Ubuntu :: Can I Create An ISO Of My Own Custom System Install
Jul 14, 2010
After much playing around and with help from various forums including this one, I finally created a very fast simple minimal (to me at least) linux OS.
I started with the the ubuntu command line system install, then proceeded to install the rest of the goodies that I needed and nothing more.
I can honestly say it was a great learning experience and also very gratifying to create an OS that only has what one wants and looks the way one wants.
With all that nice stuff being said, my next goal, and I don't know if it's possible, is to take my newly created OS and create an ISO of it from my HD so I can put in my wifes computer as well without having to go through all the steps it took to get to the final product?
I tried to do some research on the topic but I think I was wording it wrong or not correct as i couldn't find anything concrete on the subject.
If not, such is life and I will just have to do it all over again and hopefully remember all the steps and customizing I did.
View 7 Replies
ADVERTISEMENT
Sep 22, 2010
I have a question that I can't find anything about online. I have spent the last few months creating and customizing a Kubuntu OS for my company and we want to install it on roughly 45 computers (all different models). Is there a way to save my creation to a cd so it can be installed on another computer?
I know about creating an image of the HDD but what I want to do is create what you would get in the store from Microsoft. A complete OS on a CD, ready to install with all of my configuration changes already setup.
View 1 Replies
View Related
Mar 26, 2010
I need to install Ubuntu on approximately 50-60 netbooks. None of them have CD drives, and I don't want to have to install them individually, walking around with a USB stick. I figured the fastest way to install on so many machines is to use a combination of apt-cacher (http://www.debuntu.org/how-to-set-up...ith-apt-cacher) and netbooting. I have successfully booted one machine to test, but as soon as the kernel comes up, support for the network interface is gone. Specifically, the "atl1c" module is not included on the netboot initrd image. Also, I would like to try to use preseeding, and I need to get that onto the initrd as well.
So, to summarize my question: How can I create a custom install kernel and initrd? I have a feeling it's related to the "debian-installer" category in the package repository, but I have not found any good documentation about doing this.
View 2 Replies
View Related
Aug 10, 2010
I am looking a creating a custom live CD so that I can use the apps that I need an take it around with me. However I can extract everything but I don't know how to put it back together.
This is what I did code...
View 3 Replies
View Related
Dec 28, 2009
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
View 1 Replies
View Related
Apr 8, 2010
How do you configure the system to automaticly change wallpaper and the standard Icon Theme to a custom made.
-If Im not mistaken, it must be something to do with the option to make a script at the end of the installation, -Ive seen the option in the creation,
View 4 Replies
View Related
May 21, 2010
I want to create a custom ubuntu ISO (This ISO will contain all the packages with the latest updates released till date).
View 9 Replies
View Related
Jun 11, 2010
I'm sure this is possible to do, but how do I create a Ubuntu install cd that uses my current config. Ideally I would like to be able to install exactly what I have on my system now, without user files. Wine, Ccsm, amarok, audacity, themes the whole nine yards. I tried using a program called Ubuntu Customization Kit, but it wouldnt let me mount the normal ubuntu install .iso file. This would avoid the hour and a half post-install config every time I screw Ubuntu up as well as stripping off many of the programs I don't need...
View 3 Replies
View Related
Aug 31, 2010
I want to create a custom live cd of off peppermint os one. I want to add specific software, and delete some packages i don't really need. How can I do this Reconstructor is not what i want, because i am forced to use Ubuntu or Debian,
remastersys doesnt work for me since I see no option in using peppermint one as a live cd.
View 6 Replies
View Related
Sep 10, 2010
I want to create a LiveCD that you can boot and where instead of the normal Ubuntu installer (ubiquity) my own installer is starting.
I tried to do that with FAI, but I have many problems with it. Do you know a good way to do it? Is there an Interface for the Ubuntu installer/Source Code? Any other tools, ideas or thoughts?
View 1 Replies
View Related
Jul 4, 2011
I'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems. I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. how to create an USB read only from a persistent one ?
View 2 Replies
View Related
Nov 22, 2008
Is it possible to create custom Live Linux cd that consumes less RAM by limiting its functionalities?My laptop has 448 mb RAM and I want to run the LIVE CD along side windows xp pro(using VMware Player). I have tried a few Linux live cds but all of them are very slow when I run them inside xp!! I want to create this custom live cd so it only have firefox browser (latest version) pre-installed along with flash player (Latest version) and ability to hear voice when playing ..... videos. (I want omit the rest of programs in order that Linux runs faster). Is it possible to gain speed by omitting un wanted programs? How I can create such LIVE cd with limited functionality and fast performance.
View 7 Replies
View Related
Feb 11, 2010
How do you create custom cursors? I found an xcursor tutorial but no installation instructions - it just left me with the cursor files.
View 2 Replies
View Related
Feb 2, 2010
We have a project we are working on and wanted to know if it is possible using the ubuntu(or any linux) boot disk.
We need the disk to first wipe the hard disk in the notebook, then perform a hardware test(testing processor/hdd/ram/display) then it should reimage the machine and reboot from the HDD.
I am thinking of using grub4dos to boot(and timeout to the HDD)
and partition image to image the HDD... but i do not know any cli software for the others...
For note the disk has to be completely automated as we don't have the headcount to recheck every machine every few minutes.
