Ubuntu :: Damaged Partition With Palimpsest Disk Utility?
Dec 8, 2010
I have a HDD with OS Win with three partitions NTFS.I installed Ubuntu 10.10 on new partition, and I left the old partitions on the disk, because there are a lot of my personal data.When I was looking for how to mount partitions on startup, I was fortuitously to Palimpsest Disk Utility selecting the checkbox on sda2 as a boot, and apply. But I saw that it was wrong and took the check back. And after this was damaged NTFS on the partition sda2. Windows shows the partition as RAW.
I'm working on setting up a new NAS. I installed Karmic desktop on a 160 GB HD using the default settings.
Now I've added three 1TB drives and want to make them a RAID-5 array with LVM on that, and 1 ext4 partition. I want to use LVM so I can add drives and expand the array later.
So far I've been using Disk Utility (Palimpsest Disk Utility) and it's been great! A wonderful addition to Karmic! I got the RAID-5 array setup with no problems using disk utility. So now I have a 2000 GB raid-5 array setup in Disk Utility and I need to get LVM setup.
Problem is: I don't see any sign of LVM in Disk Utility. I've been googling all night and I can't find any documentation for setting up LVM in Disk Utility, just people saying that it's supported.
I tried installing the lvm2 package, rebooting, and then looking around again. No luck.
So, what am I missing? Should there be LVM options in Disk Utility? Where is it? Is there a better/easier way to configure lvm?
Palimpsest Disk Utility was working fine able to read the SMART status of my hard drives till I rebooted my machine. After rebooting Palimpsest Disk Utility reports SMART is not available. Any way to get it to start working again?
Does anybody know details about the integrated benchmark which comes with the disk management utility "palimpsest"? How does it perform the read/write benchmark?
Caused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df /var/log# df Filesystem 1K-blocks Used Available Use% Mounted on aufs 766804 68140 698664 9% / none 760892 244 760648 1% /dev /dev/sdb1 3911856 712128 3199728 19% /cdrom
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
i erase the partition of ubuntu by disk utility in mac oswhen i restart my laptop and select windows os partition but windows os not bootingand the screen show to meerror: no such partition.
Before doing a clonezilla project I opened Disk utility shows the first partition labeled as sdb2, then second partition as sdb1is this normal? I will add that this is a windows drive, but I wanted to back it up before installing debian to it. How will the disk partition labeling affect partition naming in debian?
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
A couple of weeks ago, my 500 GB disk crashed after suffering an accelerating error rate for a couple of days.
Now that I have a new disk in place, I want to mount my old disk, which is (was) an LVM disk, as a second disk and recover files from it if possible.
The question is, how do I go about this?
If I mount the old disk:
# mount /dev/sdb1 /sdb1
the top-level directory shows only two subdirectories:
lost+found, which is empty; restored, which is an image of files recovered from old disk's predecessor.
'df' shows (or appears to show) that the disk is 11% full. Sorry, I don't recall how full the disk was before it crashed.
How do I get the system to recognize the LVM structure on the old disk & mount it?
Or is the directory structure too corrupted? Do I need to send the disk out to a recovery service?
P.S. Have aleady done some poking around with lvmdiskscan, which shows the old disk whether it's mounted or not, and vgchange -ay, which doesn't appear to do anything.
Windows' Master Boot Record seems to be damaged on my dual-boot.Here are the details.
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => HP/Gateway is installed in the MBR of /dev/sda
I don't understand disk sizes in Linux. I have a 500GB drive. It's ext4. I have run "tune2fs -m 0" on it to reserve the amount of space reserved for root to 0.
I'm using Ubuntu 10.04 that comes with a Disk Utility. When I run "System->Administration->Disk Utility (palimpsest)" the disk shows up as 500GB (see picture). But when I run df -h it shows up as 459GB. So, I don't understand the discrepancy.
