
Feb 28, 2011
I tried to debug a C++ project in Eclipse Helios, last release. I set breakpoints in some non-main functions, but the debug function never stops there, and I get a warning message which says
"breakpoint attribute problem installation failed" What could be the reason?
PS: The same problem also happens with Eclipse Galileo, last release PS2: I found here info about the bug but no solution:[URL]..
View 1 Replies
View Related
Nov 10, 2010
I am writing a device driver on x86 machine,Ubuntu distribution,kernel version 2.6.35.I want to debug my driver in kernel mode.I tried KGDB(Kernel Level Source Debugger).But support is given for kernel version 2.6.13.But I want to make KGDB work on version 2.6.35.Could anyone help me where can I get help to make KGDB work on 2.6.35 version?Or is there any other method to debug my driver using some other tool?
View 1 Replies
View Related
Sep 14, 2011
I'm preparing for an interview and came across this question in a forum:
If your browser crashes, how would you debug it only using the command line?
For simplicity, let's assume it's a Firefox browser on a *nix environment.
View 2 Replies
View Related
Aug 23, 2010
i need to debug a application which is using many threads. i am using eclipse with GDB debugger but it is not possible to debug it since it has a lot of different threads and i can not not debug it as wre debug in case of single thread(main) . So i would like to know, is there a way to debug such an application, if there is some tutorial that would be nice to know.
View 8 Replies
View Related
Dec 28, 2010
What's the best way to debug an automatic installation. I created an iso with a custom menu and that all seems fine... but when I launch my new menu item I get a blank screen with a blinking cursor and nothing else.
View 7 Replies
View Related
Mar 11, 2010
Recently I have been having trouble debugging in Eclipse. I an writing a Java Applet and testing it using Eclipse's Applet Viewer but when I attempt debug mode it sometimes causes my GUI to freeze. I am able to break out to the prompt using ctrl-alt-f1 and restart the gui, but that's annoying because I then have to restart all the apps running on it.
Eclipse (Galileo)
Java JDK 1.6
Ubuntu 9.10 with Gnome 2.28.1
View 4 Replies
View Related
Feb 17, 2011
I am trying to find some ideas on debugging clients and servers. For example, what would be -really great- is to
1. start a debugger with a server (running on a port)
2. start up the client (using a debugger).
Run the client and then trace the processing from the client side to the server side.
How can one accomplish this?
I have downloaded valgrid and Qt Creator - but not sure how one can use both.
View 1 Replies
View Related
Dec 24, 2010
I am trying to do remote debugging of kernel 2.6.30 form fedora 11 (2.6.29).For this gdb and kgdb are there in the kernels. But am not able to use it.I have not any manual for this.so plz tell me the procedure of remote debugging.
View 7 Replies
View Related
Jan 12, 2010
I'm running Ubuntu server 9.10 karmic koala and my client is also ubuntu 9.10 karmic. I've installed xdebug on the server and added to the php.ini file:
zend_extension = /full/path/to/xdebug.so
xdebug.remote_enable = 1
xdebug.remote_port = 9000
xdebug.remote_host = localhost
xdebug.remote_handler = dbgp
Vim and the proper plugins (debugger.vim and debugger.py) are both installed. I load the php file under consideration in my browser on the client with ?XDEBUG_SESSION_START=1 as part of the URL. I then vim the php file, press F5 and reload the page in firefox. Vim shows that it is waiting for 5 seconds for the connection. After 5 seconds it shows an error message that says:
[Code]....
After some googling it has become apparent that these messages mean nothing and the problem is that the connection is just never happening. Xdebug is supposed to be working on port 9000. I've looked at /etc/services and nothing else is mapped to port 9000. I've tried ssh -p 9000 xxx@a.b.c.d and had the connection refused (ssh without a port spec works fine). Now I don't know what to do to get this thing working and I really want it working.
View 1 Replies
View Related
Oct 19, 2010
I'm running gdb across a network using gdb server. I've got it up and running. However I can't see any source or variables for my code (in ddd /gdb). At start up gdb says (no debugging symbols found). I've got a g in my make file,
CPFLAGS = -Wall -Os -g -pedantic
I've tried loading symbols in using "symbol-file testarm", this sort of works in that I can view symbols but not names, e.g. if I ask dd to show x y and z, rather than
x = 10
y = 20
x = 30
It says:
display
10/20/30
Also ddd does not show anything in the source window, is there a way I can get it to show this? I think it's because I've started ddd with ddd arm-linux-gdb, as I'm calling a crosscompiler gdb. So can I tell ddd to point to the correct folders? What commands I need to set in gdb/ddd to view variable names (it's hard to keep track when it bunches them all together) and how to view my source code.
View 2 Replies
View Related
Feb 11, 2011
How to switch between processes when debugging with gdb?
View 2 Replies
View Related
Feb 6, 2010
I have compiled a Fortran program by using
gfortran -ggdb file.f90
To try to step through it in the debugger, I enter
gdb a.out
but I cannot create a break point. I have tried a number of commands including
b <line number>
b <subroutine name>
View 1 Replies
View Related
May 1, 2010
I have just installed Ubuntu 10.04. When trying to run a Java Applet on a web page I discovered that Java is not installed in 10.04 and the SUN Java JRE is not available to install any more so I installed the OpenJDK and IcedTea Plugin.
Most applets work fine but one specific, for me a very important one, dos not. Specifically the log inn applet used in my net bank: URl... See login entry on top left.After entering userID I am redirected to a page giving the following error message:HTTP 404 - The resource cannot be located. The file cannot be found. This applet runs fine in Windows.I have started Firefox in a terminal window but do not get any error messages there when trying to start the applet.The applet runs fine in Opera (though slow start up) in Ubuntu 10.04. Opera does not use plug in but run the applet directly from JRE. This indicates that the problem could be in the IcedTea plugin.
View 9 Replies
View Related
Apr 30, 2010
I have squid running on F12 fully updated. Pretty much stock config except bigger cache size.
Over time it seems to start lagging and occupying more memory. Currently using ~400Mb after a couple of months. I'm sure its causing some lag / refreshes because if I turn if off and go direct to internet the same site I had to hit refresh on, loads instantly.
Going through the logs in /var/log/squid I don't see anything suspicious with the untrained eye, whats a better way of debugging it to see where/why the delays are happening? Its a single user setup (for fun really lol) so theres a lot of misses in access.log. cache.log just has a handful of bad img headers which does not line up with lagging websites.code...
View 5 Replies
View Related
Apr 30, 2009
I'm having trouble with this developing tool... I dunno why but when I build my program, Lazarus compiles it, but keeps debugging and don't generate the file. Do anyone knows which may be the problem?
View 9 Replies
View Related
May 12, 2010
I installed a packge redmine apt-get install redmine It went without any error. But I found later that it was not working. Another package I installed was red5 during installation it says it can not start red5-server. How can I debug the package installations. If there would have been some script I would have set some thing like set -vmx in it.
As an example while installing red5 I got a message to issue the following
Code:
See [url] for more information about dependency based boot sequencing. To reattempt the migration process run 'dpkg-reconfigure sysv-rc'. Even then it failed.
View 1 Replies
View Related
Jul 7, 2010
I'm looking for a tool which will record everybit of information is sent to internet by a particular software and let to inspect the data later
View 1 Replies
View Related
Oct 2, 2010
If you have a script that works sometimes and doesn't work other times in Kate and there just might be error outputs that kate isn't passing around in any obvious manner, how would one know how to find out what's going wrong?I'm talking about the user-made scripts under Tools/External Tools. When you run those scripts and an error happens, I don't see any error output.
View 2 Replies
View Related