View 7 Replies
View Related
May 21, 2010
I was wondering if theres a way to make custom themes in lucid. when i had windows Xp i used High Contrast 2, is there a way to make it similar in ubuntu?
View 2 Replies
View Related
Feb 23, 2011
I need to create a custom keyboard layout for Canadian Aboriginal syllabics. How do I do this? Keyboards exist for Windows and Mac.
I can't find any current documentation for this.
View 4 Replies
View Related
May 10, 2011
im trying to create a launcher for flatout 2 and i dont know how. I have tried every thing and it ether comes up with a error or doesn't start or do any thing at all. My problem is that flatout 2 needs to load files from its whole folder. Other wise i would have simply made a launcher of the .EXE but it comes up with a error saying its missing files.
View 2 Replies
View Related
Apr 22, 2010
What I want to do is create a custom live USB startup of ubuntu.
I know how to create a usb startup from the iso (any ubuntu iso), with the usb startup disk tool.
Is it possible to add some software to it, for example suppose I want it to have exaile and wireshark (or any software) already installed.
How can I do that ?
View 3 Replies
View Related
Apr 15, 2011
Just started a new job where I test installation scripts and then wipe the system with a fresh install of Redhat each time before testing updated versions. I'm wondering is there a way to create an image of the system I want with the customized packages required rather than having to manually select and deselect a huge amount of packages every time. This would really help make my work much more efficient.
View 9 Replies
View Related
Apr 19, 2010
I am in the process of creating a RHEL5.4 custom iso image with minimal functionality. Have gone through a lot of articles over the net and it seems that there are no proper documentation of this process as most of the utilities earlier are not supported.
Following steps were performed :
1. Mount the RHEL5.4 DVD ISO and copied all contents including .discinfo[very important] to a temporary folder [/iso/MODIFIED_ISO/].
2. Edited comps-rhel5-server-core.xml [earlier comps.xml] under /iso/MODIFIED_ISO/Server/repodata under the root directory to only include necessary packages.
3. Removed the unnecessary rpm's from Server directory
4. Created metadata of modified packages, goto root directory of copied folder [in my case /iso/MODIFIED_ISO] and execute :
5. Create the iso :
After performing the above steps, I tested the iso on a virtual box, but checking the error console seems that there are some errors related to dependencies.
Have written a short script to check for the dependencies for the remaining rpm's, executing "rpm -qpR <RPMNAME>" for all rpm's on an already installed box. This would list all dependency packages.
View 2 Replies
View Related
Jul 4, 2011
I'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems.
I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. How to create an USB read only from a persistent one ?
View 9 Replies
View Related
Apr 29, 2011
So I'm here thinking how to create custom commands on my Linux Debian? I mean so i could open up terminal and just type the script name (and possibly some arguments) and it would refer to the script in my home directory. Otherwise I've write the whole path to the script each time and it gets annoying.
View 2 Replies
View Related
Dec 25, 2010
Create a rpm that installs a script like hello.sh into /root/bin with the permissions 755? I've tried a few ways with rpmbuild but no luck.
View 3 Replies
View Related
Aug 5, 2011
I wonder if it would be possible to create a custom boot menu entry in grub under Ubuntu (11.04), that boots the system into terminal instead of the login screen.
The effect should be something like the root shell in (rescue mode) boot menu entry, one that gives me access to a root shell or a less privileged shell, without the need to select "root shell" explicitly.
If possible, I also would like to customize the shell started by, most preferably by specifying a shell script to run so that I can start something other than bash, like vim.
My intention is to create a "fast" boot mode to give me a usable system within seconds (to take notes, for instance) without needing to start GUI. Therefore, it is preferred that the silent option is turned on.
Note: There is a requirement: that no existing feature of the system is removed. That is to say, the gnome desktop (and Unity) should remain intact, and is only disabled when I choose this mode.
View 2 Replies
View Related
Mar 15, 2011
I think the title says it all i just want to create a nice animated boot logo, but i have no idea how
View 1 Replies
View Related
Sep 13, 2009
Does anyone know how to make custom keyboard shortcuts? The commands don't seem to cross over to the system>preferences>keyboard shortcuts utility. For example, I added the file browser to my desktop. I right click, select properties, and the command is:
However, when I add a custom shortcut with that same command it doesn't work.
View 5 Replies
View Related
Dec 15, 2010
I have some sounds I'll like to use for events. Fedora comes with built-in sound themes. Can one create his? How?
View 1 Replies
View Related
Sep 15, 2010
I've a friend who would like to install openSUSE 11.3. But due to a bad Internet connectivity he cannot download the updates and the extra softwares. So I was thinking if it was possible to create a patch and a software cd for him which could then be used as a repository in YaST ?
View 4 Replies
View Related
Sep 18, 2010
For example - when coding in Perl, I need to sometimes comment out a bunch of lines.What I do is something like
:80,96 s/^(.*)$/#1/
I want to create a custom shortcut for this so that I can do something like
:80,96 cm
for commenting and
:80,96 uc
for uncommenting.What should I put in my ~/.vimrc?
View 1 Replies
View Related
Feb 26, 2010
I have fedora 10. My question is: while pungi can create custom spins of fedora can it also create live cd's
View 2 Replies
View Related