When I run df I get the following:
Question: Why is Disk Utility showing me something different than "df"?
following problem. A friend phoned me in despair. Her Ubuntu didn't start any more - ASUS-Laptop switched on stops at a ramfs-prompt. I started Puppy-Linux from DVD-Drive. Worked fine. But puppy can't mount her /dev/sda1 partition either. At least you can see that the partition is still there. Fsck stops with an error. May be the initial problem is a sort of bad hardware by which bad bytes were written to the hard drive. Hard drive and/or memory could be replaced but not the data.
Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?
I am on F15 32-bit with GNOME 3. I keep getting "A Hard Disk Is Failing" warnings from the Disk Utility, very frequently. Is this a serious issue? Because I knew this to be a bug in Palimpsest DU back in F13/14. Also how can I disable any notifications from this application?
point me in the direction to get a step by step guide to setting up a Raid 5 using the Disk Utility and 3 spare drives? I have the main OS files on a 80gig drive and I would like to mount the 3 drives as Raid 5.Just shooting in the dark now.. Screen shot is attached. [URL]...
I'm searching for a GUI disk imager, something, that will be the GUI front end for dd. Ghost4Linux G4L is not an option, I want to be able to make security backups of my USB thumb drives, CDs, DVDs...
Has anybody ever used Disk Utility to set up software RAID? Here I am running terminal commands (I'm a terminal junkie) and I just happen to stumble across instructions that indicate "Or you can just set it up through Disk Utility."
Sure enough in disk utility, it looks like all of the configurable options are there. It makes me wonder, though... is this kind of GUI functionality something that isn't really solid? Or does it operate predictably and effectively?
When I use disk utility to expand my RAID array it creates a partition on my 1.5TB drive which it would like to add to the RAID 5.
However, none of the drive existing on the RAID are partitioned so what I think has happened is the partition itself has created a difference of about 2 million bytes smaller than the others and thus unable to add the component.
How can I specify the exact bytes for my hard drive partition so that I can add this to the array?
Right clicking on a drive will format the drive but Disk Utility 2.30.1 included with Ubuntu 10.10 will not format the drive and says the drive is busy.
I have an annoying problem with the Gnome disk utility. Whenever I want to mount a file system it is mounted as a removable disk in /media. For instance if I want to mount a raid array /dev/md0 to a mountpoint /music it is mounted as /media/music. That's not how I want it, I want it to be mounted to the desired mountpoint which is located directly on the root.
I've been running a dual-boot ubuntu 11.04 64-bit and windows 7 64-bit for a while now, and recently got a new computer. I moved the hard drives to the new computer (one had both os's on it, the other was just a storage drive) and windows 7 would not boot, so I reinstalled it. I used a live cd to repair grub using boot repair /Boot-Repair) and everything looked to be going swell But when I tried to boot I got "invalid or damaged bootable partition" instead of a grub menu. so I went back and, copying and pasting the commands the program gave me, I manually removed and reinstalled grub on my ubuntu partition. same error. so, I backed up all my documents onto a third drive, wiped everything out, and started again. I installed win7 on one drive, and then when that was done, I installed ubuntu on the other. lo and behold when I tried to boot I got the same error message, and now I can't even boot from my windows drive. The ubuntu drive is fairly new and according to disk utility has no errors. Is this some problem with grub or what?
I found it is impossible to format partition during Ubuntu 10.04 installation. My storage configuration is as following. 1TB (500GB X 2) AHCI RAID 0 (it is said fake raid) and covers below 4 partitions.
/dev/mapper/pdc_dgbbagea1 9621688 5872752 3260168 65% / /dev/mapper/pdc_dgbbagea4 945587172 95673304 802259056 11% /home /dev/mapper/pdc_dgbbagea3 9698380 1363364 7846240 15% /opt Partition 2 is swap partition and root partition is ext3 original.
Since there is no enough space for upgrading, I try to format root partition and install a complete pure new OS. After I booting up system from Live or Alternative disk, I try to switch root partition from file system ext3 to ext4 and format it. However, Formating process always get failed after couple trying. Even I quit installation and use tools "Disk Utility" to check and adjust partition information. It reports device is busy.
